Televes NanoKom Mast Amplifier Kit and PicoKom Power Supply
Product References: Ref. 561621 + Ref. 5796
Product Description
The Televes NanoKom mast amplifier kit, Ref. 561621, is designed for amplifying and combining terrestrial and satellite television signals from multiple antennas. It features three inputs: UHF, VHF, and SAT. The UHF input is amplified, while the VHF and SAT signals are mixed. The device allows for DC pass to the satellite input to power the LNB.
The kit includes the PicoKom power supply, Ref. 5796, which is a 12 V - 220 mA power supply with one output. This power supply powers equipment through the input coaxial cable while allowing TV signal transmission. It is suitable for powering mast amplifiers or BOSS systems and is compatible with satellite mixing amplifiers (IFmix). It detects LNB management signals (voltage and tone) from a receiver to allow signal passage to the input.
Kit Contents
- Ref. 561621: NanoKom mast amplifier (3 inputs: UHF-VHFmix-IFmix)
- Ref. 5796: PicoKom power supply (for IFmix)
Physical Data
| Attribute | Value |
|---|---|
| Colour | Orange |
| Net weight | 514.00 g |
| Gross weight | 564.00 g |
| Width | 88.00 mm |
| Height | 79.00 mm |
| Depth | 42.00 mm |
| Main product weight | 387.00 g |
Packaging Information
- Blister: 1 pcs.
- Box: 8 pcs.
Key Features & Highlights
- Equipped with USOS (User Selectable Output Signal) technology for stable output level and automatic gain adjustment.
- Separate amplification and very low noise figure, preserving signal quality.
- Ultra-small ergonomic design.
- EasyF connection system.
- Operates within a 12 V to 24 V range.
- Fully automated manufacturing adhering to stringent quality controls.
- High-screening Zamak chassis.
- Includes an LTE700/5G filter to mitigate mobile phone interference.
- Features an ON/OFF switch for DC pass to the UHF input, enabling BOSS system power.
- Easy mounting with an included plastic tie for mast installation.
- Durable ABS-plastic orange casing suitable for outdoor installation.
EasyF Connection System: Simplicity and Savings
EasyF is an innovative connection concept where the coaxial cable's inner conductor is directly inserted into the device, enhancing connection reliability. The absence of F connectors allows for a reduced chassis size and secures two cables with a single screw.
- Time Savings: Expedited installation due to no need for coaxial cable termination or screwing connectors onto the device, especially in tight spaces.
- Connection Reliability: A clamp mechanism prevents the coaxial cable from detaching.
- Cost Savings: Eliminates the need for additional F or IEC connectors.
- Space Optimization: Inputs and outputs are located on the same side, preventing cable bending and facilitating work within cabinets and boxes.
- Easy Three-Step Mounting:
- Unscrew the device's cover.
- Insert the stripped coaxial cables.
- Close the cover and screw to secure the connection.
EasyF System Reliability: The connection is made via an automated system for inner conductor contact insertion, without soldering.
- Increased Lifespan: Eliminates solder wear-out over time.
- Reduced Failure Rate: Avoids issues associated with cold soldering joints.
- Optimized Electromagnetic Behavior: Beneficial for high frequencies.
- Environmental Commitment: Eliminates pollution from welding processes and reduces production power consumption.
Application Example
The diagram illustrates a typical installation scenario for the Televes NanoKom mast amplifier kit and PicoKom power supply. It shows antennas (UHF, VHF, SAT) connected to the NanoKom amplifier, which is then connected to the PicoKom power supply. The power supply is linked to a set-top box (STB) and a TV. The diagram indicates signal flow and power distribution, including options for STB ON/OFF and LNB power.
