Safety Information
WARNING
For more secure application mounting to wall stud is recommended. Ensure mounting is stable and strong enough to support intended weight. If mounting to surfaces other than wood, use appropriate hardware. Hollow wall installation is not recommended.
Tools Required
- [power drill]
- [stud finder]
- [tape measure]
- [rubber mallet]
- [phillips screwdriver]
- [pencil]
- [level]
Installation Hardware
Brackets, shelves and hardware are sold separately
| Description | Quantity | Upright Length | |||
|---|---|---|---|---|---|
| Screw Qty | 24 in. | 36 in. | 46/48 in. | 68 in. | |
| #8 2 in. Screws | 3 | 4 | 5 | 7 | |
Installation
1 LOCATING WALL STUD
Mark locations on the wall studs at the desired height.
Use a level to ensure the holes are even horizontally.
Diagram Description: Shows a wall with vertical lines indicating studs. A tape measure indicates 16 inches between studs. A level is shown horizontally across potential mounting points.
2 SECURE 1ST UPRIGHT
Secure 1st upright to wall studs using #8 2 in. screws.
Diagram Description: Illustrates an upright bracket being attached vertically to a wall stud using screws.
3 LEVEL THE NEXT UPRIGHT HORIZONTALLY
Mark holes. Max spacing 16 in. from center to center of upright.
Repeat step 2 to secure 2nd upright to wall studs or drywall.
Diagram Description: Shows two upright brackets mounted on a wall. A tape measure indicates a maximum spacing of 16 inches between them. A level is shown to ensure horizontal alignment.
4 TAP THE BRACKET
Place the bracket horizontally into the upright and tap it tight with rubber mallet.
Confirm the bracket is at the same height on each upright to ensure the shelf will be level once installed.
Diagram Description: Depicts a shelf bracket being inserted into an upright slot and tapped into place with a rubber mallet.
5 ADDING THE SHELVES
Check that all brackets are level and place the shelf onto them.
Secure the shelves to the brackets.
Diagram Description: Shows shelves being placed onto the installed brackets. The brackets are confirmed to be level.
