Minelab Manticore Metal Detector Getting Started Guide

This guide provides essential information for setting up and beginning to use your Minelab Manticore metal detector.

For comprehensive details, including the full User Manual, technical specifications, software updates, and learning resources, scan the QR code or visit: www.minelab.com/manticore

To check product compliance information: Navigate to Settings > General Settings > Compliance.

Available Languages: English (EN), French (FR), Portuguese (PT), German (DE), Japanese (JP), Russian (RU), Spanish (ES), Korean (KO), Chinese (ZH).

Search Modes

The Manticore offers several search modes tailored for different environments and targets:

Gold: [gold-nugget-icon] Ideal for gold prospecting in mineralized ground.
General: [target-icon] For general detecting use.
All-Terrain: [park-bench-icon] Suitable for parks, fields, and beaches with a lot of trash.
Beach: [wave-icon] For dry sand, wet sand, surf, and underwater. Ideal for any high salinity ground conditions.

Not sure which mode to use? Start with 'General' or 'All-Terrain' for most situations.

Quick Start Guide

Follow these four simple steps to begin detecting:

Step 1: Turn On [power-button-icon] Press the power button to turn on the detector.
Step 2: Noise Cancel [signal-wave-icon] Perform noise cancellation to adapt to electromagnetic interference.
Step 3: Search Mode [magnifying-glass-icon] Select your desired search mode based on your detecting environment.
Step 4: Start Detecting [flag-icon] Begin your search!

Assembly

Assemble your Minelab Manticore detector:

[detector-parts-diagram]

Connect the coil to the lower shaft.
Connect the middle shaft to the lower shaft.
Connect the control box to the middle shaft.
Secure all connections using the cam locks.
Adjust the shaft length to a comfortable position.
Ensure all cam locks are tightened securely. If cam locks slip or loosen, tighten them. Check, and repeat if necessary.

Charging

Your Manticore detector requires charging before first use.

[usb-ports-diagram]

Charging Time: Approximately 7 to 8 hours for a full charge.

Important: Always use a quality USB charger with a charging specification of no less than 2A/5V to charge the detector. Using a low-quality USB charger may cause USB charging failure.

USB chargers should have the following certification marks: [ce-mark] [eac-mark] [intertek-mark]

Important: Only charge the detector within an ambient temperature range of 0°C to +40°C.

The charging status is indicated by an LED light.

Controls and Display Interface

Familiarize yourself with the detector's controls and display:

Settings Menu

Access the settings menu by pressing the button on the detection screen.

Display Elements

Charging Status LED: [led-indicator] Indicates battery charging status.
Large Target Overload: [warning-icon] Appears when a very large target is detected.
Search Mode: [mode-icon] Displays the currently active search mode.
Frequency: [frequency-icon] Shows the operating frequency.
Volume: [volume-icon] Adjusts the audio volume.
Sensitivity Level: [sensitivity-icon] Displays the current sensitivity setting.
Backlight/Flashlight: [light-icon] Controls screen brightness and flashlight.
Wireless Audio On/Off: [wireless-icon] Manages wireless headphone connection.
Target ID Number: [id-number-display] Shows the numerical identification of a detected target.
Conductive Object ID: [conductive-id-display] Displays the conductivity value of a target.
Conductive Object ID with Ferrous Target Indicator: [conductive-id-ferrous-indicator] Shows conductivity and indicates if the target is ferrous.
Salt Indicator (Beach Mode only): [salt-icon] Displays ground mineralization level in Beach mode.
Target Depth Indicator: [depth-icon] Estimates the depth of the detected target.
Target ID Graph: [graph-icon] Visual representation of target conductivity and ferrous properties.
Ferrous Limit: [ferrous-limit-indicator] Threshold for identifying ferrous targets.
Target Trace: [trace-icon] Shows the target's location and shape (e.g., nail, coin).

Control Buttons

Power Button: [power-icon] Turns the detector on/off.
Back Button: [back-arrow-icon] Returns to the previous screen or menu.
Pinpoint Button: [pinpoint-icon] Activates the pinpoint mode for precise target location.
Operation Bar Soft Keys (x2): [soft-key-icon] These keys change function depending on the setting or current screen.
Sensitivity Adjustment: Use the Left/Right arrow buttons (◀/▶) on the detection screen to adjust sensitivity.
Pinpoint Mode Activation: Press the Pinpoint button to select pinpoint mode.
Navigation Arrows (x4): [navigation-arrow-icon] Used for menu navigation and adjustments.
Side Soft Keys (x2): [side-soft-key-icon] Additional function buttons.

	Minelab Manticore Metal Detector: Quick Start Guide & Assembly Get started with your Minelab Manticore metal detector. This guide covers assembly, charging, control panel overview, and basic operation for efficient metal detecting.
	Minelab Manticore Metal Detector: Getting Started Guide A concise, SEO-optimized guide to setting up and using the Minelab Manticore metal detector. Covers assembly, charging, controls, display, and initial search modes for efficient metal detecting.
	Minelab Manticore Metal Detector Quick Start Guide Get started quickly with the Minelab Manticore metal detector. Learn about search modes, assembly, charging, and controls for efficient metal detecting.
	Minelab PRO-FIND 40 Pinpointer: Getting Started Guide A concise guide to operating the Minelab PRO-FIND 40 pinpointer metal detector, covering parts, maintenance, and basic functions like turning on/off, adjusting sensitivity, and factory reset.
	Minelab Manticore Metal Detector Quick Start Guide Get started quickly with the Minelab Manticore metal detector. This guide covers assembly, basic operation, search modes, and controls for efficient metal detecting.
	Minelab Excalibur II Metal Detector Getting Started Guide Quick start guide for the Minelab Excalibur II metal detector, covering assembly, quick start modes (Discriminate, Pinpoint/All Metals), controls, and battery information.
	Minelab X-TERRA PRO Metal Detector Quick Start Guide A concise guide to setting up and operating the Minelab X-TERRA PRO metal detector, covering assembly, controls, search modes, and basic operation.
	Minelab X-TERRA ELITE Metal Detector: Quick Start Guide A concise guide to setting up and starting your Minelab X-TERRA ELITE metal detector, covering quick start, search modes, assembly, charging, and control interface. This document is optimized for search engines and accessibility.