Mina Sunrise

Introduction

The Lexon Mina Sunrise LR153 is a versatile wake-up light and alarm clock designed to enhance your sleep and waking experience. It combines a soothing light therapy lamp with functional alarm clock features, promoting natural sleep cycles and gentle awakenings.

In the Box

• 1x Mina Sunrise
• 1x USB Type-C charging cable
• 1x User manual

Product Overview

The Mina Sunrise features a sleek design with intuitive controls:

• 1. Push-button: Press once to turn ON the lamp. Press and hold to enable sunset mode. Press to stop the alarm when it sounds.
• 2. Lamp: The main light source.
• 3. Touch area (Metallic surface): Touch to light up the screen. Touch to snooze when the alarm sounds.
• 4. Date: Displays the current date.
• 5. Time: Displays the current time.
• 6. Alarm time: Displays the set alarm time.
• 7. Alarm ON & Alarm sound ON indicator: Shows when the alarm is active and set to sound.
• 8. Alarm ON & Sunrise mode ON indicator: Shows when the alarm is active and set to use the sunrise simulation.
• 9. Night mode indicator: Works only when the device is plugged into a power source. Press the Time setting button (14) once to turn ON/OFF night mode.
• 10. Battery & Charging indicator: Shows battery status and charging progress.
• 11. USB-C port: For charging the device and battery status indication.
• 12. Minus button (-): Press to adjust settings or decrease lamp brightness.
• 13. Power button: Press and hold to turn the device ON/OFF.
• 14. Time setting button: Press and hold to enter Time setting mode.
• 15. Alarm setting button: Press and hold to enter Alarm setting mode. Press once to enable/disable the alarm.
• 16. Plus button (+): Press to adjust settings or increase lamp brightness.
• 17. Screen brightness setting button: Press and hold to enter the screen brightness setting mode.

Usage Scenarios

Powering the Device:

• Scenario A (Plugged In): To maintain the LED screen on permanently, plug the Mina Sunrise into a power source using a 5V DC power adapter (not supplied) and the supplied USB-C cable.
• Scenario B (Battery Powered): Mina Sunrise has a built-in battery for operation without being plugged in. When not plugged in, the LED display is ON for 5 seconds, then dims for 15 seconds before entering standby mode. Simply touch the metallic surface to turn ON the screen. The battery icon flashes when the battery is low. Full charging takes approximately 5 hours.

Fall Asleep Faster (Sunset Mode)

The Mina Sunrise lamp facilitates falling asleep with its soothing orange light that gradually transitions to red. The red light wavelengths stimulate melatonin production, a natural hormone that promotes better sleep. This mode helps the brain release more melatonin at nightfall.

Wake Up Naturally (Sunrise Mode)

The lamp provides a gentle wake-up call and a sense of well-being. The blue light emitted plays a key role in regulating the body's circadian rhythm. This light decreases melatonin production, making you feel awake and ready for the day. The light intensity gradually increases, simulating a warm white sunrise.

Settings and Adjustments

Time and Date Setting

1. Press and hold the Time setting button (14). The time format display appears.
2. Press the Minus button (-) or Plus button (+) to select the time format (12h/24h), then press the Time setting button (14) to confirm.
3. The HOUR digit flashes. Press the Minus button (-) or Plus button (+) to adjust the HOUR, then press the Time setting button (14) to confirm.
4. The MINUTES digit flashes. Press the Minus button (-) or Plus button (+) to adjust the MINUTES, then press the Time setting button (14) to confirm.
5. The MONTH digit flashes. Press the Minus button (-) or Plus button (+) to adjust the MONTH, then press the Time setting button (14) to confirm. The date format is set based on the selected time format.
6. The DAY digit flashes. Press the Minus button (-) or Plus button (+) to adjust the DAY, then press the Time setting button (14) to confirm.

Note: If no operation is performed for 10 seconds during time/date setting, the unit automatically returns to the time display.

