This document provides essential mounting instructions, technical specifications, and product details for the Zumtobel TEC2 lighting element system. It covers various product series including AMPHIBIA, CRAFT II, ECOOS II, and CLARIS evolution, along with the TEC2 Flex-Adapter and track system components.
Reference: 00159920 (TEC2 Mounting Instructions)
Manufacturer: Zumtobel Lighting GmbH
For questions, please contact the manufacturer.
Product Series Overview
The TEC2 system encompasses several product families:
- AMPHIBIA: AMP S / S BAS TEC2, AMP L / L BAS / L LT TEC2
- CRAFT II: CR2 M / L TEC2, CR2PL M / L TEC2
- ECOOS II: ECOOS2 TEC2 L12 / L15 MPO (E3D), ECOOS2 SLIM TEC2 L12 / L15 MPO (E3D)
- CLARIS evolution: CLEVO MSC L1280-L3080 TEC2
TEC2 Flex-Adapter
The TEC2 Flex-Adapter is a key component for the TEC2 track system. Mounting instructions are detailed across several pages, focusing on correct wiring and connection.
Reference: 00159920
General Mounting Instructions
Important notices: Please read first! Keep the instructions safe! Specifications are subject to change without notice.
Step 1a/2a: ON THE TOP Start Track
Diagram showing the 'ON THE TOP Start Track' installation step, involving inserting a component into a track. Refer to TEC2 pages 10-13 for detailed information.
Wiring diagrams illustrate connection terminals (FUNC.) with labels like F3b, F3a, F2b, F2a, DA-, DA+, L1, N, L2, EN1, L3, EN2, EL1, PE, EL2. Two configurations are shown: one marked with '=' (correct) and one with '≠' (incorrect).
Illustrations demonstrate the process of connecting modules, with a checkmark ✅ for correct connection and a cross ❌ for incorrect connection. The CLIX mechanism is highlighted for secure locking.
Step 1b/2b/2c/2d/2e/2f/2g: Module Connection and Locking
Visuals demonstrate the insertion and locking of modules into the track system using the CLIX mechanism. Arrows indicate the direction of insertion and locking.
A warning symbol ⚠️ is shown next to a diagram illustrating correct wiring for L1 and L2 connections, contrasting it with an incorrect configuration.
Diagrams show electrical connections for AC 220-240 V and DC 0-250 V, with correct and incorrect wiring paths indicated.
Option: Emergency Lighting (Centrally Supplied)
Diagrams illustrate the setup for emergency lighting, showing different modes of operation (0-6) and facilities (A-F) using the ZUMTOBEL module.
Instructions for operation: If the TECTON track is used to operate centrally supplied emergency luminaires, the track and components must be connected to a system designed for this purpose. If the TECTON track is used to supply self-contained emergency luminaires, the supply line for battery recharging must be un-switched.
Product Specifications
AMPHIBIA Series: AMP S / L TEC2
Images of AMP S and AMP L luminaires. Dimensional diagrams show lengths L1, L2, width W, and height H.
IP Ratings: IP20 (TEC2), IP66 (AMPHIBIA)
| Model | L1 | L2 | W | H | WEIGHT |
|---|---|---|---|---|---|
| AMP S TEC2 | 1000 mm | 1100 mm | 92 mm | 104 mm | 2,6-3,2 kg |
| AMP L TEC2 | 1500 mm | 1600 mm | 92 mm | 104 mm | 4,85-5,0 kg |
CLARIS evolution Series: CLEVO MSC TEC2
Image of CLEVO MSC luminaire. Dimensional diagram shows length L, width W, and height H.
| Model | L | W | H | WEIGHT |
|---|---|---|---|---|
| CLEVO L1280 TEC2 | 1280 mm | 166,5 mm | 38 mm | 3,75 kg |
| CLEVO L1580 TEC2 | 1580 mm | 166,5 mm | 38 mm | 4,5 kg |
| CLEVO L2480 TEC2 | 2480 mm | 166,5 mm | 38 mm | 7,1 kg |
| CLEVO L3080 TEC2 | 3080 mm | 166,5 mm | 38 mm | 8,13 kg |
CRAFT II Series: CR2 / CR2PL TEC2
Images of CR2 L/M TEC2 and CR2PL L/M TEC2 luminaires. Dimensional diagrams show lengths L1, L3, width W, and height H.
IP Ratings: IP20 (TEC2), IP66 (CRAFT II)
| Model | L1 | L3 | W | H | WEIGHT |
|---|---|---|---|---|---|
| CR2 L TEC2 | 1045 mm | 1000 mm | 469 mm | 97 mm | 10,2 kg |
| CR2 M TEC2 | 539 mm | 500 mm | 469 mm | 97 mm | 5,6 kg |
| CR2PL L TEC2 | 1025 mm | 1000 mm | 414 mm | 139 mm | 13,4 kg |
| CR2PL M TEC2 | 518 mm | 500 mm | 414 mm | 139 mm | 7,2 kg |
ECOOS II Series: ECOOS2 TEC2 L12 / L15 MPO (E3D)
Images of ECOOS2 TEC2 and ECOOS2 SLIM TEC2 luminaires. Dimensional diagrams show length L, width W, and height H.
| Model | L | W | H | WEIGHT |
|---|---|---|---|---|
| ECOOS2 L12 (E3D) | 1251 mm | 120 mm | 60 mm | 4,0 kg |
| ECOOS2 SLIM L12 (E3D) | 1251 mm | 152 mm | 32 mm | 6,8 kg |
| ECOOS2 L15 (E3D) | 1500 mm | 120 mm | 60 mm | 5,0 kg |
| ECOOS2 SLIM L15 (E3D) | 1500 mm | 152 mm | 32 mm | 7,7 kg |
TEC2 Track System Installation and Dismounting
Diagram illustrating the installation of the TEC2 track system, showing mounting points and track alignment.
Detailed steps for mounting components onto the track, including locking mechanisms (indicated by a lock symbol ? and an eye symbol ?️).
Instructions for dismounting components, showing a sequence of actions (1, 2) involving releasing a locking mechanism.
Specific mounting instructions for CR2/CR2PL TEC2 models, including the use of connecting elements and ensuring correct alignment and connection, indicated by checkmarks ✅.
For more detailed information, please refer to the official Zumtobel website: www.zumtobel.com
