RESCLITE PRO TECTON II
Reference: 00159920
Document: Mounting Instructions TEC2
Emergency Options
- ExD self-contained (battery)
- ECx central battery (230 V supply)
- ELP low-voltage central battery (48 V supply)
Important Notices
? Important notices. Please read first! Keep the instructions safe! Specifications are subject to change without notice! If you have questions, please contact the manufacturer.
This message is also provided in German, French, Italian, Spanish, Dutch, Swedish, Finnish, Russian, Polish, Chinese, and Arabic.
Overview
General view of the Resclite Pro Tecton II luminaire, showing its mounting on a track system. The diagram indicates mounting points and reference numbers (1-6) for specific components, along with an IP20 and IK04 rating.
Dimensions
The luminaire has the following dimensions:
- Length: 250 mm
- Width: 60 mm
- Height: 44 mm
Care and Maintenance
⚠️ Chemical Resistance: Note: Due to problems with chemical resistance, choose cleaning materials which are suitable for plastic. Respectez la résistance chimique du matériel: n'utilisez que des détergents compatibles avec les matières synthétiques. Rispettare la resistenza chimica del materiale: utilizzare solo detersivi compatibili con materiali plastici. Rekening houden met chemische weerstand. Gelieve enkel reinigingsmiddelen te gebruiken die Kunststofvriendelijk zijn.
Lenses Options
The luminaire is available with various lens options for different light distribution patterns:
- escape
- escape HP
- escape 90°
- escape 90° HP
- antipanic
- antipanic HP
- spot
- spot HP
- escape HC
- antipanic HC
Visual representations of these lenses and their associated beam patterns are provided on subsequent pages.
Light Distribution Patterns
Escape and Antipanic Lenses
Diagrams show the light distribution for 'escape' and 'antipanic' lenses. The 'escape' lens typically provides a wide, even spread. The 'antipanic' lens is shown with a wider spread, suitable for escape routes. A checkmark ✔️ indicates correct placement/usage, while a cross ❌ indicates incorrect.
Spot Lenses
Diagrams show the light distribution for 'spot' lenses, providing a more focused beam. The 'spot HP' lens is also depicted.
Spot Version Specific Note
? Spot Version Note: The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1.18 m is not expected.
This note is also provided in German, French, Italian, and Dutch.
Light Distribution Patterns (Continued)
Escape 90° and Escape 90° HP Lenses
Diagrams illustrate the beam pattern for the 'escape 90°' lens, showing light directed at a corner or edge, and the 'escape 90° HP' variant.
Escape HC and Antipanic HC Lenses
Diagrams show the light distribution for 'escape HC' and 'antipanic HC' lenses. The 'escape HC' is depicted with a central beam and side illumination, with a checkmark ✔️ for correct placement and a cross ❌ for incorrect. The 'antipanic HC' shows a wider spread suitable for larger areas.
Installation Steps
Variant Identification
The luminaire is available in ExD (self-contained battery) and ECx / ELP (central battery) variants. Tools required include a screwdriver and pliers.
Step 1: Lens Adjustment
(1a) Use a screwdriver to adjust the lens. The adjustment range is approximately ±90°.
(1b) Use pliers to adjust the lens angle. The mechanism makes a "CLIX...CLIX..." sound when adjusted.
(1c) Visually confirm the lens position.
(1d) Tighten screws to a torque of 1.2 Nm.
Step 2: OPTION ExD ONLY (Self-contained Battery)
This section details the installation of the battery for the ExD variant.
E1D and E3D Variants: Two battery types are shown, E1D and E3D, both from Zumtobel.
(2a) Note the "Commissioned Date" field on the battery.
(2b), (2c), (2d) Steps for inserting the battery into the luminaire. The battery and its cover are secured with a "CLIX" mechanism.
⚠️ Caution: Do not tamper with the rechargeable batteries and/or battery packs in any way. The diagram shows a warning symbol indicating incorrect battery insertion or handling.
Step 3: Switch Mode Selection via Jumper
The luminaire's operating mode can be selected using a jumper:
- Jumper IN (delivery state): Sets the luminaire to 'maintained light' mode (Dauerlicht, régime permanent, modalità sempre accesa, permanente verlichting, luz permanente).
- Jumper OUT: Sets the luminaire to 'non-maintained light' mode (Bereitschaftslicht, régime non permanent, modalità solo emergenza, niet-permanente verlichting, circuito de reserva).
Mode Specifics:
- ExD: Jumper selection for stand-alone luminaires. Connected system overwrites selection.
- ECD, ECP: Jumper position is not relevant. Connected system overwrites selection.
- ECC: Do not remove jumper. These are 'maintained only' luminaires. Removal of jumper leads to loss of 'AC emergency mode' function.
- ELP: No jumper available. Connected system sets the switch mode.
