Zumtobel PST PIR CF TEC2 Mounting Instructions
Reference: 00159920
Model: PST PIR CF TEC2
IP Rating: IP20
Important Notices and Safety
? Important notices. Please, read first! Keep the instructions safe. Specifications are subject to change without notice! If you have questions, please contact the manufacturer.
The installation and commissioning of the luminaire, as well as any modification, must only be performed by authorized personnel (qualified electrician). National installation regulations must be observed. Before any work on the appliance, it must be disconnected from mains. Hot plug-in is not an option and may cause damage to the lamp or luminaire. The manufacturer is not liable for damages resulting from improper or faulty installation, operation, or unauthorized modifications to the luminaire.
⚠️ Caution, risk of electric shock!
Dimensions
The luminaire has the following approximate dimensions:
- Length: 250 mm
- Width: 98 mm
- Height: 80 mm
Note on Cleaning: Be aware of chemical resistance. Use only cleaning agents suitable for plastics.
Mounting Instructions
Step 1: Connecting to the Track
1a. Position the luminaire's connector onto the top start track. Refer to TEC2 pages 10-13 for detailed information.
Wiring Configuration: Observe the terminal block connections. Ensure correct wiring as indicated. The luminaire uses a terminal block with functions such as F3b, F3a, F2b, F2a, DA-, DA+, L1, N, L2, EN1, L3, EN2, EL1, PE, EL2. A simplified connection might show L1, L2, L3, EL1, EL2. Visuals compare correct (✔️) and incorrect (❌) wiring configurations.
1b. Insert the luminaire into the track. This may involve a push-and-click mechanism. An optional tool might be used.
1c. Secure the luminaire using the CLIX mechanism. Ensure it clicks into place.
Step 2: Further Track Connection and Wiring
2a. Similar to Step 1a, connect the luminaire to the track system. Observe the terminal block configurations. Ensure correct wiring. Visuals show correct (✔️) and incorrect (❌) wiring configurations for terminals like L1, L2, L3, N, EL1, EL2, EN1, EN2.
2b. Engage the CLIX connector by pressing it.
2c. Push the luminaire into the track, ensuring the CLIX mechanism engages.
2d. Verify the connection. Ensure L1 and L2 are correctly connected. A warning symbol (⚠️) indicates potential issues with incorrect wiring.
Wiring Diagram Summary: The luminaire is designed for AC 220-240 V. Ensure correct wiring of L1, L2, L3, N, EL1, EN1, EL2, EN2.
Step 3: Attaching Luminaire to Track System
3a. Align and insert the luminaire's mounting mechanism into the track.
3b. Engage the locking mechanism by pressing the designated levers.
3c. Confirm the luminaire is securely locked in place.
Step 4: Dismounting
To dismount:
- Press the release lever (indicated by '1').
- Simultaneously, press the locking mechanism (indicated by '6') and pull the luminaire away from the track.
Sensor Coverage and Options
The luminaire is equipped with a PIR sensor. The detection range and coverage depend on the mounting height and room dimensions.
Movement Detection Range
The following table details the detection range (L) and width (W) based on mounting height (H):
| H (m) | L (m) | W (m) |
|---|---|---|
| 2,00 | 10,00 | 7,00 |
| 2,50 | 12,50 | 9,00 |
| 3,00 | 15,00 | 10,00 |
| 3,50 | 18,00 | 12,00 |
| 4,00 | 21,00 | 14,00 |
| 4,50 | 24,00 | 16,00 |
| 5,00 | 26,00 | 18,00 |
| 6,00 | 26,00 | 18,00 |
| 7,00 | 28,00 | 19,00 |
| 8,00 | 28,00 | 19,00 |
Additional dimensions for larger areas: 30.00 m x 20.00 m at 9.00 m height, and 16.00 m at 9.00 m height.
Optional Accessories
Two optional accessories are available, Option A and Option B, which may affect the luminaire's appearance or function. Conceptual diagrams illustrate their attachment and potential coverage.
Option A:
The following table provides dimensions for Option A:
| H (m) | L (m) | W (m) |
|---|---|---|
| 2,00 | 8,00 | 2,00 |
| 2,50 | 9,80 | 2,00 |
| 3,00 | 11,00 | 2,00 |
| 3,50 | 13,60 | 2,50 |
| 4,00 | 15,80 | 2,50 |
| 4,50 | 17,80 | 2,50 |
| 5,00 | 19,20 | 3,00 |
| 6,00 | 19,20 | 3,00 |
| 7,00 | 22,60 | 3,00 |
| 8,00 | 20,60 | 4,00 |
| 9,00 | 22,00 | 4,00 |
| 10,00 | 22,00 | 4,00 |
| 11,00 | 24,00 | 5,00 |
| 12,00 | 24,00 | 5,00 |
| 13,00 | 27,00 | 5,00 |
| 14,00 | 27,00 | 6,00 |
| 15,00 | 30,00 | 6,00 |
| 16,00 | 30,00 | 6,00 |
Option B:
The following table provides dimensions for Option B:
| H (m) | L₁ (m) | L₂ (m) | W (m) |
|---|---|---|---|
| 2,00 | 4,00 | 0,50 | 2,00 |
| 2,50 | 4,90 | 0,50 | 2,00 |
| 3,00 | 5,50 | 0,50 | 2,00 |
| 3,50 | 6,80 | 0,50 | 2,50 |
| 4,00 | 7,90 | 1,00 | 2,50 |
| 4,50 | 8,90 | 1,00 | 2,50 |
| 5,00 | 9,60 | 1,00 | 3,00 |
| 6,00 | 9,60 | 1,00 | 3,00 |
| 7,00 | 11,30 | 1,50 | 3,00 |
| 8,00 | 10,30 | 1,50 | 4,00 |
| 9,00 | 11,00 | 1,50 | 4,00 |
| 10,00 | 11,00 | 1,50 | 4,00 |
| 11,00 | 12,00 | 2,00 | 5,00 |
| 12,00 | 12,00 | 2,00 | 5,00 |
| 13,00 | 13,50 | 2,00 | 5,00 |
| 14,00 | 13,50 | 2,00 | 6,00 |
| 15,00 | 15,00 | 2,00 | 6,00 |
| 16,00 | 15,00 | 2,00 | 6,00 |
Programmer Information
For programming the luminaire, the basicDIM ILD G2 Programmer is used. Article number: 28003484.
Further information can be found at: https://www.tridonic.com/28003484
