RENOGY ONE Core

Before Getting Started

This quick guide provides important operation and maintenance instructions for Renogy ONE Core (referred to as Core). Read carefully before operation and save for future reference. Failure to observe instructions or precautions can result in electrical shock, serious injury, or death, or damage the Renogy ONE Core, potentially rendering it inoperable.

• Renogy ensures the accuracy, sufficiency, and applicability of information at the time of printing due to continual product improvements.
• Renogy assumes no responsibility or liability for personal and property losses caused by user's failure to install and use the product in compliance with this guide.
• Renogy is not responsible or liable for failures, damages, or injuries resulting from repair attempted by unqualified personnel, improper installation, or operation.
• Illustrations are for demonstration purposes only; details may vary slightly depending on product revision and market region.
• Renogy reserves the right to change information without notice. For the latest quick guide, visit renogy.com.

Online Manual

QR codes are provided in the document to access the Quick Guide and User Manual online.

What's In the Box?

• Renogy ONE Core × 1
• Mounting Screws (M3.5*14mm) × 4 (1 extra)
• Power Cable (5m) × 1
• Quick Guide × 1

Get to Know RENOGY ONE Core

• Mounting Holes
• On/Off Button
• Communication Port
• Leveler
• Power Port
• Type-C Port

Installation Site and Environment

Suitable installation locations are shown for RVs. Ensure the device is installed vertically to the RV floor, with the screen pointing to the front, rear, left, or right side to enable the RV leveling function.

Operating Temperature: -4°F to 158°F (-20°C to 70°C)

Operating Humidity: 0% to 95%

Environmental Considerations: Keep Dry [?], Handle with Care [⚠️], For Indoor Use [?]

Note: RV leveling blocks are recommended during the leveling process.

Step 1 (A): Mount Renogy ONE Core on a Wall

1. Attach the mounting bracket to the wall.
2. Route cables through the bracket.
3. Drill pilot holes using an Impact Driver (55 mm opening).
4. Use a level to ensure correct orientation (✓ for correct, ✗ for incorrect).
5. Secure the bracket with Mounting Screws.
6. Connect cables to the device.
7. Attach the Renogy ONE Core to the bracket at a 45° angle.
8. Rotate the device to lock it into place.
9. The device will click when securely mounted.

Step 1 (B): Place Renogy ONE Core on a Table

The package box can be used as a stand to hold the Core when wall installation is not required. Note: The RV leveling function is unavailable when the Core is placed on a table.

Step 2: Install a Communication Cable (Optional)

Connect an RJ45 Ethernet Cable (maximum length: 6 m) to Devices (RS-485). Refer to the Renogy ONE Core User Manual for detailed instructions.

Step 3: Connect Renogy ONE Core to a Power Supply

Connect Renogy ONE Core using the included power cable or an optional Type-C cable (5V DC).

Installed on a Wall

Connect DC Power (8-60V) using the power cable. Alternatively, use a Type-C cable.

Installed on a Table

Connect DC Power (8-60V) using the power cable. Alternatively, use a Type-C cable.

Note: When installing the power cable, always connect the negative terminal first, then the positive terminal.

Step 4: Power On/Off

Long press the On/Off Button for 5 seconds to power the Core on or off.

Step 5: Pairing with DC Home

For initial startup, follow the startup wizard on the Core to pair it with the DC Home app. Alternatively, navigate to > System > Pair with App. Scan the QR code to pair Renogy ONE Core with the DC Home app.

Step 6: Add Devices

Renogy ONE Core can connect to Bluetooth, Bluetooth mesh, and Zigbee Renogy devices simultaneously.

The device discovery interface shows available Renogy devices such as Controllers, Batteries, Smart Plugs, Inverters, and Door Sensors.

RV Leveling

Access RV Leveling via the menu: > RV Leveling.

Configure the installation orientation, ensuring the screen is correctly aligned with the RV. Save and proceed.

Note: RV leveling calibration on Renogy ONE Core is required each time the installation site for the Core is changed.

Important Safety Instructions

• Keep Renogy ONE Core out of the reach of children.
• Do not dispose of Renogy ONE Core as household waste. Comply with local, state, and federal laws and regulations, and use recycling channels as required.
• Do not expose Renogy ONE Core to flammable or harsh chemicals or vapors.
• There are no user-serviceable parts in Renogy ONE Core. Do not open, dismantle, repair, tamper with, or modify it.
• Confirm the polarities of devices before connecting Renogy ONE Core to a power supply. A reverse polarity contact can result in damage to the Core, voiding the warranty.
• Ensure the connected DC power supply rates at 8V to 60V. Connecting the Core to a power source beyond this range results in power-on failure or permanent damage.
• An extended power cable can be used on demand. Refer to the Renogy ONE Core User Manual for details.

Disclaimer

Renogy ONE Core Quick Guide © 2023 Renogy. All rights reserved.

RENOGY and RENOGY are registered trademarks of Renogy.

All information in this quick guide is subject to copyright and other intellectual property rights of Renogy and its licensors. The quick guide may not be modified, reproduced, or copied, in whole or in part, without prior written permission from Renogy and its licensors. The registered trademarks are the property of Renogy. Unauthorized use of trademarks is strictly prohibited.

Renogy Support

To discuss inaccuracies or omissions in this quick guide or user manual, visit or contact us at:

• renogy.com/support/downloads
• contentservice@renogy.com

For technical questions about your product in the U.S., contact the Renogy technical support team:

• renogy.com/contact-us
• 1(909)2877111

For technical support outside the U.S., visit the local website:

• Canada: ca.renogy.com
• United Kingdom: uk.renogy.com
• Australia: au.renogy.com
• South Korea: kr.renogy.com
• Other Europe: eu.renogy.com
• China: www.renogy.cn
• U.S.: www.renogy.com
• Japan: renogy.jp
• Germany: de.renogy.com

Renogy Empowered

Renogy aims to empower people globally through education and distribution of DIY-friendly renewable energy solutions. The company strives to be a driving force for sustainable living and energy independence, offering solar products that help minimize carbon footprints by reducing reliance on grid power.

Live Sustainably with Renogy

A 1KW solar energy system can achieve significant environmental benefits monthly:

• Save 170 pounds of coal from being burned.
• Reduce CO₂ emissions by 300 pounds.
• Conserve 105 gallons of water.

Renogy Power PLUS

Renogy Power Plus allows users to stay updated on solar energy innovations, share their solar journey experiences, and connect with a community of like-minded individuals dedicated to changing the world.

Connect with Renogy on social media:

• YouTube: @Renogy Solar
• Instagram: @renogyofficial
• Facebook: @Renogy