Instruction Manual for royalcraft models including: FSC-ROM-80T, FSC-ROM-120T, FSC-ROM-150T, FSC-ROM-80T Series Sunray Bistro Set, FSC-ROM-80T Series, Sunray Bistro Set, Bistro Set
Roma FSC 80cm Sunray Bistro Set with 2 Roma Dining Chairs | Roseland
File Info : application/pdf, 11 Pages, 19.86MB
DocumentDocumentSUNRAY 80/120/150CM TABLE ITEM CODE: FSC-ROM-80T, FSC-ROM-120T, FSC-ROM-150T Assembly Instructions Product size: DIA80*H75 CM DIA120*H75 CM DIA150*H75 CM C015992 The Diagrams only represent 150cm Table, the assembly steps are the same for 80cm and 120cm Table. Furniture should be covered/stored whilst not in use to prolong its longevity. (It should also be covered in adverse weather.) This product is for domestic use only. IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE READ CAREFULLY © A. Mir & Co., Ltd. www.royalcraft.co.uk 1 / 4 SUNRAY 80/120/150CM TABLE ITEM CODE: FSC-ROM-80T, FSC-ROM-120T, FSC-ROM-150T Before you start Warnings Clean your product with a sponge and warm soapy water then wipe with a clean, dry cloth. IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY See enclosed instructions for assembly, safety and care information. Failure to follow the warnings could result in serious injury. Handle heavy parts with care. Ensure that this product is fully assembled as illustrated before use. This product should only be used on firm, level ground. The product contains small parts which could pose a risk to young children. Keep small parts out of reach of children. Do not stand or climb onto this product. This product is intended for domestic use only. Ensure the product is always placed on level ground. Furniture can be dangerous if incorrectly used. No liability will be accepted for damage or injury caused by incorrect use of this product. Take care when opening and folding furniture. Keep your hands away from moving parts in order to prevent trapping your fingers. Children should not open or close the furniture. Dos Ensure that the product is clean and dry before storage. Where instructions as to the; storage, commissioning, installation, use and maintenance of the goods or (if there is none) good trade practice are not followed and a defect arises this will void the 12 month manufacturer's guarantee on the product. Don'ts Do not use scourers, abrasives, washing powders, chemical cleaners or any other substances containing abrasives since these substances can damage the product. To preserve the product do not place greasy / oily items directly onto the wooden surface. Do not place very hot or very cold items on the wooden surface unless adequately thick place-mats are used to prevent such items from coming into contact with the wood. Do not strike the product with hard or pointed items. Do not sit or lean on the arms of this product. Do not use power tools to construct this product. Do not tighten screws until fully assembled. Do not overtighten screws or bolts. Do not use this product if parts are missing, damaged or worn. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on suitable surface to prevent scratching your product. Check the pack and make sure you have all of the parts listed. In the event of problems or missing parts, please contact the seller. Check all screws and bolts are tightened and inspect regularly. During severe weather conditions, including high winds, rain, hail, thunderstorms, extreme heat and cold temperatures, the product should be stored inside in a cool, dry place. Do not place furniture near the outdoor exhaust vents. Do not write on furniture without a padded barrier to protect the surface. Do not stand or climb onto the product and do not use it as a ladder, as this could lead to it unbalancing and overturning. Never tilt the product during use. Never drag furniture when moving it, always lift it. This table is not intended to support a parasol separately. A parasol base with suitable weight must be used to support your parasol. To best preserve this product, please use a protective cover when your furniture is not in use. We would also recommend using a gazebo or parasol over your furniture during the summer period and prolonged sunny spells. This will help prevent harmful UV rays from damaging and discolouring the material. Number of people required for assembly Two people Timber is a natural product and contains coloured resins which may initially bleed out of the timber when its gets wet. Therefore we recommend that care is taken to protect patios and decking from possible staining where the product comes into contact with the ground. The furniture will stabilise in its environment after the first few times it gets wet. Wood is a natural material whose appearance will deteriorate when left outside. This product has been treated with a PU surface coating to protect it from premature darkening, or splitting, when exposed to the weather. Scuffs to the finish should be maintained regularly using the touch up liquid provided to ensure that the furniture continues to look at its best, light sanding in the affected area only may be required before use of the touch up liquid. Should you choose not to treat your furniture, then colour distortions and cracks may develop over time. Time to assemble µ µµ µµµ µµµ µµµ 30 minutes Tools required www.royalcraft.co.uk © A. Mir & Co., Ltd. 2 / 4 SUNRAY 80/120/150CM TABLE ITEM CODE: FSC-ROM-80T, FSC-ROM-120T, FSC-ROM-150T Components, fixtures & fittings (not actual size) Parts List Part No. Diagram Qty. Part No. Diagram Qty. A 1 PC B 4 PCS Table Top Leg B70 Bolt M8*70mm 8 PCS SW 8 PCS Spring Washer FW 8 PCS AK Flat Washer Allen Key Step by step assembly instructions 1 PC © A. Mir & Co., Ltd. www.royalcraft.co.uk 3 / 4 Special Maintenance Instructions for Wooden Products Warning! KEEP OUT OF THE REACH OF CHILDREN The Bottle of Lacquer PU should be kept out of the reach of children. Maintenance Tools: 1. Soft Cloth/Wipe: Not provided 2. 20ml Bottle of Lacquer PU Light Teak Colour: Provided 3. Small Brush: Provided Maintenance Steps: 1. Clean the surface with a clean cloth/Wipe 2. Gently evenly brush over scratched areas; 3. With a cloth gently rub in the lacquer; 4. Allow lacquer to dry for 3 hours. IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE READ CAREFULLY © A. Mir & Co., Ltd. ROMA DINING CHAIR ITEM CODE: FSC-ROM-DIN Assembly Instructions Product size: W55*D66*H75 CM 2 PCS C015992 Furniture should be covered/stored whilst not in use to prolong its longevity. (It should also be covered in adverse weather.) This product is for domestic use only. IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE READ CAREFULLY © A. Mir & Co., Ltd. www.royalcraft.co.uk 1 / 5 ROMA DINING CHAIR ITEM CODE: FSC-ROM-DIN Before you start Warnings Clean your product with a sponge and warm soapy water then wipe with a clean, dry cloth. IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY See enclosed instructions for assembly, safety and care information. Failure to follow the warnings could result in serious injury. Handle heavy parts with care. Ensure that this product is fully assembled as illustrated before use. This product should only be used on firm, level ground. The product contains small parts which could pose a risk to young children. Keep small parts out of reach of children. Do not stand or climb onto this product. This product is intended for domestic use only. Ensure the product is always placed on level ground. Furniture can be dangerous if incorrectly used. No liability will be accepted for damage or injury caused by incorrect use of this product. Take care when opening and folding furniture. Keep your hands away from moving parts in order to prevent trapping your fingers. Children should not open or close the furniture. Ensure that the product is clean and dry before storage. Where instructions as to the; storage, commissioning, installation, use and maintenance of the goods or (if there is none) good trade practice are not followed and a defect arises this will void the 12 month manufacturer's guarantee on the product. Don'ts Do not use scourers, abrasives, washing powders, chemical cleaners or any other substances containing abrasives since these substances can damage the product. To preserve the product do not place greasy / oily items directly onto the wooden surface. Do not place very hot or very cold items on the wooden surface unless adequately thick place-mats are used to prevent such items from coming into contact with the wood. Do not strike the product with hard or pointed items. Do not sit or lean