[list] ASSEMBLY INSTRUCTIONS
Carefully unpack all components and verify that all necessary parts are included in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the order specified to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Parts List
| NO. | PICTURE | QTY | NO. | PICTURE | QTY |
|---|---|---|---|---|---|
| A | Slatted tabletop | 1 | D | Washer (dia13 x dia8 x 2.0mm) | 8 |
| B | Table leg | 4 | E | Washer (dia14 x dia9 x 1.0mm) | 8 |
| C | Bolt (M8x40mm) | 8 | F | Wrench | 1 |
[list] PRODUCT ASSEMBLY
Step 1
Attach the four legs (Part B) to the underside of the tabletop (Part A). Use two bolts (Part C) and two washers (Part D and Part E) for each leg. Insert the bolts through the designated holes in the leg and into the frame of the tabletop. Secure with washers and tighten using the provided wrench (Part F).
Step 2
The table is now fully assembled. Ensure all connections are secure before use.
[tools] MAINTENANCE AND CARE
Protect from extreme weather by moving furniture to a covered area or using furniture covers or tarps.
Avoid dragging or placing heavy objects on the furniture to prevent damage.
Do not use sharp objects to scratch the painted surface.
Dust often using a clean, soft, dry, and lint-free cloth.
Chemical cleansers, abrasives, or furniture polish are not recommended for the lacquered finish.
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
Do not put hot objects on the table itself, as they can cause permanent marks (discoloration, deformation, cracks). Always use table mats.
Do not use a plastic tablecloth on the table. Exposed to UV and heat, it could melt and act as a decal, especially on steel, aluminum, and glass. Instead, use a fabric tablecloth.
[warranty] WARRANTY INFORMATION
Warranty Coverage
The warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions
The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
[email] Contact Information
If you have any questions, concerns, or need assistance, please reach out to the customer support team using the contact information provided below:
