Televes PicoKom Amplifier Kit
Low Gain Mast Amplifier and Power Supplies
Product Overview
The Televes 536023 + 579401 PicoKom kit includes a low gain mast amplifier and power supplies, designed to amplify terrestrial television signals from various antennas. The kit is composed of:
- Art. 536023: Low gain mast amplifier with 3 inputs (BIII/DAB-UHF-UHF). It amplifies signals from different antennas and is powered by 12Vdc through the coaxial cable. It is Red compliant.
- Art. 579401: PicoKom Power Supply, 12V - 200mA, 2 outputs. This indoor power supply provides 12V (200mA) and sends power through the input coaxial cable, allowing TV signal passage. It is used to power mast amplifiers or BOSS systems and includes a splitter for two outputs.
Key Features
- Separate amplification for each band
- EasyF connection system
- LTE/5G filter to eliminate telephone interference
- ON/OFF switch for DC power passage to UHF inputs, for powering a BOSS system
- Simple mounting with included mast fastening strap
- Housing made of resistant ABS plastic for outdoor installation
- Fully automated production with rigorous quality controls
- High shielding chassis made of Zamak
EasyF Connection System: Simplicity and Savings
EasyF is an innovative connection concept for the coaxial cable conductor (core), which is inserted directly into the device, increasing connection reliability. The absence of "F" connectors allows for a reduced chassis and secures the connection of two cables with a single screw.
- Real time savings: Installation can be accelerated as coaxial cable connection is not required. The process of screwing connectors into the device, which can be complicated in tight spaces, is also avoided.
- Connection reliability: The door that holds the cables prevents the coaxial cable from loosening.
- Economic savings: No additional connectors ("F" or "IEC") are needed.
- Space optimization: Inputs and outputs are located on the same side of the device, preventing coaxial cables from bending and facilitating work within distribution cabinets and boxes.
- Simple assembly in three steps: Connect and unscrew the covers to connect two cables: 1. Unscrew the splitter cover to access the connection. 2. Insert the pre-stripped coaxial cables. 3. Close the cover and screw to secure the connection.
The EasyF connection system ensures automatic cable insertion (internal conductor) via contact, without the need for soldering. This increases the device's lifespan by eliminating potential solder deterioration over time, reduces failure rates typically caused by cold soldering, optimizes electromagnetic performance at high frequencies, and reinforces environmental commitment by eliminating contamination from soldering processes and reducing electricity consumption in production.
Why Choose an Amplifier with LTE790/700 Selectable Filter?
The integrated anti-LTE filtering switch in Televés amplifiers allows selection of the most appropriate internal filter between channels 60 (790MHz) or 48 (694MHz). This adapts to the frequencies of the DTT channelization, completely cutting off the LTE signal present in the area that could interfere with the product.
This feature provides versatility to keep the installation free of interference depending on the LTE signal present, covering filtering needs in any territory with a single amplifier. It simplifies installation logistics as only the filter modification is needed to adapt the system to the Digital Dividend operating in the region, and also accommodates contingencies that may arise during the implementation of the Digital Dividend, such as delays or advances in its planning.
Technical Specifications (Ref. 536012)
| Bands | BIII | UHF 1 | UHF 2 |
|---|---|---|---|
| Frequency range (MHz) | 174 ... 254 | 470 ... 790 | |
| Gain (dB) | 26 | 28 | |
| Gain adjustment range (dB) | 0 ... 18 | 0 ... 15 | |
| Output level DIN45004B (dBμV) | 109 | 114 | |
| Output level EN60728-3 IMD3 2tones -35dB (dBμV) | 115 | 121 | |
| Output level EN60728-3 IMD3 2tones -60dB (dBμV) | 105 | 111 | |
| Noise figure (dB) | 5 | 9 | |
| Number of inputs | 3 | ||
| Inputs/Bands | BIII/DAB | UHF | UHF |
| Max input current (mA) | 70 | 70 | |
| Power supply (Vdc) | 12 | 12 | 12 |
| Current consumption (mA) | 23 | ||
| Protection index (IP) | IP55 | ||
| Operating temperature (°C) | -5 ... 45 |
Product Details
Art.: 536012
EAN13: 8424450228630
Color: Orange
Net weight: 555.00 g
Gross weight: 555.00 g
Packaging: 1 pc. box