Luminaire Marking (acc. IEC/EN 60598-2-22)
The luminaire marking provides information on its specifications:
| Category | Details |
|---|---|
| Supply version | X: self-contained version Z: central battery version |
| Mode of operation | 0: non-maintained mode 1: maintained mode |
| Autonomy time | 60: 1 hour 120: 2 hours 180: 3 hours 480: 8 hours |
| Facilities | A: including test device B: including remote rest mode C: including inhibiting mode D: high risk task area luminaire E: with non-replaceable lamp(s) and/or batteries F: Control gear with automatic test facility according to IEC 61347-2-7, marked with EL-T G: internally-lit safety sign |
Step 3a: Mounting on Track
ON THE TOP Start Track: Instructions for mounting the luminaire onto a start track.
? Refer to TEC2 pages 10-13 for further details.
Wiring Diagrams:
Two main wiring configurations are shown, indicated by '=' and '≠' symbols, relating to terminal block connections.
Configuration '=': Shows terminal blocks L1, L2, L3, EL1, EL2 connected.
Configuration '≠': Shows terminal blocks L1, L2, L3, EN1, EN2, EL1, EL2 connected.
(3b) Diagram illustrating manipulation of terminal blocks or jumpers.
(3c) Detail showing the "CLIX" connection mechanism.
Step 4a: Mounting on Track
ON THE TOP Start Track: Further instructions for mounting on a start track.
? Refer to TEC2 pages 10-13 for further details.
Wiring Diagrams:
Similar to step 3, two configurations are shown ('=' and '≠') with different terminal block connections.
Configuration '=': Terminal blocks L1, L2, L3, EL1, EL2.
Configuration '≠': Terminal blocks L1, L2, L3, N, EN1, EN2, EL1, EL2.
(4b) to (4g) Detailed diagrams showing the connection of wires to terminal blocks and the use of the "CLIX" mechanism for various configurations, including EN1, EN2 connections.
Voltage Range: The luminaire operates on AC 220-240 V and DC 0-250 V.
Diagrams show incorrect wiring configurations marked with a cross ❌.
Step 5: Mounting and Dismounting
Mounting: Diagrams illustrate the process of attaching the luminaire to the track, including locking mechanisms (5a, 5b, 5c) and visual confirmation.
DISMOUNTING: Steps 1 and 2 show how to release the luminaire from the track.
Step 6: TEC2 Lever Lock
Description of the TEC2 lever lock mechanism for securing the luminaire.
(6a) Shows the lever lock mechanism.
(6b) Detail of the "CLIX" lever lock.
DISMOUNTING: Steps 1 and 2 show how to release the lever lock to dismount the luminaire.
OPTION: Emergency Lighting Self-contained (Battery)
⚠️ CAUTION: Lithium batteries included! OBSERVE Manufacturer's Safety Instructions!
Do not tamper with the rechargeable batteries and/or battery packs in any way. In principle, it can be assumed that lithium batteries are comparatively safe when handled properly.
Possible Hazards:
- Lithium batteries or lithium accumulators contain: Lithium or its compound (reacts violently)
- Flammable organic solvents
- Oxidising agents (fire promoters)
- Reactive halogen compounds
? Safety Data Sheet and Technical Info links are provided via QR codes for TRIDONIC (EN) and ZUMTOBEL (DE).
ExD Status LED
The ExD variant features a status LED with different indications:
LED GREEN / GRÜN:
- Status: Everything okay (Alles o. k.)
- Function test (Funktionstest)
- Service life test (Betriebsdauertest)
- Disabled (Blockiert)
Timing diagrams show different pulse patterns for these states (e.g., 1s pulses, 0.1s pulses).
LED RED / ROT:
- Status: Lamp failure (Lampenfehler)
- Charging failure (Ladefehler)
- Battery failure (Batteriefehler)
Timing diagrams show different pulse patterns for these states (e.g., 1s pulses).
A diagram shows the location of the status LED on the luminaire.
Battery Change Instructions
Reference: 00160167
For: RESCLITE PRO TEC2
If the backup does not extend to the declared duration, the battery has to be replaced.
⚠️ The electric source for safety service is not a user-serviceable item and shall only be replaced by the manufacturer service agent or a similar qualified person.
This information is provided in multiple languages, including English, German, French, Italian, Spanish, Dutch, Swedish, Finnish, Russian, Polish, and Arabic.
General Instructions for Assembly, Installation, and Operation
⚡ Caution, risk of electric shock!
The installation and commissioning of the Lighting System, as well as any modification, may only be performed by authorized personnel (qualified electrician).
The luminaire is used exclusively for lighting and must be installed in accordance with national installation regulations.
⚠️ Warning: Always ensure that luminaires and power supply units are disconnected from the mains supply during wiring and installation work. Otherwise, the LED modules may be destroyed. Hot plugging is not permitted and may result in damage to the luminaire and loss of warranty.
The manufacturer is not liable for damages resulting from improper or faulty installation, operation, or unauthorized modifications.
The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire shall be replaced.
These instructions are provided in multiple languages, including English, German, French, Italian, Spanish, Dutch, Swedish, Finnish, Russian, Polish, Chinese, and Arabic.
