Lexon City Energy Pro

Introduction

Thank you for choosing the Lexon City Energy Pro. Before using the appliance, and to ensure the best use, please carefully read these instructions. Keep this manual for future reference.

Important Information

To ensure your Lexon device operates properly, use a DC 9V-2A Power Adapter (not supplied) or a Quick Charge 3.0 Power Adapter (not supplied). Using a charger or adapter with lower specifications than mentioned above will significantly affect wireless charging performance and audio quality, and may cause irreversible damage to your device.

In the Box

• 1x City Energy Pro
• 1x USB Type-C cable
• 1x User manual

Product Overview

The City Energy Pro is a versatile device combining a wireless charger and a Bluetooth speaker. It features:

• 1. Wireless charging surface: Place your Qi-enabled smartphone here for charging.
• 2. Speaker: Delivers audio playback.
• 3. Microphones: For hands-free calls and voice commands.
• 4. Wireless charging light indicator: Shows the status of wireless charging.
• 5. Bluetooth® light indicator: Shows the status of Bluetooth® connectivity.
• 6. Button: For controlling playback and calls.
• 7. USB Type-C port: For power input.

Features

• 10W Qi-certified wireless charger
• 3W Bluetooth® speaker
• Compatible with all Qi-enabled smartphones
• Dual microphone for enhanced call quality
• Optimized for conference calls
• Environment noise cancelling

Getting Started

1. Plug the provided USB Type-C cable into the charging port of the City Energy Pro.
2. Plug the USB end of the cable into a DC 9V-2A power adapter or a Quick Charge 3.0 USB power adapter.
3. Connect the power adapter to a power source.

When the device is powered, the light indicator next to the charging port turns blue.

Pairing Instructions

1. Long press the button to enter pairing mode. The speaker will emit a sound, and the blue light indicator will start flashing quickly.
2. On your mobile device, go to Bluetooth® settings and ensure Bluetooth® is switched on.
3. Look for "LEXON CITY ENERGY PRO" in the list of available devices and tap to connect.
4. Your speaker will emit a confirmation sound once paired.

Once paired and connected, the speaker will automatically connect to your device whenever it is turned on, provided the device is within range.

Light Status Indicators

Bluetooth® Mode

Wireless Charging Mode

If the light indicator does not work as described, unplug the power adapter and reconnect it.

Bluetooth® Hands-Free Operations

• Answer/End a call: Press the button once.
• Reject a call: Press and hold the button for 2 seconds.
• Redial last number: In standby mode, short press the button twice.
• Play/Pause: While Bluetooth® is in use, press the button to stop playing, and press again to continue playing.

How to Pair with Another Mobile Device

1. First, unpair or forget "LEXON CITY ENERGY PRO" from your current mobile device's Bluetooth® settings.
2. Perform a new pairing with the other mobile device.

Wireless Charging

To charge a Qi-enabled mobile phone:

1. Place a supported mobile phone on the wireless charging surface. Check the charging icon displayed on the phone's screen for charging status.
2. When the mobile phone is fully charged, remove it from the wireless charger surface.

If the light indicator does not work as described, unplug the power adapter and reconnect it.

Safety Precautions

• Protect the speaker from heat sources like radiators, heaters, air ducts, and direct sunlight.
• Wireless charging may not work properly with very thick phone cases. Remove the case before placing your phone on the charging surface if it is too thick.
• Avoid contact with liquids; keep away from water and high humidity conditions.
• Do not hit the product severely or insert conductive objects into the speaker or charging port during use.
• Do not place metal objects or magnets between the mobile phone and the wireless charging surface.
• Do not attempt to repair the speaker yourself. Seek professional service.
• Avoid electric shock; do not touch the device with wet hands.

Product Specifications

• Material: ABS / PU leather / Aluminum
• Dimensions: Wireless surface: 3.11 x 1.45 x 5.51 inches (7.9 x 3.7 x 14.3 cm)
• Bluetooth® Speaker: Ø 1.57 inches (Ø 4 cm)
• Weight: 217 g / 0.48 lbs
• International Warranty: 1 year

Audio Specifications

• Bluetooth® Version: 5.0
• Bluetooth® Range: 33 ft / 10m
• Speaker Unit: 1
• Rated Power: 3W
• Signal & Noise Ratio: ≤ 80 dB
• Frequency Range: 180Hz – 15KHz
• Impedance: 4Ω

Wireless Charging Specifications

• Compatibility: Qi-enabled smartphones
• Input: DC 9V-2A
• Output: 10W / 7.5W / 5W
• Transmission Distance: 3-6 mm
• Working Frequency: 110-205KHz
• Coil: 2 coils
• Connection Type: USB Type-C (cable included)

Compliance and Information

European Union (EU) Directive

LEXON hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU. The original EU declaration of conformity may be found at: EU Declaration of Conformity.

UK Conformity Assessment

The object described above is in conformity with the relevant Union harmonisation legislation. The original UK declaration of conformity may be found at: UK Declaration of Conformity.

USA - FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF exposure statements: This equipment complies with FCC radiation exposure requirements set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

RF exposure statements: This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and is safe for intended operation as described in this manual.

Disposal and Recycling Information

Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to public collecting points or points of sale. Details are defined by the national law of the respective country. This symbol on the product, manual, or package indicates that the product is subject to these regulations. By recycling, reusing materials, or other forms of utilizing old devices, you contribute to protecting the environment.

All brands or product names are or may be trademarks of their respective owners. Pictures and specifications are not contractual. Assembled in China.

Address: 125, Avenue des Champs-Élysées - 75008 Paris - FRANCE

Website: lexon-design.com

Social Media: @lexondesign