Assembly Instructions
Carefully unpack all components and verify that all the necessary parts are included as listed in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the order specified to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Parts List
| NO. | PICTURE | QTY | NO. | PICTURE | QTY |
|---|---|---|---|---|---|
| A | Tabletop (a large, flat rectangular surface) | 1 | C | Screws (fasteners with threaded shafts) | 8 |
| B | Legs (four vertical supports for the table) | 4 | D | Washers (flat rings placed under screw heads) | 8 |
| E | Bracket (a metal plate with holes for securing parts) | 1 |
Product Assembly Steps
Step 1
Attach the legs (B) to the underside of the tabletop (A) using brackets (E), screws (C), and washers (D). The diagram shows screws and washers passing through the bracket and into the leg and tabletop assembly.
Step 2
Extend the table by sliding the tabletop halves apart. The extension mechanism is shown in an unlocked state, allowing movement.
Step 3
Insert extension leaves into the central gap created by extending the tabletop.
Step 4
Secure the extended table by locking the extension mechanism, shown in a locked state.
Maintenance and Care
Do not place hot objects directly on the table surface, as this can cause permanent marks, discoloration, deformation, or cracks. Always use table mats.
Avoid using plastic tablecloths, as exposure to UV rays and heat can cause them to melt and act as a decal, especially on surfaces like steel, aluminum, and glass. Fabric tablecloths are recommended instead.
Assembly parts may loosen over time. Periodically check and tighten them as needed.
This outdoor furniture is designed for normal outdoor weather conditions. However, severe climatic hazards or exceptional weather may affect its appearance, correct use, and lifespan. The product is subject to external elements and requires regular cleaning.
Clean the table with a damp cloth soaked in warm, soapy water or a specific, adapted cleaning product. Finish by wiping with a clean, dry cloth.
Warranty Information
Warranty Coverage: Royalcraft provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions: The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Contact Information
If you have any questions, concerns, or need assistance, please reach out to the customer support team using the contact information provided below:
✉️ Customer Support Email: support@royalcraft.store
