JLab JBuds Frames User Manual
We're glad you love JLab! We stand proudly behind our products.
Warranty & Support
YOUR WARRANTY: All warranty claims are subject to JLab manufacturer approval and our discretion. Keep your proof of purchase to ensure warranty coverage.
CONTACT US: Reach us at support@jlab.com or visit intl.jlab.com/contact
REGISTER TODAY: intl.jlab.com/register
Get product updates, tips for use, and FAQs.
Assembly
-
Locate the 'L' and 'R' indicators on the back of the glasses arms. If needed, add the rubber ear tips to narrow glasses arms.
Description: Shows glasses arms with 'L' and 'R' markings. Text indicates 'Rubber ear tips' can be added. For thin frames, the icon faces outward. For very thin frames, the logo faces outward.
-
Slide the JBuds Frames onto the corresponding left and right glasses arms.
Description: Shows JBuds Frames being slid onto glasses arms. Text states: 'JBuds Frames should be positioned as close to your ears as possible for better performance.'
Bluetooth Connection
-
Press and hold the button for 5+ seconds. One side will begin flashing blue/white light, indicating it's ready to pair.
-
Go to your device's settings and connect to 'JLab JBuds Frames'. A solid white light will indicate connection.
Description: Screenshot of phone settings showing Bluetooth menu with 'JLab JBuds Frames' connected and a solid white light indicator.
Adding New/Additional Bluetooth Devices:
Turn off Bluetooth on all previously connected devices. Turn on Bluetooth on the new device. Turn on the JBuds Frames, and the devices will begin the pairing process after 10 seconds. Select 'JLab JBuds Frames' in your new device's settings to connect.
Button Functions
Description: Shows the left and right earbuds attached to glasses arms. Labels point to 'Indicator Light' and 'Left Button'/'Right Button'.
Voice Prompts:
- POWER ON = Ring
- BLUETOOTH CONNECTED = 2 beeps
- LOW BATTERY = 'Low battery' (below 20%)
- POWER OFF = Ring
Left Button Functions:
- VOLUME DOWN: Press once
- SIRI (iOS) or 'OK GOOGLE' (ANDROID): Press twice
- PREVIOUS TRACK: Press and hold 1+ sec.
Right Button Functions:
- VOLUME UP: Press once
- PLAY / PAUSE: Press twice
- NEXT TRACK: Press and hold 1+ sec.
- ANSWER CALL: Press once
- END CALL: Press twice
- REJECT INCOMING CALL: Press and hold 1+ sec.
Changing EQ Settings:
Press three times on either earbud (Cycles JLab Signature/Bass Boost)
Powering On / Off:
Press and hold for 3+ seconds on either earbud (button will power off both sides)
EQ Settings
Triple-press the right or left earbud to cycle through different EQ settings.
- JLab SIGNATURE (One Beep): JLab C3™™ signature sound with enhanced vocals and bass
- BASS BOOST (Three Beeps): Enhanced bass and sub-bass
Charging
Connect the JBuds Frames to a computer or USB power adapter (5V 1A or less).
Description: Shows JBuds Frames connected via USB cable to a computer or wall adapter.
Quick Tips
- Position the JBuds Frames as close to your ears as possible. This will significantly improve audio performance.
- You can use the JBuds Frames individually or together with Dual Connect for listening to music or taking calls. Remember you only have access to left or right controls if using a single earbud.
Description: Shows one earbud connected to a phone, and then both earbuds connected to a phone, illustrating individual or dual use.
Troubleshooting
No Sound on One Side or Cannot Establish/Re-establish Bluetooth Connection (Manual Reset)
-
Go to your device's Bluetooth settings and 'Forget' the JLab JBuds Frames.
Description: Screenshot of phone settings showing Bluetooth menu, with 'JLab JBuds Frames' selected and an info icon next to it, implying the 'forget' option.
-
With the JBuds Frames powered off, press and hold both buttons for 15+ seconds. The Frames will power on, then power off.
Description: Shows fingers pressing and holding both buttons on the earbuds for over 15 seconds.
-
Press and hold both buttons for 3+ seconds to power on the earbuds. The JBuds Frames will begin flashing blue/white light, indicating pairing readiness. Go to your device's settings and reconnect.
Description: Shows fingers pressing and holding both buttons for 3+ seconds, with flashing lights indicated. Then, a phone settings screen showing reconnection.
Caution
- Avoid extreme heat, cold, and moisture.
- Avoid dropping or crushing the earbuds.
- Earwax may accumulate on the ear tips, reducing sound quality. Carefully clean earwax with a cotton swab or other small tool to restore sound quality.
- If you experience discomfort or pain, try lowering the volume or temporarily stop using the earbuds.
- If you experience persistent discomfort while using this product, discontinue use and consult a physician.
