Everbilt Single-Touch Latch with Strike
Item #: 1002 800 012
Model #: 9235969
Tools Required
Phillips screwdriver ?
Package Contents
A - Catch x 1
B - Plate x 1
C - Catch Screw x 4
D - Plate Screw x 1
Installation
-
Determining the Installation Location
You can attach the catch (A) on the top, bottom, or side of the cabinet.
Diagram showing a cabinet with possible attachment points for the catch (A) labeled.
-
Installing the Catch
Use the catch screws (C) to attach the catch (A) to your chosen installation location.
Diagram showing the catch (A) being attached to the cabinet with screws (C). A magnified view shows the catch mechanism.
-
Installing the Plate
Attach the plate (B) to the cabinet door using the plate screw (D). Ensure that the plate (B) is aligned with the catch (A) when you close the cabinet door.
Diagram showing the plate (B) being attached to a cabinet door with screw (D). An arrow indicates the plate's alignment with the catch (A) when the door is closed.
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product or, at the Manufacturer's option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy under this or any other warranty on the product, whether expressed or implied. For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726.