on the arms of this product. Do not use power tools to construct this product. Do not tighten screws until fully assembled. Do not overtighten screws or bolts. Dos When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly. Unwrap all packaging materials and place the components on suitable surface to prevent scratching your product. Check the pack and make sure you have all of the parts listed. In the event of problems or missing parts, please contact the seller. Check all screws and bolts are tightened and inspect regularly. During severe weather conditions, including high winds, rain, hail, thunderstorms, extreme heat and cold temperatures, the product should be stored inside in a cool, dry place. To best preserve this product, please use a protective cover when your furniture is not in use. We would also recommend using a gazebo or parasol over your furniture during the summer period and prolonged sunny spells. This will help prevent harmful UV rays from damaging and discolouring the material. Do not use this product if parts are missing, damaged or worn. Do not place furniture near the outdoor exhaust vents. Do not write on furniture without a padded barrier to protect the surface. Do not stand or climb onto the product and do not use it as a ladder, as this could lead to it unbalancing and overturning. Never tilt the product during use. Never drag furniture when moving it, always lift it. The One-Seater product is intended for max use 120 kgs, Two-Seater product is intended for max use 200 kgs, Three-Seater product is intended for max use 250 kgs, do not exceed this weight. Number of people required for assembly Two people Timber is a natural product and contains coloured resins which may initially bleed out of the timber when its gets wet. Therefore we recommend that care is taken to protect patios and decking from possible staining where the product comes into contact with the ground. The furniture will stabilise in its environment after the first few times it gets wet. Time to assemble µ µµ Tools required µµµ µµµ Wood is a natural material whose appearance will deteriorate when left outside. This product has been treated with a PU surface coating to protect it from premature darkening, or splitting, when exposed to the weather. Scuffs to the finish should be maintained regularly using the touch up liquid provided to ensure that the furniture continues to look at its best, light sanding in the affected area only may be required before use of the touch up liquid. Should you choose not to treat your furniture, then colour distortions and cracks may develop over time. µµµ 30 minutes © A. Mir & Co., Ltd. www.royalcraft.co.uk 2 / 5 ROMA DINING CHAIR ITEM CODE: FSC-ROM-DIN Components, fixtures & fittings (not actual size) Parts List Part No. Diagram Qty. Part No. Diagram Qty. A 2 PCS B Backrest 2 PCS Seat C 2 PCS D 2 PCS Right Leg/Armrest Left Leg/Armrest F 2 PCS G Backrest Cushion Seat Cushion 2 PCS ST70 Self-Taping Screw M6*70mm 4 PCS ST50 Self-Taping Screw M6*50mm 6 PCS B30 Bolt M6*30mm 12 PCS N2 12 PCS Nut mm 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 © A. Mir & Co., Ltd. www.royalcraft.co.uk 3 / 5 ROMA DINING CHAIR ITEM CODE: FSC-ROM-DIN AK 2 PCS Z1 24 PCS Allen Key Bolt Head Cap (16PCS+ 8PCS Extra) Step by step assembly instructions Step One With the help of another person, attach the Backrest (A), Right Leg/Armrest (C), Left Leg/Armrest (D) and Seat (B) together using Self-Taping Screws (ST70) and (ST50). Please note the locations for the Self-Taping Screws (ST70) and (ST50). ST70 is used for the Seat Front Part. ST50 is used for the Seat Rear Part. B ST50 BD ST70 ST70 C © A. Mir & Co., Ltd. www.royalcraft.co.uk 4 / 5 Special Maintenance Instructions for Wooden Products Warning! KEEP OUT OF THE REACH OF CHILDREN The Bottle of Lacquer PU should be kept out of the reach of children. Maintenance Tools: 1. Soft Cloth/Wipe: Not provided 2. 20ml Bottle of Lacquer PU Light Teak Colour: Provided 3. Small Brush: Provided Maintenance Steps: 1. Clean the surface with a clean cloth/Wipe 2. Gently evenly brush over scratched areas; 3. With a cloth gently rub in the lacquer; 4. Allow lacquer to dry for 3 hours. IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE READ CAREFULLY © A. Mir & Co., Ltd.