Sofa Assembly
Carefully unpack all components and verify that all necessary parts are included in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the order specified to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Tools Required
⚙️ [Allen Wrench]
Parts List
| No. | Picture Description | Qty | No. | Picture Description | Qty | No. | Picture Description | Qty |
|---|---|---|---|---|---|---|---|---|
| M | Sofa base frame part | 1 | E | M6x25mm Screw | 4 | H | Washer | 12 |
| N | Sofa seat/back slats | 1 | F | M6x30mm Screw | 2 | I | Nut/Cap | 12 |
| C | Left side frame | 1 | G | M6x45mm Screw | 4 | O | Connecting Bracket | 1 |
| D | Right side frame | 1 | P | M6x15mm Screw | 2 | Z | Foot/Caster | 4 |
Assembly Steps
Step 1
Attach part N (slats) to part M (back frame) using screws G (M6x45mm), washers H, and nuts/caps I. Ensure proper alignment.
Diagram Description: Shows part N being attached to part M with screws, washers, and nuts.
Step 2
Attach part N (slats) to part M (back frame) using screws P (M6x15mm), washers H, and nuts/caps I. Ensure proper alignment.
Diagram Description: Shows part N being attached to part M with different screws, washers, and nuts.
Step 3
Attach part C (left side frame) to the assembled M/N structure using screws E (M6x25mm), washers H, and nuts/caps I.
Diagram Description: Shows the left side frame (C) being attached to the main sofa structure using screws, washers, and nuts.
Step 4
Attach part D (right side frame) to the assembled M/N structure using screws E (M6x25mm), washers H, and nuts/caps I.
Diagram Description: Shows the right side frame (D) being attached to the main sofa structure using screws, washers, and nuts.
Step 5
Connect the main sofa frame (M, N, C, D) to the side pieces C and D using screws E (M6x25mm) and washers H. Ensure all bolts are tightened securely.
Diagram Description: Shows the main sofa frame being secured to the side components.
Step 6
Attach the feet Z to the base of the side frames C and D. Rotate feet Z to secure them in place.
Diagram Description: Shows feet (Z) being attached to the bottom of the sofa frame and rotated to lock.
Table Assembly
Follow these steps to assemble the coffee table.
Tools Required
⚙️ [Allen Wrench]
Parts List
| No. | Picture Description | Qty | No. | Picture Description | Qty | No. | Picture Description | Qty |
|---|---|---|---|---|---|---|---|---|
| T | Tabletop | 1 | E | M6x25mm Screw | 8 | I | Nut/Cap | 8 |
| U | Table frame | 2 | H | Washer | 8 | Z | Foot/Leg | 4 |
Assembly Steps
Step 1
Attach the tabletop T to the table frame U using screws E (M6x25mm), washers H, and nuts/caps I. Ensure proper alignment.
Diagram Description: Shows the tabletop (T) being attached to the table frame (U) with screws, washers, and nuts.
Step 2
Attach the feet Z to the base of the table frame U. Rotate feet Z to secure them in place.
Diagram Description: Shows feet (Z) being attached to the bottom of the table frame and rotated to lock.
Maintenance and Care
Protect your furniture from extreme weather conditions by moving it to a covered area. Alternatively, use furniture covers or traps for added protection.
Avoid dragging or placing heavy objects on the furniture to prevent potential damage. Regularly inspect your furniture for signs of wear, loose strands, or damage. Address any issues promptly.
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
Do not use sharp objects to scratch the painted surface. We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
Clean with a damp cloth soaked in warm soapy water or a specialized, suitable cleaning product. Conclude the cleaning process by wiping with a clean, dry cloth.
Ensure proper drying after cleaning or exposure to rain to prevent mold or mildew growth.
Avoid placing transparent glasses on the wood-plastic panel surface for long to prevent concentrating sunlight, which could lead to melting of the surface.
Warranty Information
Warranty Coverage
Our warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions
The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Contact Information
If you have any questions, concerns, or need assistance, please reach out to our customer support team using the contact information provided below:
✉️ [Email]
