USER MANUAL

Introduction

Thank you for choosing our smart watch. You can read this manual to get a comprehensive understanding of how to use the device. The device connects to a mobile phone through Bluetooth for adaptive use, provides a variety of practical functions and services, and has developed many functions for sports and health. This device is not a medical device, and the measurement data and results are for reference only, not as a basis for diagnosis and treatment. The Company reserves the right to modify the contents of this manual without prior notice. This product supports IP68, rain, hand washing and other wear without worry, after soaking in water, there will be water in the horn hole, please shake the water out, the sound can return to normal; and dry via soft cloth before the operation of the watch.

Note: During hot shower or sauna, should not be worn to prevent vapors. If the watch is damaged by water because of not following the instructions, the company does not make a free warranty.

App Installation

You can use the "scan" function in WeChat or browser to scan the "QR code" of the watch and download and install FitCloudPro. You can also download and install FitCloudPro by searching for FitCloudPro in App store, Google Play Store, etc.

[QR Code for FitCloudPro app download]

Watch Connection

QR Code Connection

After you open the APP, if the dialog box for obtaining permission pops up on the mobile phone, please click Allow to obtain. In the "device" interface of the APP, click "Bind device" and then click the scan icon in the upper right corner to open the QR scanner and scan the QR code in the watch's settings. During the pairing process, the connection confirmation button will pop up on the watch. Please click "allow pairing".

Manual Connection

After opening the phone's Bluetooth and GPS location (for Android phones), open Fitcloud Pro and click "Bind device", then click the "search" icon on the bottom of the screen. When you find your watch FW63, click "connect" next to its name. During the pairing process, the connection confirmation button will pop up on the watch. Please click "allow pairing".

When you finish the above operations, slide down on the watch face, you will see the color change of the BT icon and status of connection is below:

• [Bluetooth Call Connected] BT Call Connect
• [Bluetooth Call Disconnected] BT Call Disconnect
• [App Connected] APP BT Connect
• [App Disconnected] APP BT Disconnect

BT Disconnection

In the APP, click the "device" interface, then click the watch's icon on the screen's top and "unbind" > OK to unbind FW63. In iOS, click "Ignore device".

Key Manual

Function Key

• Press one time to enter the main menu on the watch face.
• Quickly press two times to switch the main menu of different styles.
• Press one time to return to the watch face from other function interfaces.
• Long press the button for 4 seconds to enter the Siri voice assistant.

Power Key

• Long press the button for 4 seconds to power on or power off.
• Short press to return to the watch face and short press again to extinguish the screen.

Swipe Manual

• Left swipe: Enter the function interface, including sports data, heart rate, sleep, weather, and other interfaces.
• Swipe down: Enter the control center to view Bluetooth status, battery power, and some common functions.
• Swipe up: Enter the message notification interfaces, swipe up or down to view each message, swipe left to delete a message. Slide right to return to the watch face.
• Right swipe: Enter the main menu, and you can swipe up or down to select the corresponding functions. Swipe right to enter the watch face.

Charging Manual

1. The battery icon of the watch will become red when the battery capacity is less than 20%. The OS will automatically turn off the motor vibration function. If the power saving mode is enabled, the watch will turn off Bluetooth, reduce the brightness to the lowest, turn off "raise to wake", turn off the automatic detection of heart rate, vibration motor, and other functions.

2. The watch charging needs to use a 5V power adapter with a maximum current of 1A (5V/1A).

When the magnetic charging cable is aligned with the charging part of the watch, the watch will automatically attract the charging plug. When charging, the watch will be prompted by the charging interface, and the charging icon will be stationary after being fully charged.

3. Because the charging plug is magnetic, it's easy to absorb other conductive metal objects. Please timely close the power adapter after the completion of charging, pay attention to the magnetic plug and do not touch other metal objects or be adsorbed on the metal objects, so as to avoid short circuit.

Functions Manual

• Call function: This function needs to connect the audio Bluetooth. Enter the dialing; you can dial the phone number according to the need. Long press 7 and 9 for two seconds on the keypad to enter * and #.
• Common contacts: You need to set and add them in the common contacts bar of the APP. The common contacts you set will be automatically synchronized to the watch. A maximum of 10 contacts can be added.
• Call History: This function can save the latest 10 call records.
• Voice Assistant: This function requires an audio Bluetooth connection and can evoke the phone's Siri voice assistant by tapping the voice ball.
• Data: Displays the data of steps, distance, and calories. You can set the target number of steps, distance, and calories in the APP.
• Sports: Including running, walking, badminton, tennis, basketball, table tennis, cycling, yoga, rope skipping, mountain climbing, indoor running, elliptical machine, rowing machine, lazy bike, exercise bike, baseball, rugby, cricket, strength training, etc.

