JLab JBuds Frames

We are proud of our products and dedicate all our efforts to supporting them.

Register Today

Get usage tips, product updates, and access FAQs and more by registering your product.

intl.jlab.com/register

Your Warranty

All warranty claims are subject to JLab approval, at our sole discretion. Keep your proof of purchase for the product to ensure warranty benefits.

Contact Us

Email us at support@jlab.com

Visit our website at intl.jlab.com/contact

Assembly

Identify the right and left sides by looking at the back of the glasses arms. If necessary, add the two rubber pieces to the clips to tighten the glasses arms.

[Diagram: Shows a pair of glasses frames. Labels 'L' and 'R' are visible on the back of the arms. Small rubber pieces are shown separately, indicating they attach to the clips on the arms.]

Thin frames: Outer face of the lens

Very thin frames: Outer face of the icon

Attaching JBuds Frames

Place JBuds Frames on the right and left arms of the glasses.

[Diagram: Shows glasses with the JBuds Frames attached to the arms near the temples.]

JBuds Frames should be placed near the ears for best performance.

Bluetooth Pairing

Press and hold both buttons for 5 seconds. One side will start flashing blue/white ?⚪️, indicating it is ready to connect.

[Diagram: Shows a smartphone with Bluetooth settings open, displaying "JLab JBuds Frames" as a connected device. Also shows the JBuds Frames with indicator lights.]

Go to your device settings ⚙️ and connect to "JLab JBuds Frames". When solid white lights ⚪️ appear, it means connection is established ✔️.

Button Functions

[Diagram: Shows the arms of the glasses with the JBuds Frames. Labels point to the 'Left Button' and 'Right Button'. Indicator lights are also shown.]

Right Button Functions:

Volume Up: Single press
Play/Pause: Double press ▶️/⏸️
Forward Tracks: Press and hold for 1+ second ⏩
Answer Calls: Single press
End Call: Double press
Reject Incoming Calls: Press and hold for 1+ second
Use with voice assistants: OK Google Android or Siri (iOS) Single press
Next Tracks: Double press
Rewind Tracks: Press and hold for 1+ second ⏪

Left Button Functions:

Volume Down: Single press
Use with voice assistants: OK Google Android or Siri (iOS) Single press
Rewind Tracks: Press and hold for 1+ second ⏪

Audio Notifications

Power On: Rhythmic chime
Bluetooth Connection: Two chimes
Low Battery: "Battery low" (less than 20%)
Power Off: Rhythmic chime

EQ Settings

Press the left or right earbud three times to cycle through the different EQ settings (JLab Signature Sound / Bass Boost / Voice Boost).

[Diagram: Shows the earbuds with indicator lights. Text labels describe the different EQ modes.]

JLab Signature Sound: One chime
Bass Boost: Three chimes
Voice Boost: Enhanced bass

Charging

Connect JBuds Frames to a computer or USB device that provides 5V 1A (or less) power.

[Diagram: Shows the JBuds Frames charging case connected via a USB cable to a power source (like a computer or wall adapter). The case has indicator lights.]

Quick Tips

Place JBuds Frames as close to your ears as possible. This will enhance your listening experience and the performance of the earbuds.

You can use either the right or left JBuds Frames independently, or use both by pairing them for music or phone calls. Please note that you can only use one side, either the right or left, if you are using only one.

[Diagram: Shows a person wearing glasses with JBuds Frames. Another diagram shows a smartphone with Bluetooth settings.]

Troubleshooting

No sound in one earbud, or Bluetooth not connecting/reconnecting (Manual Reset)

Go to your device's Bluetooth settings ⚙️ and tap "Forget JLab JBuds Frames".
[Diagram: Shows a smartphone screen with Bluetooth settings, highlighting the option to "Forget Device" for "JLab JBuds Frames".]
After turning off JBuds Frames, press and hold both buttons for 15+ seconds. The Frames will then turn on and then turn off.
[Diagram: Illustrates pressing and holding buttons on the JBuds Frames for an extended period (15+ seconds).]
Press and hold both buttons for 3 seconds to turn on. One side will start flashing blue/white ?⚪️, indicating it is ready to connect. Go to your device settings ⚙️ and reconnect.
[Diagram: Shows the JBuds Frames flashing blue/white lights, indicating pairing mode, and a smartphone connecting via Bluetooth.]

Educational videos are available at intl.jlab.com/manuals.

Warnings

Avoid exposing the earbuds or charging port to moisture or liquids.
Avoid exposing the earbuds to extreme heat, cold, or humidity.
Avoid dropping, crushing, or excessively bending the earbuds or cable. Avoid sharp bends in the cable.
Earwax may accumulate on the earbud tips, leading to reduced sound quality. Clean the earwax carefully using a cotton swab or other fine tools to improve sound quality.
If you experience any pain, try reducing the volume or taking a break from using the earbuds.
If pain persists while using this product, discontinue use and consult a doctor.
We recommend treating your earbuds like your glasses; keep them in a safe place when not in use.

	JLab JBuds Frames User Manual: Setup, Bluetooth, and Troubleshooting Comprehensive guide to setting up, connecting via Bluetooth, using features, and troubleshooting the JLab JBuds Frames audio eyewear.
	JLab JBuds Frames User Manual: Assembly, Bluetooth, and Operation Guide Comprehensive guide to JLab JBuds Frames, covering assembly, Bluetooth connection, button functions, charging, troubleshooting, and important cautions. Learn how to use your audio eyewear for music and calls.
	JLab JBuds Frames User Manual and Guide Comprehensive guide to setting up, connecting, and using your JLab JBuds Frames audio glasses, including assembly, Bluetooth pairing, button functions, EQ settings, charging, and troubleshooting.
	JLab JBuds Frames: User Manual and Guide Comprehensive guide to JLab JBuds Frames, covering assembly, Bluetooth pairing, button functions, EQ settings, charging, troubleshooting, and safety precautions. Learn how to attach, connect, and use your JLab JBuds Frames for an enhanced audio experience.
	JLab JBuds Frames User Manual and Guide Comprehensive guide to setting up, using, and troubleshooting your JLab JBuds Frames audio glasses, including assembly, Bluetooth pairing, button functions, and safety information.
	JLab JBuds Frames User Manual and Quick Start Guide Comprehensive guide to setting up, connecting, and using JLab JBuds Frames audio glasses, including mounting instructions, Bluetooth pairing, button functions, EQ settings, charging, troubleshooting, and important precautions.
	JLab JBuds Frames User Manual and Guide Comprehensive guide to setting up, connecting, and using JLab JBuds Frames wireless audio glasses. Includes button functions, charging instructions, troubleshooting steps, and important safety warnings.
	JLab JBuds Frames: Wireless Earbuds for Sunglasses - User Guide Learn how to assemble, pair, and use your JLab JBuds Frames wireless earbuds. This guide provides instructions on button functions, charging, troubleshooting, and important warnings for optimal use.