ACTIVESHOP Exo Power Max Nail Drill

Product Overview

The ACTIVESHOP Exo Power Max is an electric milling machine designed for professional manicure and pedicure use. The unit features an ergonomic design and user-friendly controls.

Importer: ACTIVESHOP Z O.O., ul. Graniczna 8b, bud. DC2A, 54-610 Wrocław, Poland. Website: www.activeshop.com.pl Rev. A/05/2024. CE certified.

[Image description: A white electric nail drill unit with a handpiece, power cord, and foot switch. The base unit includes a speed control dial, direction change button, and indicator lights.]

Product Features

• Innovative design, easy to use.
• Built-in automatic timer switch to prevent forgetting to turn off the device and avoid overloading the drill.
• Tactile button allows control of rotation direction (clockwise and counter-clockwise).

The Exo Power Max milling machine is ideal for both manicure and pedicure. Its 60 W power output ensures efficient and effective operation, even for extended periods. It is constructed with high-quality components and materials selected by industry experts.

Package Contents

Rotation Speed Information

This chart provides a general guideline for the maximum rotation speed (RPM) of conventional milling bits. The permissible rotation speeds may vary slightly depending on the materials being worked on or the type of bits used.

[Chart description: The chart displays recommended maximum rotation speeds in RPM (ranging from 0 to 50,000 RPM) against different drill bit diameters (from less than Ø2 mm up to Ø28-40 mm). It indicates that larger diameter bits generally require lower RPMs.]

Components

Assembly and Preparation for Use

1. Rotate the safety ring on the cutting tool holder half a turn clockwise.
2. Insert the cutting tool (drill bit) fully into the holder.
3. Rotate the locking ring on the cutting tool holder in the opposite direction to secure the bit, then place the handpiece onto the handpiece holder.
4. Connect the power cord, foot switch cable, and handpiece cable to their respective output ports on the back of the base unit.

[Diagram description: Visual guide showing the steps for inserting a drill bit into the handpiece and connecting the cables to the base unit.]

User Operation

1. Select a suitable drill bit from the set and insert it into the handpiece. Other drill bits can be stored in the designated holders on the base unit for easy access and replacement.
2. Turn the speed control knob clockwise. The drill bit will begin to rotate. The speed increases as the knob is turned further, reaching maximum speed when the knob is fully turned.
3. To change the rotation direction, press the tactile direction change button. The drill bit will stop briefly before resuming rotation in the new direction. The indicator lights show the current rotation direction.
4. Slowly bring the rotating bit close to the nail to be treated. Wear safety glasses to protect your eyes from dust.
5. While the drill is in operation, pressing the foot switch will stop the rotation. Pressing it again will restart the drill at the previously set speed.

[Diagram description: Close-up of the speed control knob labeled MIN and MAX. Another diagram shows the direction change button on the base unit.]

Safety Features

• The device incorporates special protection against overvoltage and overcurrent.
• The handpiece automatically stops operation after 15 minutes of continuous use without any setting changes (e.g., speed adjustments, stopping rotation, direction changes) to prevent accidental continuous operation and overheating.
• In case of accidental blockage or overload, the handpiece will automatically stop, and both LEDs on the main unit will flash with an audible warning tone. To resume operation after a fault, turn the speed knob from MAX to MIN or unplug and restart the device after a short pause.

Warnings

• Do not use non-original parts.
• Do not discard the machine improperly.
• Avoid overloading the milling machine or using it at maximum speed for extended periods, as this can lead to damage.
• Replace worn drill bits with new ones; do not use excessively worn bits.
• Keep the appliance out of reach of children.
• Maintain the cutting tool in a clean condition.
• Do not apply excessive pressure to the cutting tools.
• Ensure the voltage of the machine matches the voltage of the power outlet. Do not change the voltage selector switch to any setting other than 220 Volts.
• Keep away from water and fire sources.
• Do not use the appliance in a bathroom.
• Wear safety glasses to prevent dust from entering your eyes.
• Unplug the power supply after finishing work for safety.

Troubleshooting

Refer to the table below for common issues and their solutions.

Technical Data

Safety Measures

• This device is professional equipment for beauty salons. Operation by qualified personnel is recommended to avoid undesirable effects.
• Do not disassemble or use the device for purposes other than those specified in this manual. All service and repairs must be performed by an authorized ACTIVESHOP SP. Z O.O. service technician.
• Avoid operating the appliance near liquids, in wet areas, or with wet hands to prevent liquid ingress.
• Immediately unplug the device and contact an authorized ACTIVESHOP SP. Z O.O. service center if: (a) liquid has entered the device, (b) the device emits unusual smells, smoke, or sounds, (c) the power cord is damaged, or (d) the device has been dropped or its casing is damaged.
• Do not place objects on cables or install the unit where the power cord can be stepped on.
• Always unplug the power cord after finishing work.
• Do not insert objects into the device's openings. If a foreign object enters, unplug the device and contact the distributor or manufacturer.
• Do not place the device on unstable surfaces or vehicles, as it may be damaged if dropped.

Important Notes and Precautions

To ensure the specified service life, observe a one-minute interval between switching the power button on and off.

The power supply must match the specifications on the nameplate; otherwise, there is a risk of malfunction, damage, or burnout.

Attention:

• In case of power cord damage or other malfunctions, contact an authorized service center to avoid danger.
• This appliance may be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience, provided they are supervised or instructed in safe use and understand the risks.
• The equipment is not a toy; do not allow children to play with it.
• Do not leave the appliance unattended when children or inexperienced persons are nearby.
• This is an electrical appliance, not a toy. Improper use can pose health risks or be fatal; store it in a place inaccessible to children.

Disposal of the Appliance

Dispose of waste electrical appliances, accessories, and packaging at recycling centers according to environmental regulations. Do not dispose of electrical appliances with household waste. Follow local disposal guidelines. In accordance with Directive 2012/19/EU, used electrical appliances must be collected separately and handed over to designated collection points for electronic and electrical waste. Old appliances contain recyclable components and must be sent for processing to authorized collection points, including ACTIVESHOP Ltd.

Storage and Transportation

Transport the device within a temperature range of -20 °C to +50 °C, preferably in its original packaging. Store in a well-ventilated area with humidity not exceeding 75%. Operating temperature: +10 °C to +40 °C. Avoid dropping, throwing, mechanical shocks, or exposure to atmospheric influences during storage and transportation.