Minelab Excalibur II Metal Detector Getting Started Guide

Brand: Minelab

Model: Excalibur II

Model Number: 4901-0382-1

Assembly

  1. Attach the armrest to the upper shaft. [assembly diagram]
  2. Connect the control housing to the upper shaft. [assembly diagram]
  3. Connect the battery to the upper shaft. [assembly diagram]
  4. Attach the lower shaft to the coil. [assembly diagram]
  5. Attach the upper shaft to the lower shaft. [assembly diagram]
  6. Wrap the coil cable. [assembly diagram]

For more information, visit minelab.com. Translations of this Getting Started Guide and the full User Manual are available for download online.

Quick Start

Discriminate Mode

For detecting non-ferrous metals.

  1. Set the switch to Disc (Discriminate) mode. [Discriminate mode switch]
  2. Turn on the detector by turning the Threshold control clockwise until it clicks. Continue turning until the audio tone is heard. [Turn Threshold knob clockwise]
  3. Adjust the Discrimination control to the desired position. [Adjust Discrimination knob]
  4. Set the Sensitivity Control to Auto or the maximum manual setting without electrical interference. [Adjust Sensitivity knob]
  5. Start detecting. [Begin detection]

Pinpoint / All Metals Mode

For detecting all types of metals.

  1. Set the switch to Pinpoint / All Metals mode. [Pinpoint/All Metals switch]
  2. Turn on the detector by turning the Threshold control clockwise until it clicks. Continue turning until the audio tone is heard. [Turn Threshold knob clockwise]
  3. Set the Sensitivity Control to Auto or the maximum manual setting without electrical interference. [Adjust Sensitivity knob]
  4. Start detecting. [Begin detection]

Controls

English

  • Discriminate
  • Sub-Aqua
  • Auto
  • Sensitivity
  • Volume
  • Off
  • Threshold
  • Discriminate
  • Pinpoint / All Metals

Español

  • Discriminación
  • Bajo el agua
  • Automático
  • Sensibilidad
  • Volumen
  • Apagado
  • Nivel del Umbral
  • Discriminación
  • Localizar / Todos los metales

Italiano

  • Discriminazione
  • Subacqueo
  • Auto
  • Sensibilità
  • Volume
  • Spento
  • Livello Soglia Audio
  • Discriminazione
  • Localizzazione / Tutti i Metalli

Français

  • Discrimination
  • Sous-marin
  • Auto
  • Sensibilité
  • Volume
  • Désactivé
  • Niveau Seuil
  • Discrimination
  • Centrage / Tous Métaux

中文 (Chinese)

  • 识别
  • 水下
  • 自动
  • 灵敏度
  • 音量
  • 关闭
  • 阈值
  • 识别
  • 精确定位/所有金属

Русский (Russian)

  • дискриминатор
  • Подводный
  • Авто
  • Чувствительность
  • Громкость
  • Выкл
  • Порог. тон
  • дискриминатор
  • Центр цели / поиском всех металлов

Battery

Low Battery Alarm

When the battery level is very low, the Threshold tone will gradually increase to a strong continuous signal. [Low battery warning tone]

Charging

The Excalibur II is supplied with an adapter plug and a wall socket charger. The charger will charge the batteries from local mains sockets (AC).

[Diagram: Battery pack connected to charger plugged into AC outlet]

PDF preview unavailable. Download the PDF instead.

4901-0382-1 GSG, Excalibur II ES WEB Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)

Related Documents

Preview Minelab Excalibur II Metal Detector: Getting Started Guide
A concise guide to assembling and operating the Minelab Excalibur II metal detector, including quick start instructions for discriminate and all metals modes, control descriptions, and battery charging information.
Preview Minelab Excalibur II Metal Detector Instruction Manual
Comprehensive user manual for the Minelab Excalibur II metal detector, covering setup, operation, features, maintenance, and troubleshooting.
Preview Minelab X-TERRA PRO Metal Detector: Quick Start Guide & Features
Quick start guide for the Minelab X-TERRA PRO metal detector. Learn about its features, assembly, recharge process, and how to use the different search modes (Park, Field, Beach) and controls for effective metal detecting.
Preview Minelab X-TERRA PRO Metal Detector Quick Start Guide
Get started quickly with the Minelab X-TERRA PRO metal detector. This guide covers assembly, charging, basic operation, and interface controls for efficient metal detecting.
Preview Minelab Manticore Metal Detector: Quick Start Guide & Assembly
Get started with your Minelab Manticore metal detector. This guide covers assembly, charging, control panel overview, and basic operation for efficient metal detecting.
Preview Minelab F3Ci Mine Detector Field Guide: Assembly and Operation
Concise field guide for the Minelab F3Ci Mine Detector, covering assembly, unfolding, operation modes (Detection, Interrogation, Pinpoint), and packing instructions.
Preview Minelab F3Ci Mine Detector Field Guide
Concise field guide for the Minelab F3Ci Mine Detector, covering assembly, operation modes, and packing instructions with detailed textual descriptions of all visual content.
Preview Minelab Excalibur II Metal Detector: Introductory Guide and Assembly Instructions
Get started with your Minelab Excalibur II metal detector. This guide covers assembly, quick start operations for discrimination and all-metal modes, control descriptions, and battery information.