Thank you for choosing our smart watch. You can read this manual and have a thorough understanding of the use and operation of the equipment.
The Company reserves the right to make changes to the contents of this manual without prior notice.
Product package including: Smart Watch*1, Strap*1, User manual*1, Charging cable*1.
1. Function description
1.1 Button
A black smartwatch with a square display showing colorful quadrants and time/date is depicted.
Button A: Long press to switch ON/OFF, short press to turn ON/OFF the screen.
Button B: Touch screen, support full touch screen.
1.2 Charging battery
Magnetic charging is used, as shown below.
A diagram shows the smartwatch being charged magnetically via a cable with two contacts.
* Please note that the two contacts of the charging cable cannot contact the conductor at the same time, which will cause the circuit to burn.
1.3 Standby dial interface
- Slide right to enter the menu interface. The menu function is the default smart style. Enter the menu function, and slide up/down/left/right to view the menu function icon.
- Slide down to enter the menu: Bluetooth connection status/Shortcut setting/Battery capacity/Brightness adjustment.
- Slide left to enter the function of Steps/Weather/Heart rate/Sleep recording/Shortcut function.
- Slide up to enter the information interface.
- Hold down the standby dial interface to select dials; it will be set successfully after selection.
1.4 Push message
Slide up on the standby interface to access the push message interface. When the watch is bound to the app and notification permission is enabled, new messages from the mobile phone's notification bar will be pushed to the watch. A total of 15 messages can be saved. After 15 messages are stored, new messages will overwrite older ones.
1.5 Slide down to menu
Sliding down the standby interface reveals the menu interface.
- Icon shows [Bluetooth icon]; battery capacity.
- Click the first icon to turn ON/OFF the [power saving icon].
- Click the icon to set shortcut functions (Screen display/Language selection/Vibration intensity/Menu style/[QR code icon]/About).
- Click '[QR code icon]', scan and download the APP.
- Click the '[find phone icon]' for the find phone function (Must be connected with the APP).
- Click the '[do not disturb icon]' to turn on or turn off 'Do Not Disturb mode'.
- Click the icon to adjust the screen brightness.
1.6 Pedometer
Step counting is enabled by default. The interface displays the current step count, and the data is cleared at 12 a.m. every day.
1.7 Sleep monitor
Sleep monitoring time period: 21:00 to 09:00 the next day. The watch generates data during this period. After exiting sleep monitoring, the sleep data can be synchronized to the APP after binding the app.
1.8 Bluetooth music
Android: After the watch is connected to the mobile phone APP, turn on the music player on the mobile phone. You can control music playback/pause, volume adjustment, and song switching on the watch.
iOS: The watch is bound to the APP. Turn on the mobile music player, and the watch can control music playback/pause, volume adjustment, and song switching.
1.9 Sports mode (walking, running, climbing, basketball, badminton)
1.9.1 Select the corresponding sport mode, click the screen to start a 3, 2, 1 countdown before entering the sport mode. Swipe the screen to the right to jump to the end of the sport interface, and click the '[end sport icon]' to end the sport and save the data.
1.9.2 Exercise data can be saved if the distance is greater than 200 meters or the exercise time is greater than 5 minutes. If these conditions are not met, a prompt box will appear: "The data is too little to save." Various sports data can only be saved in the current interface; after exiting, only step data can be saved.
1.10 Heart rate
Put the watch on the wrist (left hand / right hand) correctly, enter the heart rate menu to measure the heart rate value. The test takes 45 seconds. The heart rate light turns off 3 seconds after the test is finished.
1.11 Blood pressure
Put the watch on the wrist (left hand / right hand) correctly, enter the blood pressure menu, start measuring, and obtain a single blood pressure value.
1.12 Blood oxygen
Put the watch on the wrist (left hand / right hand) correctly, enter the blood oxygen menu, start measuring, and obtain a single blood oxygen value.
1.13 ECG
Put the watch on the wrist (left hand / right hand) correctly, enter the ECG menu, start measuring, and obtain a single ECG value.
