Lexon Miami Sunrise LR146 Wake-Up Light Alarm Clock

Introduction

The Lexon Miami Sunrise LR146 is designed to provide a gentle and natural awakening experience. It simulates the gradual increase of natural light, mimicking a sunrise, to help users wake up feeling more refreshed. The device also functions as an alarm clock and offers ambient light therapy options.

Key Features

• Sunrise simulation for gradual awakening
• Adjustable alarm time and sound options
• Ambient light therapy with multiple color settings
• Battery backup for clock and alarm functions during power outages
• Intuitive controls for easy operation

Safety Precautions

Please read and follow all safety instructions before using the Lexon Miami Sunrise LR146:

• Use only the provided AC adapter.
• Do not expose the device to water or moisture.
• Keep out of reach of children.
• Unplug the device during thunderstorms or when unused for long periods.
• Do not attempt to disassemble or repair the unit yourself.

Getting Started

Unpacking

Carefully remove the Lexon Miami Sunrise LR146 and its accessories from the packaging. Ensure all components are present.

Powering the Device

Connect the AC adapter to the power input port on the back of the device and plug the adapter into a standard electrical outlet.

Battery Backup Installation

To ensure the clock and alarm functions continue during a power interruption, insert 2 AA batteries (not included) into the battery compartment located on the base of the unit. Ensure correct polarity (+/-).

Setting the Clock

Upon first power-up or after a power outage without battery backup, the clock display may flash. To set the time:

1. Press and hold the 'Clock' button for a few seconds until the hour digits flash.
2. Use the '+' and '-' buttons to adjust the hour.
3. Press the 'Clock' button again to confirm the hour and move to the minute setting.
4. Use the '+' and '-' buttons to adjust the minutes.
5. Press the 'Clock' button one final time to set the time. The display will stop flashing.

Follow similar steps to set the date if applicable.

Using the Sunrise Simulation

The sunrise simulation feature gradually increases the light intensity over a set period before your alarm time, preparing you for a natural wake-up.

1. Ensure the alarm is set.
2. Activate the sunrise simulation mode. The duration (e.g., 30 minutes) and maximum brightness can typically be adjusted via dedicated buttons or through the clock setting menu.
3. The light will begin to glow softly 30 minutes before the set alarm time, gradually becoming brighter until it reaches full illumination at the alarm time.

Alarm Function

Set your desired wake-up time and choose an alarm sound.

1. Press the 'Alarm' button to enter alarm setting mode.
2. Adjust the alarm hour and minute using the '+' and '-' buttons, confirming with the 'Alarm' button.
3. Select an alarm sound if multiple options are available.
4. To turn off the alarm when it sounds, press the 'Alarm' button or the 'Snooze' button. Pressing 'Snooze' will temporarily silence the alarm and it will sound again after a few minutes.

Light Therapy

The device can be used as an ambient light source or for light therapy.

1. Press the 'Light' button to cycle through different light modes or colors.
2. Use the '+' and '-' buttons to adjust the brightness of the light.
3. Some models may offer specific light therapy programs; refer to the device's interface for these options.

Maintenance and Care

To clean the Lexon Miami Sunrise LR146, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

Device does not turn on: Ensure the AC adapter is properly connected to the device and the power outlet. Check if the power outlet is functioning.

Alarm does not sound: Verify that the alarm is set correctly and the volume is turned up. Ensure the device is powered on.

Light is not working: Check power connections. If the issue persists, contact customer support.

Specifications