Lexon LA129 MINO+ L

Design by Manuela Simonelli & Andrea Quaglio

Product Components

(1) Speaker
(2) Microphone (Hands-free phone call)
(3) Multi-Function Button (MFB button)
(4) USB Type-C port
(5) Light indicator
(6) Wireless charging receiver

Charging

Charge with USB cable:

Plug the provided USB Type-C cable into the charging port of the Mino+ L.
Plug the USB end of the cable into any computer or any DC 5V-1A power supply charger.

Charge with Wireless Charger:

Mino+ L has a built-in wireless charging receiver. You can charge the battery by using a wireless charger.

Place Mino+ L at the center of the wireless charger.
Disconnect the device once the battery has been fully charged.

Pairing / Connecting

Bluetooth® Pairing

Pair 1 MINO+ L

Turn on Mino+ L by pressing the "MFB" button for a few seconds.
When the speaker is in pairing mode, it will emit a sound as notification and the Blue light indicator will start flashing rapidly.
Go into the Bluetooth® settings of your smartphone and make sure to switch on the Bluetooth® mode.
Scroll to "Other or new Devices" and look for your new Bluetooth® speaker's "LEXON MINO+ L".
Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.

Note: Once paired and connected, the Bluetooth® speaker will automatically connect to your device whenever you turn the speaker on again, provided the device is in range.

Pair 2 MINO+ L (True Wireless Stereo technology)

Turn on both Mino+ L by pressing the "MFB" button for a few seconds.
Before connecting both speakers to your smartphone, double-press the "MFB" button of one Mino+ L until you hear a continuous "du-du-du" sound. This Mino+ L will act as the host device and will actively search for the second Mino+ L. A sound will confirm that both Mino+ L are successfully paired. The "LEXON MINO+ L" speakers can automatically pair together thanks to TWS technology.
Turn on the Bluetooth® of your smartphone, search for the Bluetooth® speaker "LEXON MINO+ L".
Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.

Note: Once paired and connected, the Bluetooth® speaker will automatically connect to your device whenever you turn the speaker on again, provided the device is in range.

Light Status Indicator

Operation Mode	Light (5)
Power supply	Steady Red light
Power On (Long press MFB button)	Flashing Blue light and emits a sound
Power Off (Long press MFB Button)	Emits a sound
Enter in pairing mode	Blue light flashing quickly
Bluetooth® device connected with phone	Steady Blue light and emits a sound
Playing Music	Blue light flashing slowly

If the indicator light does not work as described above, unplug the charger from MINO+ L and reconnect it.

Bluetooth® Hands-Free Operations

Answer/Hang up a call: Press the "MFB" button once.
Reject a call: Long press the "MFB" button.

Selfie Control Function

Make sure that your "LEXON MINO+ L" is paired with your smartphone.
Open the native camera of your smartphone and position your phone on a stable surface.
Ensure that your speaker is in range and press the "MFB" button to take a picture.

How to Pair with Another Phone

To pair your speaker with another phone, make sure that your Bluetooth® speaker is ON and short press the "MFB" button twice.
Disconnect or forget "LEXON MINO+ L" directly from your smartphone's Bluetooth® settings first.
Then, perform a new pairing procedure with another smartphone.

Safety Precautions

Read all the instructions before using the device:

Protect the speaker from heat sources such as radiators, heaters, air ducts, and direct sunlight.
Avoid contact with liquids; keep away from corrosive liquids.
Do not hit the product severely, or insert any conductive objects into the speaker or charging port.
Do not repair the speaker yourself; seek professional service.
Avoid impacts.
Do not expose Mino+ L to water during charging, as this could permanently damage the speaker or power source.

Product Specifications

Material: Aluminium/ABS
Weight: 0.54 lb / 245 g
Dimensions: Ø3.6 x 1.18" / Ø9.2 x 3 cm
Water resistance: IPX4 - protects against everyday splashes and spills
Speaker power: 5W
Bluetooth® version: 5.1
Bluetooth® range: 10 m
Battery voltage: 3.7 V
Frequency range: 2402MHz-2480MHz
Max. Power output: +4 dBm
Normal usage time: 5 h
Input port: DC 5V-1A
Battery type: Li-polymer
Battery capacity: 900 mAh
Charging system: USB Type-C or Supports wireless charging
Charging time (USB Type-C): approx. 2.5h
Wireless input: 5W
Charging time (wirelessly): approx. 3h
Operating temperature: -10°C to +50°C
International warranty: 1 year

Regulatory Information

European Union CE Directive

LEXON hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the RE Directives 2014/53/EU. The complete declaration of conformity is available at: https://www.lexon-design.com/assets/certifications-ce-minoplusl.pdf

UK Conformity Assessment

The object described above is in conformity with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The original UK declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ukca-minoplusl.pdf

RF Specification:

Bluetooth: 2402-2480 MHz
WPT: 110 kHz-148 kHz (RX)
BT transmitter power: -0.61 dbm

Disposal and Recycling Information

After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA - FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-0003.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.