Televes PicoKom 24V 130mA, 2 Outputs
Product Description
The Televes PicoKom 24V 130mA is an indoor power supply that delivers 24V (130mA) through the coaxial cable. It allows for the passage of the TV signal and is used to power outdoor amplifiers or BOSS systems. This unit also incorporates a splitter to generate two outputs.
Article Number: 5795
Logical Article: PSU242PICO
EAN13: 8424450140925
Packaging Information
| Item | Quantity |
|---|---|
| Box | 1 pc. |
| Carton | 10 pcs. |
| Tray | 150 pcs. |
Physical Data
| Property | Value |
|---|---|
| Net weight | 188.00 g |
| Gross weight | 188.00 g |
| Width | 90.00 mm |
| Height | 67.00 mm |
| Depth | 27.00 mm |
| Weight of the main product | 128.00 g |
Key Features
- High-performance switching power supply: up to 40% energy saving.
- Very low consumption.
- Elegant design and ultra-compact dimensions: Installable in 100x100mm connection boxes.
- EasyF connection system.
- Fully automated production subject to rigorous quality controls.
- Wall-mountable.
- Insertion loss varies depending on whether 1 or 2 outputs are used.
EasyF Connection System: Simplicity and Savings
EasyF is an innovative concept for connecting the internal conductor of the coaxial cable (the core). It is inserted directly into the device, increasing connection reliability. Furthermore, the absence of "F" connectors allows for a reduced chassis size and ensures the connection of two cables with a single screw.
- Real time savings: Installation can be accelerated as coaxial cable connection is not required. It also avoids the process of screwing connectors into the device, which can be complicated in tight spaces.
- Connection reliability: The flap that holds the cables prevents the coaxial cable from loosening.
- Cost savings: No additional connectors (neither "F" nor "IEC") are needed.
- Space optimization: Inputs and outputs are located on the same side of the device, preventing coaxial cable bending and facilitating work within cabinets and distribution boxes.
- Very simple assembly in three steps: Simply unscrew the splitter cover to access the connection, insert the pre-stripped coaxial cables, and close the cover and screw to secure the connection.
EasyF System Reliability
With EasyF, the coaxial cable connection is made through an automatic system of cable insertion (internal conductor) by contact, without the need for soldering.
- Like new from day one: The device's lifespan increases by eliminating potential solder deterioration over time.
- Reduced failure rate: Generally caused by cold solder joints.
- Optimized electromagnetic performance: At high frequencies.
- Reinforcing our commitment to the environment: Contamination from the soldering process is eliminated, and electricity consumption in production is reduced.
Application Example
The diagram shows a typical setup where the Televes PicoKom power supply is used to power an amplifier. The power supply receives input from the TV network and distributes 24V DC to the amplifier via the coaxial cable. The output from the amplifier is then split to feed two points.
Diagram Description:
A satellite dish and antenna are shown connected to a Televes amplifier. The amplifier is connected to the Televes PicoKom 24V 130mA power supply (model 5795/579401) via coaxial cable. The power supply outputs 24V DC to the amplifier. The power supply also has two outputs, each connected to a TV or set-top box, indicated by signal strength bars.
Technical Specifications: Ref. 5795
| Specification | Value (EU) | Value (LU) |
|---|---|---|
| Type of output connector | F | F |
| Number of outputs | 2 | 2 |
| Frequency range | 5 ... 862 MHz | 5 ... 862 MHz |
| Insertion loss: 1 output | 1.5 dB | 1.5 dB |
| Insertion loss: 2 outputs | 4 dB | 4 dB |
| Output voltage | 24 Vdc | 24 Vdc |
| Max. output current | 130 mA | 130 mA |
| Input voltage | 220 ... 230 Vac | 220 ... 230 Vac |
| Mains frequency range | 50 Hz / 60 Hz | 50 Hz / 60 Hz |
| Maximum current | 35 mA | 35 mA |
| Maximum power consumption | 4.4 W | 4.4 W |
| Operating temperature | -5 ... 45 °C | -5 ... 45 °C |
| Protection index (IP) | 20 | 20 |