1.14 Stopwatch
Click the stopwatch to enter the timing interface. Click the '[start icon]' to start timing, and click the '[pause icon]' again to pause. Swipe right on the screen to exit, and then enter the stopwatch again. The previous time is cleared and restarted.
1.15 Find phone
After the watch is bound to the app, click on the watch to find the phone, and the phone will vibrate or ring to remind.
1.16 Setting
1.16.1 Sedentary reminder
The switch is off by default. After the app is connected, the app can turn the function on or off, and the watch function can be turned on or off accordingly.
1.16.2 Raise your hand to brighten the screen
The switch is off by default. After connecting to the APP, the ON and OFF functions of the APP can control the watch's screen brightening function.
1.16.3 System
- Check the Bluetooth name / Bluetooth address / version number of the watch.
- Restore factory settings: Click 'Restore factory settings' to return the watch to its factory state.
- Shut down: After clicking 'shutdown', the watch will shut down.
1.16.4 The screen display contains the following functions
- Click to switch the dial.
- Long press to enter the dial selection function, slide left and right to select the dial.
- Brightness adjustment: Click to adjust the screen brightness.
- Screen duration: Click to adjust the screen duration.
- The duration of the bright screen when raising your hand: Click to adjust the duration of the bright screen for this function.
1.16.5 Language selection
Click to switch watch language.
1.16.6 Menu style
Click to select the menu style.
1.16.7 QR code
Scan the QR code to download APP.
1.16.8 Vibrating
Click to adjust the vibration intensity.
2. Binding the app
2.1 APP Download method
Scan QR code download.
A QR code is displayed for app download.
2.2 App store
Android system: Search 'FitcloudPro' in the App store, Pea pod, Google play, or other app stores to download.
iOS system: Search 'FitcloudPro' in the APP Store to download.
The installed application icon for 'FitcloudPro' on Android is shown.
The installed application icon for 'FitcloudPro' on iOS is shown.
3. Binding Bluetooth
3.1 Unbind app status
After the watch is turned on, Bluetooth is searching. After turning on the APK/APP, go to 'Device' -> Add device -> click 'Start' to search, select, and click the corresponding watch device name to bind the watch to the app successfully.
An icon indicating the [unbind status icon] is shown.
3.2 Bound app status
Watch time synchronization: After the watch and app are successfully bound, click to synchronize the watch and phone time.
An icon indicating the [bound status icon] is shown.
3.3 Find device
After binding the watch to the app successfully, click on the phone app to find the watch; the watch will light up and vibrate once.
3.4 Data synchronization
After the watch and app are successfully bound, the watch's health data can be synchronized to the app. Turn on sleep and steps, click to select the date, and click the '[share icon]' in the upper right corner to share the current interface data to QQ, WeChat, WeChat friends, Sina Weibo, Twitter.
3.5 Push message
After the watch and app are successfully bound, switch on the corresponding notification permission in the mobile phone system. Enter the app 'More' -> 'App notification', and switch on notifications for corresponding third-party applications.
3.5.1. Incoming call notification:
Turn on the call notification in the personal application. When the phone receives a call, the watch will brighten and vibrate.
3.5.2. SMS notification:
Switch on the SMS notification in the personal application. When the mobile phone receives one or more SMS, the watch will receive one or more SMS reminder notifications simultaneously.
3.5.3. Other application notifications:
Switch on the corresponding application message notification in personal applications, such as WeChat, QQ, Facebook, Twitter, and other applications. When the mobile phone receives one or more application message notifications, the watch will also receive one or more corresponding message reminder notifications.
3.6 iOS system health
After setting, you can view FitcloudPro data on iOS system health.
3.7 Drinking water reminder
Set the time period and frequency (minutes) from 'Start' to 'End', click to enter 'Repeat' to set the date of drinking reminder (week), check 'Drinking reminder', and save. When the reminder time for drinking water arrives, the watch vibrates and shows a ? icon.
3.8 Sedentary reminder
Set the interval between "start" to "end" and sedentary time (minutes), click to enter the "repeat" setting to select the sedentary reminder date (week). When the sedentary time arrives, the watch will vibrate and display a ? icon. Do not disturb mode is from 12:00 noon to 14:00 noon.
