Resclite Pro Tecton II Battery Replacement Instructions
Product Name: RESCLITE PRO TECTON II
Reference Numbers: 00160166 (Mounting Instructions), 00159920 (TEC2 Mounting Instructions)
Manufacturer: Zumtobel Lighting GmbH
Battery Replacement
If the backup power does not extend to the declared duration, the battery must be replaced. The electric source for safety service is not a user-serviceable item and shall only be replaced by the manufacturer's service agent or a similarly qualified person.
Battery Types
| Type | SAP Code | Article Description |
|---|---|---|
| E1D | 59014292 | ACCU_LIION 3.2V 1.5Ah 18650 1 STI #100mm |
| E3D | 59014293 | ACCU_LIION 3.2V 3Ah 18650 2 SBS #100mm |
Replacement Procedure
Step 1: Preparation
The process begins with power disconnection, indicated by a lightning bolt icon [lightning bolt]. The diagram shows the luminaire and a battery pack with an 'OFF' indicator [power off]. A general warning states: ⚠️ DO NOT OPEN LUMINAIRE! This is followed by instructions to OPEN LUMINAIRE for battery replacement. The illustration shows a battery pack being removed and a new one inserted, signifying the swap.
Step 2: Accessing the Battery Compartment
To access the battery, the luminaire housing must be unlocked and opened. This is depicted with a lock icon [lock] and a sequence of actions involving latches. A close-up view highlights the specific latch mechanism.
Step 3: Removing the Old Battery
The diagram illustrates disconnecting and removing the battery pack from its housing. A lock icon [lock] is shown, followed by steps to disengage the connector. A close-up view details the connector release.
Step 4: Installing the New Battery
The new battery pack is installed and connected. The diagram labels the new battery as '4e NEW' and the old battery as '4d OLD', with a recycle bin icon [recycle bin] indicating disposal. Components '4a', '4b', '4c' relate to the housing. The '4f' section provides space to record the 'Commissioned Date' or 'Inbetriebnahme'. Diagrams '4g', '4h', and '4i' illustrate the 'CLIX' connector mechanism used for securing parts.
Safety Precautions
Lithium Battery Warning
⚠️ CAUTION: Lithium batteries included! OBSERVE Manufacturer's Safety Instructions!
Do not tamper with the rechargeable batteries and/or battery packs in any way. In principle, lithium batteries are comparatively safe when handled properly.
Possible Hazards of Lithium Batteries
Lithium batteries or lithium accumulators contain:
- Lithium or its compound (reacts violently)
- Flammable organic solvents
- Oxidising agents (fire promoters)
- Reactive halogen compounds
A graphic depicts batteries with flames and a warning symbol [warning symbol]. Safety Data Sheets are referenced for Tridonic (EN) and Zumtobel (DE) via text placeholders for QR codes: [QR code placeholder for SDS EN], [QR code placeholder for SDS DE].
ExD Status LED Indicators
This section details the meaning of the status LEDs on the luminaire.
LED GREEN / GRÜN
| Indicator Pattern | Status |
|---|---|
| Solid light (1s) | Everything okay / Alles o. k. |
| Pulsing (1s on, 1s off) | Function test / Funktionstest |
| Pulsing (1s on, 1s off) | Service life test / Betriebsdauertest |
| Short flashes (0.1s) | Disabled / Blockiert |
LED RED / ROT
| Indicator Pattern | Status |
|---|---|
| Solid light (1s) | Lamp failure / Lampenfehler |
| Pulsing (1s on, 1s off) | Charging failure / Ladefehler |
| Pulsing (1s on, 1s off) | Battery failure / Batteriefehler |
STATUS LED
A diagram illustrates the status LED indicator.
