MAXCOM FIT SW32 Neon Smart Watch

Notes

1. The company reserves the right to modify the content of the manual without further notice. It is normal for some functions to differ in different software versions.
2. Before use, charge the product with the provided charger for at least 2 hours.
3. Before use, connect to the APP and set personal data for time synchronization. For details, please read the instructions for the synchronization software.

1. Product Overview

Compatible models:

• Android phones: support OS 5.0 and later versions.
• iPhone: Supports OS 9.0 and later versions.

2. APP Download and Connection

1. Please scan the QR code below to download the APP.

[QR Code]

We recommend using a browser for scanning and downloading. WeChat scanning is currently not supported. Please grant the software the necessary permissions during the BT connection download and installation process.

The QR code can also be found on the watch. It can be downloaded from the watch's QR code. The APP name is "Da Fit".

Notes on App Usage

1. For Apple phone users: If the phone is in standby or hibernation state for a long time (e.g., 2 hours or more), and has not been used, and is in a black screen state, Da Fit will be cleaned up by the iOS system, causing the APP application and watch to disconnect. Functions on the APP will not be available. Please re-open the watch, and it will be automatically reconnected.
2. For Android phone users: After installing the APP software on the Android phone, you need to enable the background application launch permission in your phone's settings. Each smartphone has differences. Take Huawei phone as an example. The steps are as follows: Settings -> Application -> Application Launch Management -> Da Fit. Find the APP application, change automatic management to manual management, and open all permissions (allow self-start, allow association start, allow background activities). This is for the APP application to maintain the Bluetooth connection with the watch while the phone is in standby (the phone has a black screen), and it will not be cleaned up by the Android system. It will not use network traffic in the background, nor will it affect the phone's power consumption.

To connect the watch with the APP for the first time, you need to turn on GPS localization in your smartwatch.

2. Connections for APP and Watch

1. Open the app and set your personal information, such as "Height", "Weight", "Birth Year", etc.
2. For Android mobile phones: After setting up the Android phone information, go to the homepage, tap "Add Device" ([Figure 2]) to access the "Add Device" page, then tap to select the desired model icon.
3. After a successful connection between the application and the watch, it will automatically return to the homepage. Tap the device icon to switch to the device page to check the connection status. After a successful connection, the device model, image, power status, address, and other information will be displayed.

[Figure 1]

[Figure 2]

4. For iPhone users: The Bluetooth connection of the iOS phone applies to Android phones (the same as in points 2 and 3). 5. If pairing fails by scanning the QR code, you can tap to see if the watch and phone are connected to others. If so, please ignore the device on the phone before the new connection.

3. APP Settings

(Functions are available after successful connection)

3.1 Watch Faces

(Note: In the smartwatch, you can long-press the WATCH FACES element and slide left or right to select the desired dial, then tap to save.)

3.2 Notifications

Tap to open the notification reminder. You can select the applications you want to forward notifications from, select desired social applications, or select all information.

3.3 Alarms

(Default is three)

3.4 Shutter

• For Android phones: Tap the shutter function in the APP, and the watch will display the camera icon. Tap it to take a photo directly. Photos will be automatically saved to the album.
• For Apple Phone: Tap the "Shutter" element on the iPhone, and the phone's camera needs to be opened manually (due to the iOS system), then tap the watch to take pictures.

3.5 Other

• 3.5.1 Find Device: Tap "Find Device" and the watch will vibrate to remind you.
• 3.5.2 Time Formats: Tap here to set 12-hour or 24-hour time. After tapping, the watch time will be synchronized with the set time format.
• 3.5.3 Do Not Disturb: "Closed" is the default mode. Tap to enter the settings page and set the "Do Not Disturb" mode according to your personal needs. Information will not be accepted again after setting.
• 3.5.4 Sedentary Reminders: The default mode is "Off". The sedentary reminder is only effective between 10:00 and 22:00.
• 3.5.5 Language: You can choose a language from various options.
• 3.5.6 Quick View: The default mode is "ON". An effective duration can be set. You can set a duration according to your individual needs.
• 3.5.7 Weather: Switch the weather open/close function, and manually set the city or use automatic positioning. Positioning requires permission; it does not need to be used separately. Weather information will be updated every 2 hours if closed; if closed, you need to wait 2 hours, otherwise it will disappear from the watch.
• 3.6 Update: When a new version of the server is detected, the watch firmware can be updated to the new version.
• 3.7 Remove: The pairing between the watch and the phone application can be canceled. Note: For Apple phone iOS, go to "Settings" -> "Bluetooth" to ignore current Bluetooth pairing for complete unbinding.

3. Main Functions

3.1 Basics

• 3.1.1 Power On: If the watch is off, press and hold the side button for 3 seconds to turn it on. In standby mode, briefly press the side button to wake it up.
• 3.1.2 Power Off: If the watch is on, press and hold the side button for 3 seconds to turn it off directly.
• 3.1.3 View Device Information: On the watch face, swipe from right to left to access other functional interfaces. Swipe upwards to enter the next page. Tap and enter the last column where you can see the Bluetooth name, device type, device address, and other information.

