ACTIVESHOP EXO MILLER SX5 (DR-2028) & SX7 (DR-2034)

Product Overview

The ACTIVESHOP EXO MILLER is a professional electric nail drill designed for use in beauty salons. It is available in two models: SX5 (DR-2028) and SX7 (DR-2034). The device offers variable speed control and is suitable for various manicure and pedicure procedures.

Technical Specifications

Package Contents

• Milling machine base
• Handpiece
• Power Supply
• Ceramic Cutter

Machine Construction

Operating Instructions

1. Connect the base to the power supply using the provided adapter.
2. Connect the handpiece to the handpiece socket on the base.
3. Open the chuck by turning the handle and insert the cutter into the handpiece. Close the chuck securely.
4. Turn the machine ON using the power switch.
5. Adjust the speed using the control dial. Turning the dial clockwise increases the speed.

Remember:

• Always turn the drill OFF when not in use.
• Hold the handpiece as shown in the diagram (referring to the image on page 3).
• When the drill is not in use, place the handpiece in its holder.
• Do not exceed the speed recommended by the cutter manufacturer.

Cutter Diameter vs. Max RPM:

Important Notes

• The chuck mechanism may offer greater resistance when a cutter is not inserted. This is normal and due to the handpiece design.
• It is forbidden to use a cutter without a suitable cutter or shank inserted into the handpiece chuck.
• Use only original accessories and parts with ACTIVESHOP products.
• When connecting the plug, do not touch its metal parts.
• Do not use oil to clean the handpiece.
• The handpiece must not be damaged. The device can be damaged if dropped or struck due to its construction. If the handpiece is dropped, ensure all functions are correct before starting the device.
• Use cutters recommended by the manufacturer. Do not use cutters with bent tips.
• Handle all parts with care.
• Keep the work area and the machine, especially the handpiece, clean.
• Operate the machine following safety precautions.
• If the handpiece, cable, plug, or socket is damaged, replace the damaged component before further use.
• When pulling the plug, do not pull the cable.
• Do not place the device near flammable materials.
• Do not allow children to use the device.
• Use a dust mask and safety goggles, and ensure the room is well-ventilated.
• When using the handpiece at high speed, first check its operation and vibration level at a lower speed.
• When the machine is not in use, disconnect it from the power supply.
• Before turning off the power, turn the potentiometer counter-clockwise to the minimum position, then turn off the device by switching the power switch to the "O" position.
• Do not pull out the main power plug while the device is operating.

CAUTION! Opening the handle during operation will damage the machine. Changing cutters while the motor is running will damage the clutch. Damage of this nature is not covered by warranty. Cutters must be changed with the handle in the open (unlocked) position, and the milling machine must be turned OFF at that time.

Safety Measures

• This is a professional device intended for use in beauty salons. Use by qualified cosmetic personnel only helps prevent undesirable consequences during treatment.
• Do not disassemble the device or attempt to use it for purposes other than those specified in this manual. All maintenance and repair work must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
• Do not install or use the device near liquids, in wet areas, or with wet hands, to prevent liquid from entering the device.
• In the following cases, immediately unplug the device and contact an authorized service center provided by ACTIVESHOP Ltd.:
  • (a) liquid has entered the device,
  • (b) the device emits strange odors, smoke, or makes unusual noises,
  • (c) the power cord is damaged,
  • (d) the device has been dropped or its casing is damaged.
• Do not place any objects on the cords. Do not place the device in a location where someone might step on the power cord.
• For safety, unplug the power cord every time you finish working with the device.
• Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the device and contact the dealer or manufacturer.
• Do not place the device on an unstable cart, shelf, or vehicle, as it may be damaged if it falls.
• To ensure the device's long lifespan, it is recommended to wait one minute between turning the power button ON and OFF (and vice versa).
• The power supply must comply with the specifications on the data plate. Otherwise, there is a risk that the device will not work correctly, will be damaged, or may even burn out.

ATTENTION:

• In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid danger.
• This device can be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they are supervised or instructed on the safe use of the device and understand the associated hazards.
• Devices are not intended for children to play with. Do not allow children to play with the device.
• Do not leave the device unattended if children or persons unfamiliar with its use are nearby.
• This electrical device is not a toy. Improper use or contact with the electrical device can endanger health or cause death; therefore, the device must be used and stored out of the reach of children.

Device Disposal

Dispose of used electrical equipment, accessories, and packaging at recycling centers in accordance with environmental protection principles. Electrical equipment must not be disposed of in household waste containers. Follow the regulations for the disposal of this type of equipment. In accordance with Directive 2012/19/EU concerning waste electrical and electronic equipment, used electrical equipment must be collected separately and handed over to electronic and electrical waste collection points. Discarded and old equipment contains fully recyclable components and should therefore be returned for recycling. They should be handed over to appropriate collection points and also to ACTIVESHOP OÜ.

Storage and Transport

The device must be transported at temperatures from -20 °C to +50 °C, only in its original packaging. Store the device in a well-ventilated room with relative humidity not exceeding 75%. The operating temperature is +10 °C to +40 °C. During storage and transport, do not drop or let the device fall, and do not expose it to mechanical shocks or weather conditions.

Contact Information

For service and support, please contact:

ACTIVESHOP Sp. z o.o.
ul. Graniczna 8b, bud. DC2A
54-610 Wrocław, Poland
Website: www.activeshop.com.pl