Momcozy Auto Bottle Washer BS03 User Manual

Important Safeguards

When using electrical appliances, always observe basic safety precautions, including the following:

1. Failure to follow the instructions may cause irreparable damage and the manufacturer is not liable for the consequences.
2. During cold winter weather, use the product at room temperature to prevent potential product failure or safety issues caused by condensation on the surface.
3. Avoid exposing the product to high temperatures or direct sunlight, as this may cause aging or discoloration.
4. Only wash the bottle and its accessories to prevent unexpected damage.
5. Do not hang the power cord over the edge of the table or workbench where the product is placed.
6. Avoid placing the product on the edge of the table, to prevent potential vibration.
7. If you need to open the top cover while the machine is in operation, press "Pause" first.
8. When the spray arm is in operation, opening the top cover directly and quickly may cause hot water to spray out and cause harm.
9. If abnormal phenomena (such as a burning odor) occur during use, stop the operation and immediately unplug the device.
10. Ensure you unplug the product after use.
11. Certain conditions (e.g., higher altitude, or lower ambient temperature) may affect the maximum operating temperature, potentially impacting the product's sterilization function.
12. Before moving or storing the product, remove the power plug and wait for the product to cool. Turn off the product and disconnect the power supply before replacing accessories or touching moving parts during use.
13. Do not use accessories or detergents from other manufacturers; otherwise, the warranty on this product will be void.
14. Use pure water or water with low hardness; otherwise, scale may affect the washing quality of the bottle and its accessories, as well as the overall effectiveness and lifespan of the product.
15. The use of non-specific detergents is prohibited. Using detergents not specified for this product may cause product malfunction, damage, or safety problems.
16. Residue from milk powder is easier to clean than substances such as rice paste.
17. Clean any remaining milk powder before placing it into the main machine, to avoid affecting the washing quality.
18. This product is for home use only.
19. Keep children away from this product. If detergent comes into contact with the skin or eyes accidentally, rinse thoroughly with clean water and consult a doctor immediately. Cut up plastic bags to prevent children suffocation.
20. It is not recommended for use by individuals who are not in good physical health, have sensory or mental disorders, or lack of relevant experience and knowledge, to avoid unexpected losses.
21. If the product is faulty and the fault cannot be resolved according to the instructions, contact the manufacturer's after-sales service and professional maintenance personnel to solve the problem. It is prohibited to disassemble and repair the product yourself. If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department or, a similar department to prevent potential hazards.
22. Avoid using power strips to prevent overheating of the contact part of the plug due to poor contact.
23. Insert it into a grounded socket and ensure a secure connection.
24. Before connecting the product to the power supply, check if the product voltage matches the power supply voltage.
25. Do not plug in or unplug the power plug with wet hands.
26. It is prohibited to move the machine during the working period. If not used for an extended period, power should be turned off.
27. During or shortly after operation, do not touch the heating plate, the area around the vent, inside the shelf, etc., to prevent injury.
28. If the machine needs to stop working in an emergency, press and hold the 'power' button, wait for the drainage to stop, and then unplug it.
29. Only add water at normal temperature to the tank. Adding hot water may cause damage to the machine.
30. Do not directly add water to the washing cavity of the machine, as it may lead to abnormal consequences.
31. There is an air inlet at the bottom of the product; please do not block it.
32. Do not immerse the product in water when cleaning it.

Instructions for Use

Structural Representation

The Momcozy Auto Bottle Washer consists of the following parts:

• 1. Upper shelf
• 2. Upper spray arm
• 3. Lower shelf
• 4. Lower spray arm
• 5. Machine body
• 6. Operation panel
• 7. Top cover
• 8. Water tank cover
• 9. Water tank
• 10. Air filtration chip
• 11. Air filtration chip cover

Parts List

The package includes:

• Drain-pipe x1
• Supply cord x1

Note: The appearance and color of the product are subject to the actual object. The picture is for reference only.

Product Parameter

Control Panel Description

The control panel includes:

• 1. Power button
• 2. Start/Pause button
• 3. Water shortage indicator
• 4. Drying button
• 5. Rapid wash button
• 6. Normal wash button
• 7. Steam indicator
• 8. Fresh air indicator
• 9. Storage indicator
• 10. Steam indicator (repeated)

Installation Instructions

1. Installation: Remove the drain pipe and insert the interface end into the outlet pipe at the rear of the cleaning unit. Insert the power cord into the power cord port of the machine.
2. Connection: Place the other end of the drain pipe in a suitable drain container or sink.
3. Add Water to the Tank:
   • Method 1: Open the tank cover and add an appropriate amount of purified water or distilled water to the tank.
   • Method 2: Directly remove the water tank, add an appropriate amount of washing water, and then put the water tank back.

   Note: When adding water, it is recommended to fill the water up to the designated water level in the tank.