3.2 Steps

You can view step counter data on the watch and in the APP. If the watch is successfully paired with the APP, your sports data will be automatically synchronized (or manually refreshed) from the watch to the APP, including the number of steps, distance, calories, and other parameters.

3.3 Sleep Monitor

The watch's default sleep monitoring time is between 20:00 and 10:00.

3.4 Heart Rate Monitor

If the heart rate is empty, it will display "000Bpm". Tap the heart rate icon and press and hold the touch button for more than 2 seconds to start testing. Data will appear immediately after testing. It measures continuously for 30 seconds and only keeps the last data. If you exit the current page during measurement, the test result will not be recorded.

3.5 Exercise

• 3.5.1 Exercise includes: Walking, Running, Cycling, Jumping, Badminton, Basketball, Football.
• 3.5.2 Switch to the appropriate exercise icon: Tap to enter the corresponding exercise mode, where you can view data such as steps, distance, calories, heart rate, and exercise duration. Swipe left or right on the exercise data page to pause or exit the exercise mode.
• 3.5.3 Activity data can only be uploaded to the APP for viewing. Exercise data after exercise cannot be viewed on the watch.

Note: Rules for saving sports data:

1. Exercise duration longer than 2 minutes;
2. Heart rate data tested. You must meet either of these two conditions for data to be saved; otherwise, no exercise data will be retained.

3.6 Blood Pressure

3.7 Blood Oxygen

3.8 Weather

3.9 Message

Swipe down from the watch face to enter the message recording interface to view message push. By default, 3 messages are retained. Voice messages can only be displayed; they cannot be heard on the smartwatch.

3.10 Other

Swipe from right to left on the watch face to use the "Other" functions.

• 3.10.1 Shutter
• 3.10.2 Timer
• 3.10.3 Brightness
• 3.10.4 Reset
• 3.10.5 Power Off
• 3.10.6 About

4. Precautions

• 4.1 Only one connected application can be installed on the mobile phone to ensure that the connection is normal before synchronizing data. If there are multiple connected APP applications, they may affect the connection between the watch and the mobile phone. Note: Some Android phones will warn that you cannot install them. Go to the phone's "Settings" and enable "Unknown sources".
• 4.2 When the mobile phone requests permission for an application, click the "Allow" button to avoid opening the APP application's application permission, which may result in not receiving notifications, scanning QR codes, remote cameras, and other functions. This permission is for normal application use and does not affect the phone's power or other information on the phone. It is limited to the Bluetooth connection between the APP and the watch.
• 4.3 Some Android smartphones may accidentally close the mobile application during application cleanup. Please keep the mobile application running in the background. Android phone settings for running in the background: Open phone settings -> Application Management -> Da Fit -> Permission Management -> Background Management -> Select "Run in background". (The setting method may vary depending on different versions and types of mobile phones).
• 4.4 For heart rate measurement, if the watch is too tight or too loose on the wrist, the test may be inaccurate. Being too tight affects blood circulation, while being too loose affects heart rate monitoring.
• 4.5 Please avoid collision with hard objects to prevent the glass from breaking.
• 4.6 Please charge with a 5V, 1A power supply. This product does not support fast charging. Do not charge with water (sweat) to avoid short circuits and damage to the product.
• 4.7 This product is an electronic monitoring product, not for medical purposes; it provides daily reference data.

5. Troubleshooting

In case of any problems during the use of the smartwatch, please resolve them accordingly using the following methods. If the problem persists, please contact the seller or designated maintenance personnel.

5.1 Watch Cannot Be Turned On

• 5.1.1 Press and hold the touch area of the display for more than 3 seconds.
• 5.1.2 Check if there is sufficient battery. The battery charge may be too low; please charge it.
• 5.1.3 If the watch has been left for too long and the normal charger does not respond, try charging with a 5V/1A output power supply.

5.2 Stops Automatically

5.2 The battery charge may be too low; please charge it.

5.3 Short Battery Life

• 5.3.1 This may occur if the battery is not fully charged. Please ensure sufficient charging time (at least 2 hours are required).
• 5.3.2 The charger or data cable may not be working properly; please replace it.
• 5.3.3 Please check the data cable port and try again to ensure a proper connection.

5.4 BT Disconnects or Cannot Connect

• 5.4.1 Restart
• 5.4.2 Please turn off your mobile phone's Bluetooth and turn it back on to reconnect.

5.5 Inaccurate Sleep Data

The sleep monitor is designed to mimic natural sleep and wake patterns. Please wear the watch properly, otherwise, discrepancies may occur if you go to bed late or only wear it while sleeping. Sleep data may not be generated if you sleep during the day, as the default sleep time is set from 21:00 to 9:00.