Lexon Minut LR154 Alarm Clock

Overview

The Lexon Minut LR154 is a digital alarm clock designed by Manuela Simonelli & Andrea Quaglio.

Device Components (Diagram A & B)

The device features a clear LED display showing the time, alarm status, and battery level. Key interaction points include:

• [touch surface]: Tap once to snooze or turn on the display, double tap to stop the alarm.
• [display]: Shows time, time setting mode, alarm setting mode, brightness mode, battery indicator, alarm ON status, and AM/PM indicator.
• [alarm setting]: Button for setting the alarm.
• [time setting]: Button for setting the time.
• [brightness setting]: Button for adjusting display brightness.
• [-] [+]: Adjustment keys for time, alarm, or brightness.
• [power]: Power ON/OFF key.
• [USB-C port]: Located at the back for charging.

Charging Instructions

It is recommended to fully charge the battery before first use.

1. Connect the provided USB Type-C cable to the device's charging port.
2. Connect the USB end to a powered-on computer or a 5V USB power adapter (not included).
3. A charging icon will appear on the LCD screen. Full charge takes approximately 3 hours.

A flashing battery icon indicates low battery when not plugged in. The LED display stays on permanently when plugged in; otherwise, it activates upon touching the top surface for 5 seconds, dims for 15 seconds, then enters standby.

Operations & Use

First Time Setting

1. Press and hold the [power] key for 3 seconds to turn on.
2. Select time format (12h/24h) using [-]/[+] keys, then confirm with [time setting].
3. Adjust HOUR using [-]/[+], confirm with [time setting].
4. Adjust MINUTES using [-]/[+], confirm with [time setting].

Night Mode

Night mode is active only when plugged in. Press the [brightness setting] key once to enable/disable. When enabled, the brightness icon is displayed. The screen turns black from 10:00 PM to 8:00 AM for a better sleeping environment.

Normal Mode (Time Setting)

1. Press and hold the [time setting] key for 2 seconds to enter time setting mode.
2. Select time format (12h/24h) using [-]/[+], confirm with [time setting].
3. Adjust HOUR using [-]/[+], confirm with [time setting].
4. Adjust MINUTES using [-]/[+], confirm with [time setting].

Alarm Setting

1. Press and hold the [alarm setting] key for 2 seconds to enter alarm setting mode.
2. Adjust HOUR using [-]/[+], confirm with [alarm setting].
3. Adjust MINUTES using [-]/[+], confirm with [alarm setting].

If no operation occurs for 10 seconds, the device returns to time display.

Alarm Actions

• Stop Alarm (Diagram C): When the alarm sounds, [double tap] the top surface or press any button.
• Snooze Alarm (Diagram D): Gently [single tap] the top surface once. The alarm will sound again after 6 minutes.
• Check Alarm Time: Press the [alarm setting] key once.
• Disable Alarm: Press the [alarm setting] key once to view the alarm time, press again to disable. The alarm icon will disappear. Repeat to re-enable.

Brightness Setting

1. Press and hold the [brightness setting] key to enter brightness setting mode.
2. Adjust brightness level using [-]/[+], confirm with [brightness setting].

Other Operations

• Backlight: Tap the top surface at night to illuminate the screen.
• Low Battery Alert: The last battery bar flashes when the battery level drops below 10%. Plug in to charge.
• Reset Mode: Press and hold the [-] and [+] keys simultaneously until a beep is heard to reset the device.

Safety Information

• Read all instructions before operating.
• Retain instructions for future reference.
• Do not use near water or moisture.
• Keep away from heat sources.
• Connect only to specified power sources.

Product Specifications

• Dimensions: 2.36 x 1.57 x 0.79" / 6.5 x 4.5 x 2.5 cm
• Weight: 0.11 lb / 50 gr
• Material: ABS/Aluminium
• Battery Capacity: 900 mAh
• Charging Time: 3 hours
• Charging System: Rechargeable via USB Type-C cable (included)
• Input: DC 5V
• Frequency Band: 1700-2700 Hz
• Battery Voltage: 3.7V
• Normal Usage Time: Up to 6 months (varies with settings and usage)
• Warranty: 1 year international

Compliance Information

This device complies with relevant EU directives (2014/30/EU & 2011/65/EU) and UK harmonisation legislation. It also complies with FCC Rules Part 15 and Canadian license-exempt RSSs. Disposal should follow local regulations for electronic waste.

Manufacturer: Lexon, 125 Avenue des Champs-Élysées - 75008 Paris - FRANCE.

Assembled in China.

Website: lexon-design.com