Detailed Functions

• Sports record: It saves your latest 15 history records, and you can view the exercise time, heart rate, calories, and other data during exercise.
• Heart rate: When entering the interface of heart rate measurement, the green light at the bottom will start to measure. When the measurement is completed in about 40 seconds, there will be a vibration reminder. If the prompt is "not wearing the watch", you need to wear the watch again. Note that the data obtained in this interface is only displayed in real time, and the results will not be saved to the APP side. The data recorded at the APP comes from the monitoring results obtained after the automatic monitoring function is enabled.
• Sleep: Displays the sleep monitoring status of the day, and the data is updated every day. When connected to the APP, the data can be saved synchronously. The sleep monitoring time is from 9:30 PM of the day to 12:00 AM of the next day.
• Blood oxygen: When entering the blood oxygen measurement interface, the red light at the bottom will start measuring, and there will be a vibration reminder when the measurement is completed in about 40 seconds.
• Weather: After the watch is connected to the APP, the weather interface will display the weather temperature and weather type.
• Female health: When registering on the APP for the first time, a female health function will be added to the APP after the gender is set as female. After setting the parameters according to the actual situation, the watch will budget the relevant information of female menstruation, pregnancy preparation, pregnancy period, and so on.
• Music: After connecting the APP, you can control the playing of music in the mobile phone.

Additional Features

• Breathing exercises: In breathing exercises, there is a choice between 1 minute and 2 minutes. The user taps the corresponding time for breathing training. After clicking Start, follow the icon in the breathing exercise, zoom in and inhale, zoom out and exhale.
• Stopwatch: Click the start button to calculate, click the pause button to stop, click another button to reset. During the timing process, click the clock icon on the right to mark the time, and a maximum of 99 pieces of data can be marked.
• Timer: The system presets common time durations. You can click the corresponding time duration to time quickly or click the custom button to set the time. Click the Start button to start the timing, click the pause button to pause the timing, click the reset button to reset the timing to zero.
• Alarm clock: After connecting the watch to the APP, you can set a single alarm clock, a cycle alarm clock, and up to 5 alarm clocks.
• Always-on clock: After this function is enabled, the time will be displayed on the screen-off, and the watch will increase power consumption. Please use it according to your own needs.

Q&A

1. Sleep data is not accurate enough
   1. Sleep monitoring simulates people's natural sleep and wake-up time, so it needs to be worn normally.
   2. If you wear it too late or when you fall asleep, errors may occur.
   3. Sleep data is not monitored during the daytime; the default sleep monitoring period is 21:30 to 12:00 the next day.
2. BT is not connected or cannot be connected
   1. Restart the watch and reconnect.
   2. Please try to restart the mobile phone and connect again.
   3. Do not connect the mobile phone to other BT devices at the same time. Try to connect the mobile phone again after unpairing other devices.
3. Inaccurate measurement of heart rate/blood oxygen
   1. Generally, when measuring, it is caused by poor contact between the watch sensor and wrist.
   2. Please ensure full contact between the sensor and the wrist during measurement.
   3. For people with darker skin and hairy arms, please go to the App to open [Devices - Enhanced measurement].
4. For more questions, please check the App [ME-FAQ].

Environmental Information

Maximum EIRP value: 1,47dBm

DO NOT THROW BATTERIES OR BATTERIES INTO FIRE

Note: This device is marked in accordance with the European Directive 2012/19/EC and the Polish Act on Waste Equipment electrical and electronic equipment, with the crossed-out waste bin symbol. Such marking informs that this equipment, after its useful life, cannot be placed together with other household waste. The product should be used by selective collection at the points prepared for this purpose. Proper handling of used electrical and electronic equipment contributes to avoiding consequences harmful to human health and the environment resulting from the presence of hazardous components, as well as improper storage and processing of such equipment.

The device contains a Li-ion battery. Used batteries are harmful to the environment. They should be stored in a specially designated place, in a suitable container, in accordance with applicable regulations. Batteries and accumulators must not be disposed of with waste municipal waste; take them to the collection point.

Note: The manufacturer is not responsible for any consequences caused by misuse, abuse, or non-compliance with the instructions. This manual is for informational purposes only. Some features and options described may vary by software and country. The manufacturer reserves the right to change or make changes without prior notice.

Simplified EU declaration of conformity: MAXCOM SA hereby declares that the type of radio device smartwatch FW63 is compliant with Directive 2014/53/EU, Directive 2011/65/EU (RoHS).

The full text of the EU declaration of conformity is available at the following internet address: www.maxcom.pl/pl/content/23-deklaracje

[CE marking]

[RoHS symbol]

[WEEE symbol: Crossed-out wheeled bin]

[Recycling symbol]