FAQ
What is the story and technology behind "Never Loses Suction"?
Other vacuums use filters or bags that clog and lose suction. Shark Navigator uses patented cyclonic technology that never loses suction. It cleans the last room as well as the first.
Why is the Shark Navigator Lift-Away better than traditional vacuums?
The Shark Navigator Lift-Away offers a superior cleaning experience with true Never Loses Suction technology in an ultra lightweight and steerable upright vacuum, at an affordable price. It features a unique detachable canister and an ultra-quiet system for cleaning anywhere, anytime. Premium tools include an interchangeable hard floor nozzle for large and small particles and a variety of tools for superior pet hair pickup.
How often should I wash the filters?
For optimal performance, wash pre-motor foam and felt filters every 3 months under normal use. Wash post-motor foam and felt filters every 12 months under normal use. For the post-motor HEPA filter (infomercial version only), wash and air dry once every 2 years or as needed.
How do I wash the filters?
Rinse filters under running tap water until the water runs clear. Squeeze filters and let air dry for 24 hours before replacing. Do not wash in a dishwasher or washing machine.
What is the weight of the vacuum?
Only 12.8 lbs.
What is the vacuum made of?
The Shark Navigator Lift-Away is produced with a combination of durable ABS and PP plastics, along with some metal and rubber components.
How do I remove the handle to clean "above floors"?
Remove the cord from the cord clip first. Then, press the extension wand release button halfway down the backbone of the vacuum. Gently pull up on the handle to remove the wand. Add the desired tool to the end of the wand and begin cleaning.
How do I remove the extension wand to clean "above floors"?
Press the handle release button, gently pull up on the handle to remove it from the extension wand. Add the desired tool and begin cleaning.
How do I detach the canister to clean "above floors"?
From upright vacuum mode, first remove the cord from the cord clip. Depress the floor nozzle release button on the bottom side of the canister. Gently step on the floor nozzle while holding the handle on top of the canister and lift it away. Next, remove the handle or handle with extension wand. Add the desired tool onto the end and begin cleaning. Hold the handle in one hand while carrying the detachable canister with the other hand.
How do I use the detachable canister mode to clean floors?
This mode offers a lightweight alternative to vacuuming floors in traditional upright mode. It provides flexibility to quickly and easily vacuum under low clearance furniture. Separate the detachable canister from the floor nozzle, remove the extension wand from the vacuum, and then re-attach the wand directly to the desired floor nozzle. Vacuum the floors while carrying the detachable canister.
How do I attach/remove the floor nozzle?
Place the floor nozzle on a level surface. Align the tube of the floor nozzle with the tube on the detachable canister and lower until the two pieces click into place. When attaching the motorized floor brush, ensure the latching mechanism is fully locked to ensure electrical connection.
What is suction release and when should I adjust it?
Due to the vacuum's strong suction, the suction release feature allows adjustment for optimal push and pull on high pile carpets and area rugs. If a small area rug is being pulled up, turn the suction release collar at the base of the handle to the right to release excess air, lowering suction. This makes it easier to maneuver while still cleaning effectively. For maximum suction or when using the turbo brush, turn the suction release collar fully to the left. It is recommended for small area rugs and delicate fabrics.
Which tools store on board the Shark Navigator Lift-Away?
The Shark Navigator Lift-Away is designed to hold the short crevice tool and dusting brush on board for quick access. A specially designed accessory tool holder keeps these on the extension wand.