3.9 Alarm reminder
Click 'Alarm Reminder', set the time of 'Add Alarm'. When the alarm time arrives, the watch will prompt: a ⏰ icon and time, and vibrate 6 times.
3.10 Heart rate detection
Set and save the time period from "start" to "end" in the app. The heart rate interface of the watch can save the data of the heart rate measured each hour.
3.11 Firmware upgrade
Automatically detect whether the watch firmware version is the latest version. If there is a newer version, it will prompt you to upgrade to the latest version.
3.12 Unbind app
When the watch is bound to the app: After unbinding the device, click 'OK' to unbind it. The iOS system needs to go to the phone settings to ignore the Bluetooth device.
3.13 Push dials
Connect the app, navigate to 'Device' -> 'Dial Settings' -> Click on 'Dial'. After synchronizing the dial, the watch will disconnect and then connect automatically.
FAQ
Please avoid exposing the device to extreme temperatures of excessive cooling or overheating for a long time, which may cause permanent damage.
Why not wear a watch and take a hot bath?
The temperature of the bath water is relatively hot, which generates a lot of water vapor. Water vapor is in a gas phase, and its molecular radius is small, making it easy to penetrate into the gap of the watch case. When the temperature drops, it will form liquid droplets again. In this case, it is easy to cause a short circuit in the internal circuit of the watch, damage the circuit board, and then damage the watch.
Can't turn on the device / can't charge
If the watch does not turn on, it may be that the watch was impacted during transportation, causing the battery's protection board to activate self-protection. It can be activated as long as the charging cable is plugged in for charging.
If the battery is too low, or the watch has not been used for a long time and will not turn on, please plug in the charging cable to charge for more than half an hour to activate.
GUARANTEE
- The manufacturer guarantees that the Maxcom Smartwatch product is free from material defects and implements measures for normal use within 24 months from the date of purchase.
- In the event of a defect or malfunction, please contact the retailer or authorized distributor. The proof of purchase needs to be attached to the submitted complaint. The guarantor will repair or replace free of charge products that do not meet the specified parameters within a reasonable time.
- This Warranty applies to the original purchaser only and covers the territory of the EU.
- The warranty does not exclude, limit, or suspend the buyer's rights resulting from the provisions on the warranty for defects in the sold item.
- Technical and warranty support is available at www.maxcom.pl.
THE WARRANTY DOES NOT COVER:
- Normal wear and tear, including batteries (rechargeable batteries), unless the damage was caused by defects in materials or workmanship.
- Mechanical, thermal, chemical, and other damages.
- Defects resulting from: improper use and not obeying the instruction manual; making unauthorized changes; use or storage in a manner inconsistent with the technical specifications of the product; improper maintenance; application of items other than those supplied or the use of any items not intended for use with the product; technical work performed by unauthorized personnel.
The above applies to the rules for the validity of the warranty on goods consumption resulting from Directive 1999/44 / EC.
SIMPLIFIED DECLARATION OF CONFORMITY
This equipment complies with the Directive of the European Parliament and of the Council 2014/53 / EU on radio equipment and telecommunications and their mutual recognition. This equipment can be used in all EU countries, the European Union, and in all countries where the Directive applies 2014/53 / UE.
Disposal Information
NOTE: THIS EQUIPMENT SHOULD NOT BE DISPOSED WITH MUNICIPAL WASTE!
The product should be used by selective collection at prepared points. Proper handling of used electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of dangerous elements, as well as improper storage and processing of such equipment. The device contains a Li-ion battery. Used batteries are harmful to your health and the environment. They should be stored in a specially designated point, in a suitable container in accordance with applicable regulations. Batteries and accumulators must not be disposed of with municipal waste; they must be handed over to collection points.
CAUTION: DO NOT PUT BATTERIES IN A FIRE
Manufacturer and Distributor:
Maxcom S.A.
Ul. Towarowa 23a
43-100 Tychy
Poland
CE marking, RoHS compliant, WEEE symbol (crossed-out wheeled bin), Recycling symbol.
