ZDN003 Instruction Manual
Assembly Instructions
Carefully unpack all the components and verify that all the necessary parts are included as listed in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the order specified to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Parts List
| NO. | PICTURE | QTY | NO. | PICTURE | QTY |
|---|---|---|---|---|---|
| A | Slatted tabletop | 1 | D | Washer (dia13xdia8x2.0mm) | 8 |
| B | Table leg | 4 | E | Washer (dia14xdia9x1.0mm) | 8 |
| C | Bolt (M8x40mm) | 8 | F | Wrench ? | 1 |
Product Assembly
Step 1
Attach the legs (B) to the underside of the tabletop (A) using bolts (C) and washers (D, E). Ensure all connections are secure.
Step 2
The table is now fully assembled.
Maintenance and Care
Protect from extreme weather by moving furniture to a covered area or using furniture covers or traps. Avoid dragging or placing heavy objects on the furniture to prevent damage. Do not use sharp objects to scratch the painted surface. Dust often using a clean, soft, dry, and lint-free cloth. Chemical cleansers, abrasives, or furniture polish are not recommended for the lacquered finish. Hardware may loosen over time; periodically check and re-tighten connections if necessary. Do not dispose of packaging until assembly is completed to avoid discarding small parts. Do not place hot objects directly on the table; use table mats to prevent permanent marks (discoloration, deformation, cracks). Avoid plastic tablecloths, as they can melt and act as a decal when exposed to UV and heat; use fabric tablecloths instead.
Warranty Information
Warranty Coverage
The warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions
The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Contact Information
If you have any questions, concerns, or need assistance, please reach out to the customer support team using the contact information provided below:
✉️ Customer Support Email: support@royalcraft.store
