Televes NanoKom Mast Amplifier and PicoKom Power Supply Kit
Product References: Ref. 561621 + Ref. 579401
Kit Composition
Ref. 561621: NanoKom Mast Amplifier
- 3 inputs: UHF, VHFmix, FImix.
- Designed for mast installation to amplify and mix terrestrial and satellite television signals from various antennas.
- Amplifies the UHF signal while VHF and FI (SAT) inputs only mix.
- Allows DC pass-through to the satellite input for LNB power.
- RED compliant.
Ref. 579401: PicoKom Power Supply
- 12V - 200mA power supply.
- Provides power via the coaxial input cable, allowing TV signal passage.
- Used to power mast amplifiers or BOSS systems.
Technical Specifications
General:
- Reference: 567810
- EAN13: 8424450174043
Physical Data:
- Net Weight: 386.00 g
- Gross Weight: 386.00 g
- Width: 88.00 mm
- Height: 78.00 mm
- Depth: 42.00 mm
- Product Weight: 199.00 g
Packaging:
- Box: 1 unit.
Key Features
- USOS Technology (User Selectable Output Signal): Installer selects desired output level, which remains stable. Device automatically adjusts gain based on input signal variations.
- Separate amplification with very low noise figure, preserving signal quality.
- Ultra-compact ergonomic design.
- EasyF Connection System
- Operates from 12V to 24V.
- LTE/5G filter to eliminate telephone interference.
- ON/OFF switch for DC pass-through to the UHF input, for powering BOSS systems.
- Simple mounting with included mast-fixing clamp.
- Orange ABS plastic casing for outdoor installation, with high resistance.
- Fully automated manufacturing with rigorous quality controls.
- High-shielding chassis made of Zamak.
EasyF Connection System: Simplicity and Savings
The EasyF system is an innovative connection concept for the central conductor (live wire) of the coaxial cable, providing a direct connection to the device for increased reliability. By eliminating "F" connectors, the chassis is reduced, and two coaxial cables can be connected in the same compartment.
- Time Savings: Significantly reduces installation time by eliminating the need for connector application.
- Space Saving: Avoids the connector tightening process, which can be cumbersome in confined spaces.
- Connection Reliability: The cable clamp prevents the cable from coming loose.
- Economical: Does not require additional connectors ("F" or "CEI").
- Space Optimization: Inputs and outputs are on the same side of the device, preventing coaxial cable kinking and facilitating work within cabinets and boxes.
- Simple Mounting (3 Steps): Open and screw the clamp to connect the cables.
More Information on EasyF System Reliability
With EasyF, coaxial cable connection is achieved through an automatic contact-based insertion of the live wire (central conductor), eliminating the need for soldering.
- Durability: Increases device lifespan by eliminating solder joints that can deteriorate over time.
- Reduced Failure Rate: Minimizes failures typically caused by cold solder joints.
- Optimized Electromagnetic Performance: Ensures optimal performance at high frequencies.
- Environmental Commitment: Eliminates contamination from the soldering process and reduces electrical consumption associated with manufacturing.
