Everbilt European Hinge for Frameless Furniture – Full Overlay Door Mounting
Item # 1002 782 610 | Model # 9235961
Use and Care Guide
This guide provides instructions for the Everbilt European Hinge for Frameless Furniture, designed for full overlay door mounting.
A diagram shows a European-style hinge for frameless furniture, designed for full overlay door mounting.
Contact Information:
Questions, problems, or missing parts? Before returning to the store, call Everbilt Customer Service:
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Thank You:
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this hinge. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Everbilt!
Safety Information
Please read and understand this manual before installing this product.
⚠️ CAUTION: Always be cautious when using power tools.
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product or, at the Manufacturer's option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy under this or any other warranty on the product, whether expressed or implied.
For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726.
Customer Service:
Questions, problems, or missing parts? Before returning to the store, call Everbilt Customer Service:
8 a.m.-6 p.m., EST, Monday-Friday
1-800-305-1726
HOMEDEPOT.COM
Pre-Installation
PLANNING INSTALLATION
Ensure all parts listed in the Package Contents section are included and that you have the listed Tools Required on hand. If any part is missing or damaged, contact customer service.
When planning your installation, ensure the hinge is oriented in its final position as shown. This hinge is intended for full overlay applications on frameless furniture with the doors positioned in front of the cabinet.
A diagram shows the correct orientation of the hinge within a cabinet frame.
When installed successfully, these hinges can open to a maximum of 95°.
A diagram illustrates hinge opening angles, showing 90° and a maximum of 95°.
TOOLS REQUIRED
- #2 Screwdriver
- Pencil or Scribe
- Ruler (in. and mm)
- Drill
- 1/16 in. Drill bit
- 35 mm boring bit (Forstner bit)
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Hinge | 2 |
| B | Mounting Plate | 2 |
| C | #5 x 5/8 in. Screw | 8 |
RECOMMENDED NUMBER OF HINGES PER DOOR SIZE
Use this diagram to determine how many hinges you will need for your door. If you are hanging a door with a mirror or a door that is wide, you will need additional hinges.
A chart illustrates hinge recommendations based on door height and weight:
- 2 hinges for doors up to 3 ft (≤ 17 lbs / ≤ 7.7 kg)
- 3 hinges for doors up to 5.2 ft (≤ 30 lbs / ≤ 13.7 kg)
- 4 hinges for doors up to 6.5 ft (≤ 39 lbs / ≤ 17.7 kg)
- 5 hinges for doors up to 7.8 ft (≤ 48.5 lbs / ≤ 22 kg)
Installation
Step 1: Pre-drilling the installation holes
Use a pencil and tape measure to measure and mark the installation locations as shown in the diagrams. Then use a 1/16 in. drill bit to drill the cabinet holes and a 1-3/8 in. (35 mm) boring bit to drill the door hole. Ensure the door hole is no deeper than 15/35 in. (12 mm). Do not drill through either the door face or the cabinet.
Diagrams show the drilling process. One shows a drill bit creating a 1-3/8 inch (35 mm) hole in a door edge. Another diagram illustrates measurements for drilling into the door edge (1-3/8 inch diameter) and the cabinet edge (1-1/4 inch and 3/16 inch hole positions relative to the edge).
Step 2: Installing the hinges to the door
Insert each hinge (A) into the pre-drilled holes in the door and secure using two screws (C) for each hinge (A).
A diagram shows hinge (A) being inserted into the pre-drilled holes on the door edge, with screws (C) being used to secure it.
Step 3: Installing the mounting plates to the cabinet
Align the mounting plates (B) to the pre-drilled holes and fasten with two screws (C) for each mounting plate (B).
A diagram shows mounting plates (B) being attached to the cabinet with screws (C), indicating measurements of 1-1/4 inch (32 mm) and 1-7/16 inch (37 mm) from the cabinet edge.
Step 4: Installing the door to the cabinet
Open the hinges (A) to the fully-extended position. Slide each hinge arm (A) to the mounting plates (B) and tighten the screw (1) on each plate (B) to secure in place.
A diagram illustrates the hinge arm (A) being slid onto the mounting plate (B) and secured with screw (1).
Step 5: Adjusting the door
Height Adjustment: Loosen the top mounting screw (1) to adjust the door up or down. A diagram shows adjustment screw (1) and an arrow indicating vertical movement.
Overlay Adjustment: Turn the adjustment screw (2) to adjust the door overlay. A diagram shows adjustment screw (2) and an arrow indicating horizontal movement.
Depth Adjustment: Turn the eccentric screw (3) to adjust the distance of the doors from the cabinet. A diagram shows eccentric screw (3) and an arrow indicating in/out movement.