Alarm Setting

Full Setting:

1. Press and hold the Alarm setting button (15). The HOUR digit flashes.
2. Press the Minus button (-) or Plus button (+) to adjust the HOUR, then press the Alarm setting button (15) to confirm.
3. The MINUTES digit flashes. Press the Minus button (-) or Plus button (+) to adjust the MINUTES, then press the Alarm setting button (15) to confirm.
4. To set the alarm clock mode, press the Minus button (-) or Plus button (+) to select between the following modes and press the Alarm setting button (15) to confirm:
   • Mode 1: Wake-up by light & sound ([alarm icon] & [light icon] appear on-screen)
   • Mode 2: Wake-up light only ([light icon] appears on-screen)
   • Mode 3: Sound only ([alarm icon] appears on-screen)
5. If you selected Mode 1 or Mode 3, press the Minus button (-) or Plus button (+) to choose from the 5 available alarm tones. Press the Alarm setting button (15) to confirm.
6. Press the Minus button (-) or Plus button (+) to set the volume. Press the Alarm setting button (15) to confirm.

Alarm Time Setting Only:

1. Double press the Alarm setting button (15). The HOUR digit flashes.
2. Press the Minus button (-) or Plus button (+) to adjust the HOUR, then press the Alarm setting button (15) to confirm.
3. The MINUTES digit flashes. Press the Minus button (-) or Plus button (+) to adjust the MINUTES, then press the Alarm setting button (15) to confirm.

Snooze: Touch the metallic surface (3) when the alarm sounds. The alarm icon will continue to flash, indicating snooze is active. The alarm will sound again after 6 minutes.

Turn Off Alarm: Press the top of the lamp (1) once when the alarm sounds.

Disable Alarm Mode: Press the Alarm setting button (15) once. The [alarm icon] and/or [light icon] appear on-screen when the alarm is ON, and are not visible when the alarm is OFF.

Screen Brightness Adjustment

1. Press and hold the Screen brightness setting button (17).
2. Press the Minus button (-) or Plus button (+) to adjust the brightness, then press the Screen brightness setting button (17) to confirm.
   • SC 1: Lowest level
   • SC 2
   • SC 3
   • SC 4
   • SC 5: Highest Level
   • SC Auto: The brighter the environment, the higher the brightness level. In the dark, the brightness level gradually decreases to level 1 if the room is completely dark.

Special Modes

Sunset Mode

Press and hold the top of the lamp (1) to turn ON sunset mode. This mode lasts 30 minutes. To disable sunset mode and return to normal mode at any time, press the top of the lamp (1) once.

Night Mode

Important note: This feature only works when the device is plugged in.

The alarm clock enters night mode (black screen) from 10:00 PM to 8:00 AM, creating a better sleeping environment. To disable/enable night mode, press the Time setting button (14) once. When night mode is enabled, a [night mode icon] appears on-screen. To turn on the screen when in night mode, touch the metallic surface (3). The LED backlight will be ON for 5 seconds, then dim for 15 seconds before going into standby mode.

Lamp Features

• Press the top of the lamp (1) to turn it ON.
• There are 9 color options selectable by touching the top of the lamp.
• To adjust brightness, press the Minus button (-) or Plus button (+).
• To turn OFF the light, wait 3 seconds after color selection, then touch the surface again. The last color set will be remembered for next time.

Safety Precautions

• Respect technical specifications for charging. Never use a power adapter delivering more voltage output than indicated to avoid irreversible damage.
• Do not store the device in very hot or cold areas. Use at room temperatures is recommended.
• Do not expose the device to direct sunlight for extended periods.
• Keep the device out of reach of small children to prevent danger.
• Stop using the device immediately if it bulges, leaks, or smells, and contact the manufacturer for service.
• Do not attempt to service, repair, or disassemble the device yourself.

Product Specifications

Compliance and Declarations

European Union (CE) Directive

LEXON hereby declares that the device follows the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU.

The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-minasunrise.pdf

UK Conformity Assessment (UKCA)

The object of the declaration described above is in conformity with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206).

The original UK declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ukca-minasunrise.pdf

Disposal and Recycling Information

This symbol on the product, instruction manual, or package indicates that the product is subject to regulations regarding electrical and electronic devices. Consumers are obliged by law to return these devices at the end of their service lives to designated public collecting points or points of sale. By recycling and reusing materials, you contribute to protecting the environment.

USA - FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. If interference occurs, users are encouraged to try correcting it by reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

RF exposure statements: This equipment complies with FCC radiation exposure requirements for an uncontrolled environment. End users must follow specific operating instructions for RF exposure compliance.

Canada Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003 & ICES-005.

RF exposure statements: This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and is safe for intended operation as described in this manual.