Installation Guide for EVERBILT models including: 9235951, 9235951 Soft Close Frameless Inset 110 Degree Hinge, Soft Close Frameless Inset 110 Degree Hinge, Close Frameless Inset 110 Degree Hinge, Frameless Inset 110 Degree Hinge, Inset 110 Degree Hinge, 110 Degree Hinge
Everbilt Frameless Soft Close Nickel Inset Cabinet Hinges (1-Pair) 9235951 - The Home Depot
File Info : application/pdf, 7 Pages, 1.27MB
DocumentDocumentItem # 1002 782 624 Model # 9235951 INSTALLATION GUIDE SOFT CLOSE FRAMELESS INSET 110° HINGE Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 HOMEDEPOT.COM We appreciate the trust and confidence you have placed in Everbilt through the purchase of this hinge. We Strive to continually create quality Product designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Everbilt! Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information Please read and understand this manual before installing this product. Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Recommended Number of Hinges Per Door Size. . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CAUTION: Always be cautious when using power tools. Warranty Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product or, at the Manufacturer's option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy under this or any other warranty on the product, whether expressed or implied. For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726. 2 Pre-Installation PLANNING INSTALLATION Ensure all parts listed in the Package Contents section are included and that you have the listed Tools Required on hand. If any part is missing or damaged, contact customer service. When planning your installation, ensure the hinge is oriented in its final position as shown. This hinge is intended for inset applications on frameless furniture with the doors positioned inside the front of the cabinet. Side Panel Door When installed successfully, these hinges can open to a maximum of 110°. 90° TOOLS REQUIRED 110° #2 Screwdriver Pencil or Scribe Ruler (in. and mm) 35 mm boring Drill bit (Forstner bit) 3 HOMEDEPOT.COM Please contact 1-800-305-1726 for further assistance. Pre-Installation (continued) PACKAGE CONTENTS C A D B Part Description A Hinge B Frameless Mounting Plate C #5 x 5/8 in. Wood Screw D #9 x 5/8 in. Wood Screw Quantity 2 2 4 4 RECOMMENDED NUMBER OF HINGES PER DOOR SIZE Use this diagram to determine how many hinges you will need for your door. If you are hanging a door with a mirror or a door that is wide, you will need additional hinges. 5x 4x 3x 2x 3 ft 5.2 ft 6.5 ft 7.8 ft 9-13 lbs 14-26 lbs 27-37 lbs 38-50 lbs 4 Installation 1 Pre-drilling the installation holes 2 Installing the hinges to the door Use a pencil and ruler to measure and mark the installation locations as this diagram shows. Use a 1-3/8 in. (35 mm) boring bit to drill the door hole. Ensure the door hole is a minimum of 1/2" (12.7 mm). Do not drill through either the door face or the cabinet. Insert each hinge cup (A) into the pre-drilled hole in the door and secure using two 5/8" wood screws (C) for each hinge (A). A 7/8 in. (21.5 mm) Door Thickness X 1-29/64 in. (37 mm) Edge of Door C 3a Installing the mounting plates to the cabinet Align the mounting plates (B) to the marked position and fasten with two screws. (D) B 1/2 in ø1-29/64 in. (37 mm) D (13 mm) 7/8 in. Deep (21.5 mm) 5 HOMEDEPOT.COM Please contact 1-800-305-1726 for further assistance. Installation (continued) 3b Diagram for mounting plate screw placement 4 Installing the door to the cabinet Open the hinges (A) to the fully-extended position. Connet the hinge arm (A) to the mounting plates (B) and press the hinge arm (X) down until they snap to the plates. 5/16" 5/16" 1 7/16 in. (35 mm) Door Cabinet 5 Adjusting the door Height Adjustment: Loosen the top mounting screw (1) to adjust the door up or down. B A X 1 Overlay Adjustment: Turn the adjustment screw (2) to adjust the door overlay. Depth Adjustment: Turn the eccentric screw (3) to adjust the distance of the doors from the cabinet. 2 3 6 Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 HOMEDEPOT.COM Retain this manual for future use.