Lexon Flip Plus LR150: User Guide
Introduction
Welcome to the user guide for the Lexon Flip Plus LR150 alarm clock. This innovative timepiece combines modern design with practical functionality, making it a stylish addition to any desk or nightstand. Designed by Lexon, known for its contemporary lifestyle products, the Flip Plus LR150 offers intuitive operation and reliable timekeeping.
Key Features
- Reversible LCD Display: The clock features a unique reversible display. Time is shown on one side, and when the alarm is set, the alarm time is visible on the other side.
- Radio Controlled Clock (RCC) Technology: The LR150 automatically synchronizes its time with atomic clock signals, ensuring perfect accuracy without manual adjustments. ⚙️
- Alarm Function: Set a daily alarm to wake you up on time. ⏰
- Snooze Function: Temporarily silence the alarm for a few extra minutes of sleep. ?
- Backlight: A gentle backlight illuminates the display, allowing you to check the time in low-light conditions. ?
- Intuitive Flip Operation: The clock activates or deactivates its display and alarm by simply flipping it over. [Flip to activate/deactivate]
Getting Started
Battery Installation
To power your Lexon Flip Plus LR150, you will need two AAA batteries (not included). Locate the battery compartment on the underside of the clock. Open the compartment cover, insert the batteries according to the polarity markings (+/-), and close the cover securely.
[Diagram: Battery compartment on the bottom of the clock showing polarity markings.]
Automatic Time Setting (RCC)
Upon inserting the batteries, the clock will automatically begin searching for the RCC signal to set the correct time. This process may take several minutes (up to 7 minutes is typical). Ensure the clock is placed in an open area, away from electronic interference, for optimal signal reception. A signal indicator may appear on the display when a connection is established. ✔️
Manual Time Setting (if needed)
If the RCC signal is weak or unavailable in your location, you can set the time manually. Press and hold the 'M' (Mode) button until the hour digits flash. Use the '+' and '-' buttons to adjust the hour. Press 'M' again to set the minutes, and use '+' and '-' to adjust. Press 'M' one final time to confirm the time.
[Diagram: Buttons on the clock for setting time: M, +, -]
Operation
Activating and Deactivating the Clock
The primary interaction with the Flip Plus LR150 is its unique flipping mechanism. To turn the clock ON (displaying the current time) and activate the alarm if set, place the clock face up. To turn the clock OFF (displaying nothing and silencing the alarm) and enter standby mode, flip the clock over so the back is facing up. [Flip clock to activate/deactivate]
Setting the Alarm
To set the alarm time:
- Press the 'AL' (Alarm) button to enter alarm setting mode. The alarm time digits will flash.
- Use the '+' and '-' buttons to adjust the desired alarm hour.
- Press the 'AL' button again to set the alarm minutes.
- Use the '+' and '-' buttons to adjust the desired alarm minutes.
- Press the 'AL' button one final time to confirm and exit alarm setting mode. An alarm icon will appear on the display when the alarm is active. ?
Using Snooze
When the alarm sounds, briefly press the 'SNOOZE' button (often located on the top or side) to activate the snooze function. The alarm will stop temporarily and sound again after a few minutes (typically 5-9 minutes). The clock will automatically return to normal time display after the snooze period.
Adjusting Backlight
The backlight can usually be activated by pressing the 'LIGHT' or 'SNOOZE' button while the clock is active. Some models may have adjustable brightness levels, typically controlled by holding down a specific button.
Technical Specifications
- Model: Lexon Flip Plus LR150 (also known as LR150X9)
- Dimensions: Approximately 104 mm (width) x 30 mm (depth) x 65 mm (height)
- Power Source: 2 x AAA 1.5V batteries (not included)
- Display: Reversible LCD
- Time Synchronization: Radio Controlled Clock (RCC)
Compliance and Recycling
This device complies with the essential requirements and other relevant provisions of Directive 2014/30/EU (Electromagnetic Compatibility) and Directive 2014/53/EU (Radio Equipment). A copy of the EU Declaration of Conformity can be found on the Lexon website.
Please dispose of this product responsibly at the end of its life. Look for the WEEE symbol [Recycling symbol] to indicate proper electronic waste disposal.
Additional Information
For further assistance or information regarding the Lexon Flip Plus LR150, please refer to the Lexon official website or contact their customer support. The design may also reflect collaborations, such as with artist Jean-Michel Basquiat, adding a unique artistic element.