Instructions for Bottle Placement

1. Before cleaning, pour out all the milk in the bottle and then place it into the machine for cleaning to ensure optimal washing results.
2. Press the bottle holder and nipple holder clasps as shown to remove them from the bottom shelf (if applicable).
3. Refer to the standard layout diagram and arrange the parts of the milk bottle or tableware one by one.
• A. Invert the mouth of the milk bottle and insert it into the cavity, aligning it with the fixed spray hole on the lower shelf, so that the spray water column can fully wash the stain surface.
• B. Pacifiers: Pacifiers are placed on the four corner brackets of the lower shelf.
• C. Place the bottle cover, screw cap on the shelf.

Instructions for Breast Pump Placement

Place breast pump components, including the silicone rubber diaphragm, pumping valve, body of breast pump, and flange, onto the designated holders.

Instructions on the Placement of the Wearable Breast Pump

Place wearable breast pump components, such as the sucking mouth and breast pump cover, onto the holders. Holders can be removed as needed.

Place milk collector and flange onto the designated holders.

Place breast pump accessories and pumping valve onto the designated holders.

Instructions on the Placement of Children's Appliances

Arrange tableware and tableware covers on the upper shelf.

Place chopsticks and spoons on the lower shelf.

Ensure the gravity sphere assembly is correctly positioned.

The upper shelf can also be used to clean items like tea cups, gum, toys (silicone, plastic), and other small items.

Instructions for Washing Detergent Tablet

Detergent Tablet Usage: Put 1 detergent tablet into the bottle compartment.

Precautions for Not Recommended Utensils Cleaning

Operating Instructions

1. Arrange the equipment to be cleaned according to the operating instructions.
2. Add one Momcozy Official Washing Tablet directly into the washing cavity before starting the cycle. Use one tablet per wash for optimal cleaning performance.
3. Add an appropriate amount of water to the water tank, ensuring it does not fall below the minimum scale line.
4. Power on the machine and press the "ON/OFF" key to start. Select a washing program based on requirements, then press "START" key to begin. You can also press the "STORAGE" to add or cancel fresh air storage for up to 72 hours, or adjust steam by pressing "STEAM".
5. After drying, wait for 10 minutes before removing items due to high temperatures.

Note:

• To stop washing, press the "POWER" key for 3 seconds; it will stop after the automatic drainage.
• To pause midway and add cutlery, press "START" to pause, then open the top cover.
• Place the drainpipe horizontally downwards, not exceeding half the machine's height.
• Avoid using cleanser essence to prevent excessive foam, which may result in water leakage or failure. Use special detergent powder.
• Do not add water directly into the washing chamber.
• During washing or drying, the drainpipe and vent on the top cover may become very hot; avoid touching them.

Common Functions

NOTE: The maximum temperature for sterilization storage varies with altitude. *The machine will intelligently assess the ambient temperature and extend the drying time by 0-30 minutes, based on the default drying time, to ensure efficient drying.

Service Information

Maintenance and Cleaning

1. Appearance Cleaning: Use a piece of soft, moist cloth to scrub the box, transparent top cover, water tank, and water tank cover.
2. Clean Shelf and Spray Arm:
   1. Remove the upper jet arm assembly vertically upward.
   2. Open the lower shelf clasp with appropriate force (as indicated by the straight arrow), and use both hands to lift the lower shelf assembly up during installation.
   3. Remove the lower jet arm.
   4. Remove the residue holder by turning slightly to the right.
3. Rinse: You can rinse the shelf, the lower spray arm, the upper spray arm, the residue cup, and other parts.
4. Install: Install the components in the reverse order of Step 2.

Air Filter Replacement Instructions

1. Place the machine on its side and open the air filter cover.
2. Remove the air filter element.
3. Replace the air filter element with a new one.
4. Lock the air filter cover.

Fault Code

Troubleshooting

WARNING: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

Disposal

At the end of the product life cycle, do not throw this product into the normal household garbage, but bring it to a collection point for the recycling of electronic equipment and battery. Waste Electrical and Electronic Equipment may have potentially harmful effects on the environment. Improper disposal may lead to the accumulation of harmful toxins in air, water, and soil, which is harmful to human health. You have an obligation to dispose of the device correctly. Consult your municipal authority for information about disposal.

1. The maximum number of place settings to be washed is 4 sets of baby bottles.

2. This appliance is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments;
• Farm houses;
• By clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments.

3. The openings must not be obstructed by a carpet.

4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Declaration of Conformity

EU Compliance Statement: Hong Kong Lute Technology Co., Limited. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the LVD Directive 2014/35/EU and EMC Directive 2014/30/EU.

Manufacturer Information:
Manufacturer: Hong Kong Lute Technology Co., Limited
Address: Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon, Hongkong
E-mail: support@momcozy.com
MADE IN CHINA

[CE Mark]