Zumtobel SUPERSYSTEM INTEGRAL

Product Identification

Model Series: SUPERSYSTEM INTEGRAL

Specific Models: SUI TG6/TSG6 SWI/LDO/BC 3CV 3CV (WW)

Manufacturer: Zumtobel Lighting GmbH

Address: Schweizerstrasse 30, 6851 Dornbirn AUSTRIA

UK Contact: Thorn Lighting Limited, Durhamgate Spennymoor, Co. Durham DL16 6HL UK

Product Variants and Part Numbers

SWI Type: S14879, S14880, S14937

LDO Type: S14885, S14886, S14936

BC Type: S14897, S14898, S14938

Adapter Types: T14868 CE (6A 250V, Fmax 50N), T14869 CE (6A 250V, Fmax 50N)

Safety and Installation Precautions

General Safety:

• Installation and commissioning, as well as any modifications, must be performed by authorized personnel (qualified electricians) only.
• The manufacturer is not liable for damages resulting from improper installation, operation, or unauthorized modifications.
• The luminaire is intended solely for lighting and must be installed according to national regulations. Any other use is considered "not according to instructions".
• Caution: Risk of electric shock! Disconnect mains cables and DALI control lines before maintenance or assembly and ensure power is off.
• Interrupting the neutral conductor during operation can cause overvoltage damage to the lighting system. Neutral disconnect terminals in three-phase AC circuits must only be opened when de-energized and closed before power is restored.
• Commissioning after construction is permitted only when mains voltage is continuously present.
• Dispose of packaging and luminaires in accordance with applicable regional environmental regulations.
• Technical specifications are subject to change without notice. Contact the manufacturer for questions.

Specific Warnings:

• The DALI control inputs are fitted with an irreversible fuse. In case of overvoltage at DA/DA inputs (e.g., mains voltage), repair can only be effected at the factory.
• Using the adapter or track box with standard 3-phase installations (not ZUMTOBEL L3 + DALI tracks) may damage the luminaire and is prohibited.
• Rotating the adapter counter-clockwise will destroy the adapter and its built-in electronic components.

Electrical Information

Voltage: 220-240V / 50/60Hz

DALI System Compatibility: Compatible with ZUMTOBEL L3 and DALI track systems and DALI installations as per diagram.

Product Dimensions and Mounting Details

Dimensions:

• Main body length: 160 mm, 398 mm
• Width: 50 mm, 57 mm, 83 mm
• Height/Depth: 34.6 mm, 76 mm

Mounting Instructions:

Detailed diagrams illustrate the mounting process, including:

• Attaching the luminaire to the track system.
• Connecting electrical components (SWI/BC, DALI).
• Adjusting the angle of the luminaire (e.g., 25°, 90°, 20°).
• Securing the luminaire with clips or screws.
• Dismantling procedures are also illustrated.

Control and Software

Control System: DALI

App Control: Tridonic basicDIM Wireless Control App is available for download for Bluetooth (BC) enabled devices. Planning notes and app documentation are available for both German [DE] and English [EN].

Disposal Information

Dispose of packaging and the luminaire in an environmentally friendly manner according to applicable regional regulations.

LED Information

LED Risk Group: Risk Group 2 (IEC TR 62778 - IEC62471)

Positioning: The luminaire should be positioned to avoid prolonged staring at close distances (closer than 0.27 m is not expected).