Vera Dream Storage Bed Assembly Instructions

Vendor Information:

Vendor Name: LSMX1
Vendor Code: V-005852
Vendor Collection: VERA DREAM STORAGE

Parts List

ITEM	DESCRIPTION	QUANTITY
1	VERA DREAM HEADBOARD	1 PIECE
2	VERA DREAM RAILS/SLATS	1 KIT
3	VERA DREAM FOOTBOARD	1 PIECE
4	VERA DREAM DRAWERS	1 KIT

Hardware

ID	DESCRIPTION	QUANTITY
A	5/16-18X1" SCREW BUTTON HEAD CAP	X8
B	WASHER 5/16 PLAIN	X8
C	3/16 SHORT ARM HEX KEY	X2
D	5/16-18X 1 1/2" SCREW BUTTON HEAD CAP	X2

Hardware bag included in side rails and slat box with red ribbon to locate.

STEP 1: Attach side rails to headboard

Attach the side rails (2) to the headboard (1) using Wrench (C), 4 Screws (A) and Washers (B).

Diagram shows attaching side rails to the headboard using screws and washers.

STEP 2: Attach the "L" shape slat

Attach the "L" shape slat to the side rails (2) using 2 Screws (A) and Washer (B).

Diagram shows attaching an L-shaped slat to the side rails with screws and washers.

STEP 3: Attach support legs

Attach the support legs with leveler to the center slat. Adjust the levers on the bottom of support legs when necessary.

Diagram shows attaching support legs with levelers to a center slat.

STEP 4: Place the piece

Place the piece from top to bottom into the U-shaped slot.

Diagram shows placing a component into a U-shaped slot on the bed frame.

STEP 5: Secure the center slat

Hold the center slat with the "L" shape slat using Wrench (C), 1 Screw (D) and Washer (B).

Diagram shows securing the center slat with an L-shaped slat using a wrench, screw, and washer.

STEP 6: Insert footboard storage assembly

Insert the footboard storage assembly (instructions on drawers box) into the bed assembly as shown in the picture.

Diagram shows inserting the footboard storage assembly into the main bed frame.

STEP 7: Unroll the slats

Unroll the slats onto the center slat starting at the footboard and ending at the headboard.

Diagram shows unrolling slats across the bed frame from footboard to headboard.

STEP 8: Verify slat installation

Verify the slats are installed properly; the legs are perpendicular to the floor for full support.

Diagram shows a side view of the bed with slats properly installed and perpendicular to the floor.

Vera Dream Wings Assembly Instruction

Vendor Information:

Vendor Name: LSMX1
Vendor Code: V-005852
Vendor Collection: VERA DREAM

Parts List (Wings)

ITEM	DESCRIPTION	QUANTITY
1	VERA DREAM WINGS	2

Hardware (Wings)

ID	DESCRIPTION	QUANTITY
A	SLOT BRACKET	X2
B	CORNER BRACKET	X2
C	5/16-18X1-1/4" SCREW BUTTON HEAD CAP	X8
D	WASHER 5/16 PLAIN	X8
E	3/16 SHORT ARM HEX KEY	X2

Hardware bag included with red ribbon to locate.

STEP 1: Loosen screw

Loosen the screw (C), using a wrench (E) and turn it counterclockwise.

Diagram shows loosening a screw with a wrench in a counterclockwise direction (lefty-loosey).

STEP 2: Turn plate

Turn a plate clockwise and one for the counterclockwise.

Diagram illustrates turning plates in clockwise and counterclockwise directions.

STEP 3: Tighten screw

To tighten the screw (C), turn the wrench (E) following the direction of the hands of a clock (righty-tighty).

Diagram shows tightening a screw with a wrench in a clockwise direction (righty-tighty).

STEP 4: Attach brackets

Attach brackets (A & B) in the holes on the back and under the wings, using wrench (E), screw (C), and flat washers (D), following the direction of the clock.

Diagram shows attaching slot and corner brackets to the wings using screws and washers.

STEP 5: Raise bed to put inside side rail

Raise bed to put inside the side rail of wing bracket.

Diagram shows raising the bed to align the side rail with the wing bracket.

STEP 6: Attach bracket to headboard

Attach bracket (A) to headboard, using wrench (E), 4 screws (C), and flat washers (D), following the direction of the hands of a clock.

Diagram shows attaching a bracket to the headboard using a wrench, screws, and washers.

Additional Information

LS SKU: CAL KING

LS PRODUCT NAME: STORAGE BED VERA DREAM

Dimensions:

Height: 22.00
Length: 25.40

	Vera Dream Storage Bed and Wings Assembly Instructions Comprehensive assembly guide for the Living Spaces Vera Dream Storage Bed and Vera Dream Wings. Includes detailed steps, parts lists, and hardware information for a smooth setup.
	Vera Dream Storage Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly instructions for the Vera Dream Storage Bed and Vera Dream Wings by Living Spaces. Includes parts list, hardware details, and step-by-step guidance for a smooth setup.
	Vera Dream Storage Bed Assembly Instructions Step-by-step assembly instructions for the Vera Dream Storage Bed, including parts list, hardware details, and assembly diagrams.
	Vera Dream Storage Bed Assembly Instructions Assembly instructions for the Vera Dream Storage Bed, including parts list, hardware details, and step-by-step visual guides for assembly. Covers the bed frame, headboard, footboard, drawers, and optional wings.
	Vera Dream Bed Assembly Instructions Comprehensive assembly instructions for the Vera Dream Bed, including non-storage and with-wings models. This guide details the step-by-step process for assembling the headboard, footboard, side rails, slats, and optional wings, along with a list of required hardware.
	Vera Dream Storage Bed Assembly Instructions Comprehensive assembly guide for the Living Spaces Vera Dream Storage Bed and optional Wings, detailing parts, hardware, and step-by-step instructions for a successful setup.
	Vera Dream Storage Bed Assembly Instructions Step-by-step assembly guide for the Living Spaces Vera Dream Storage Bed (Cal King size), detailing parts, hardware, and assembly procedures for a complete bed frame.
	Vera Dream Bed and Wings Assembly Instructions \| Living Spaces Comprehensive assembly guide for the Living Spaces Vera Dream Bed and optional Vera Dream Wings. Includes detailed steps, parts lists, and hardware information for a smooth setup.