Televes
Kit Amplificateur de mât NanoKom et Alimentation PicoKom
Reference: 561721 + Ref. 5795
Kit composed of:
Ref. 561721: NanoKom Mast Amplifier
Description: Amplifies and couples terrestrial television signals from different antennas. It features 3 inputs: two UHF inputs are amplified, while the VHF input is only coupled. The amplifier is powered via the output coaxial cable. RED Compliant.
Ref. 5795: PicoKom Power Supply
Description: 24V (130mA) power supply that transfers current through the input coaxial cable while allowing the TV signal to pass. It is used in installations to remotely power mast amplifiers or a BOSS system. It also includes a splitter to generate two outputs.
| Ref. | 568010 |
| EAN13 | 8424450236741 |
Physical Data
| Colour | Orange |
| Packaging | 1 piece |
| Net weight | 386.00 g |
| Gross weight | 413.00 g |
| Width | 88.00 mm |
| Height | 79.00 mm |
| Depth | 42.00 mm |
| Main product weight | 386.00 g |
You will like
- Separate amplification with a very low noise factor, maintaining signal quality.
- Ergonomic, ultra-compact design.
- EasyF connection system.
- Can be powered between 12 and 24V.
- LTE700/5G filter to eliminate mobile telephony interference.
- ON/OFF switch for CC remote powering on the UHF input to activate a BOSS system.
- Simple mounting. Supplied with a mast fixing bracket.
- Orange ABS plastic casing resistant for outdoor installations.
- Fully automated manufacturing with rigorous quality controls.
- Shielded chassis made of Zamak.
Discover
EasyF Connectivity: Simplicity and Economy
EasyF is an innovative concept for connecting the internal conductor of the coaxial cable (core), which is inserted directly into the device to increase connection reliability. Furthermore, by eliminating "F" connectors, the chassis can be reduced, securing the connection of two cables with a single screw.
- Real time saving: Installation time is reduced as coaxial cables do not need to be connectorized. It also avoids the process of screwing connectors onto the device, which can be complicated in tight spaces.
- Connection reliability: The bracket holding the cables prevents the coaxial cable from detaching.
- Notable economy: No additional connectors (like "F" or "CEI") are needed.
- Space optimization: Inputs and outputs are always on the same side of the product, preventing coaxial cables from bending and facilitating work inside cabinets and enclosures.
- Very simple three-step mounting: Simply unscrew and screw the covers to connect two cables:
- Unscrew the splitter cover to access the connection.
- Insert pre-stripped coaxial cables.
- Close the cover and screw to secure the connection.
Learn more about EasyF connectivity reliability
With EasyF, the coaxial cable connection to the product is made via an automated system of core (internal conductor) insertion by contact, without requiring soldering.
- Like new: Increases the device's lifespan by eliminating the possibility of solder deterioration over time.
- Reduced defect rate: Generally caused by cold soldering.
- Optimized electromagnetic performance: at high frequencies.
- Strengthened commitment to the environment: Contamination caused by the soldering process is eliminated, and production electricity consumption is reduced.
Application Example
A diagram shows a typical installation setup. Antennas (UHF and VHF) are connected to the NanoKom mast amplifier (561721/568010). The amplifier is powered by the PicoKom power supply (PSU) via coaxial cable (Vdc). The output signal (RF) from the amplifier is then distributed to a television (TV) and potentially other devices through splitters.
