Televes PicoKom 1-Output Amplifier
VHF/UHF - LTE700 Ready
Product Description
The Televes PicoKom is an indoor amplifier with a single output, designed for VHF/UHF signals and ready for LTE700/5G. It features automatic gain control for extending terrestrial television home installations. The amplifier incorporates an LTE700/5G filter and a power supply at the input for preamplifiers or a BOSS system.
Key Features:
- Plug&Play: Automatic gain control, no manual adjustments needed.
- Aesthetic design and compact dimensions: Installable in 100x100mm connection boxes.
- EasyF connection system.
- High-performance integrated power supply: Reduced consumption (40% less than a standard amplifier).
- Fully automated production with rigorous quality controls.
- DC pass-through ON/OFF switch for powering preamplifiers or BOSS systems.
- Easy mounting, maintaining minimal bending radius for coaxial cables.
- Wall-mountable.
Technical Specifications
Article Number: 560521
Logical Article: NV241PICOLTE2
EAN13: 8424450246481
Packaging
- Box: 1 pc.
- Carton: 10 pcs.
- Tray: 150 pcs.
Physical Data
- Net Weight: 128.00 g
- Gross Weight: 150.00 g
- Width: 90.00 mm
- Height: 68.00 mm
- Depth: 28.00 mm
- Main Product Weight: 128.00 g
Technical Characteristics (Ref. 560521)
| 47...400 MHz | 470...694 MHz | ||
| Number of outputs | 1 | 1 | |
| TV Output | 14 dB | 12 dB | |
| Frequency Range | MHz | 47 ... 400 | 470 ... 694 |
| Gain | dB | 0 ... 20 | 0 ... 20 |
| Output Level DIN45004B | dBμV | 102 | 105 |
| Output Level EN60728-3 IMD3 2tones -35dB | dBμV | 109 | 112 |
| Output Level 10Ch DVB-T | dBμV | - | 94 |
| Output Level 2CH DBV-T | dBμV | 93 | - |
| Noise Figure | dB | 4 | 4 |
| Input Power Supply | Vdc | 150 | 150 |
| Max Input Current | mA | - | - |
| Input Voltage | Vac | 220 ... 230 | 220 ... 230 |
| Mains Frequency Range | 50 Hz / 60 Hz | 50 Hz / 60 Hz | |
| Max Current | mA | 20 | 20 |
| Max Power Consumption | W | 3,7 | 3,7 |
| Operating Temperature | °C | -5 ... 45 | -5 ... 45 |
| Protection Index (IP) | 20 | 20 |
EasyF Connection System: Simplicity and Savings
EasyF is an innovative concept for connecting the inner conductor of the coaxial cable (the core) directly into the device. This increases connection reliability. Furthermore, by eliminating "F" connectors, the chassis can be reduced, and two cables can be secured with a single screw.
- Real time savings: Installation can be accelerated as coaxial cable connection is not required. The process of screwing connectors onto the device, which can be difficult in tight spaces, is also avoided.
- Connection reliability: The flap that holds the cables prevents the coaxial cable from loosening.
- Cost savings: No additional connectors ("F" or "IEC") are needed.
- Space optimization: Inputs and outputs are on the same side of the device, preventing coaxial cables from being bent and facilitating work within cabinets and distribution boxes.
- Simple three-step assembly: Simply connect and unscrew the covers to connect two cables:
- Unscrew the splitter cover to access the connection.
- Insert the pre-stripped coaxial cables.
- Close the cover and screw to secure the connection.
Discover More About EasyF System Reliability
With EasyF, the coaxial cable connection to the device is made via an automatic cable insertion system (inner conductor) through contact, without the need for soldering.
- Like new from day one: The device's lifespan increases by eliminating potential solder deterioration over time.
- Reduced failure rate: Generally caused by cold solder joints.
- Optimized electromagnetic performance: At high frequencies.
- Reinforcing our commitment to the environment: Contamination caused by the soldering process is eliminated, and electricity consumption in production is reduced.
Application Example
BOSSTech active
Diagram: Power Supply for Mast Amplifier
The diagram illustrates the power supply connection for a mast amplifier. A DC voltage (Vdc) is supplied from the Televes PicoKom amplifier (model 560521/560522) to the mast amplifier (AMP). The PicoKom unit also has a "DC IN" port with an ON/OFF switch, indicating it can receive power or supply it. The output from the PicoKom is connected to a wall socket.
