Momcozy Bottle Warmer User Manual

Table of Contents

• Important Safety Instructions
• Technical Specifications
• Product Description
• Bottle Warmer Usage
• Cleaning and Care
• Descaling
• Declaration of Conformity

Important Safety Instructions

Read and save these instructions. Follow all precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a person responsible for their safety.
2. To avoid a hazard, the power cord must only be replaced by the manufacturer, its service agent, or a similarly qualified person.
3. The purpose of a short power cord (or detachable power cord) is to reduce the risk of entanglement or tripping over a longer cord. Do not use an extension cord.
4. Do not touch hot surfaces. Use handles or knobs.
5. Do not immerse the cord, plug, or (other parts) in water or other liquids to avoid the risk of electric shock.
6. Close supervision is necessary when the appliance is used by or near children.
7. Children should be supervised to ensure they do not play with the appliance.
8. Unplug the appliance from the power outlet when not in use and before cleaning. Allow the appliance to cool before assembling or disassembling parts.
9. Do not operate the appliance if the cord or plug is damaged, or if the appliance is malfunctioning or has been damaged in any way. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
10. The use of accessories not recommended by the appliance manufacturer may cause injuries.
11. Do not use the appliance outdoors.
12. Do not let the cord hang over the edge of a table or counter or touch hot surfaces.
13. Do not place the product on or near a hot gas or electric burner, or in a hot oven. Move appliances containing hot oil or other hot liquids with extreme caution.
14. Always plug the appliance into the socket first, then plug the cord into the power outlet. To unplug from the power outlet, turn any control to the OFF position, then remove the plug from the power outlet.
15. Do not use the appliance for purposes other than those indicated.
16. Splattering food can cause serious burns. Keep the appliance and its cord out of reach of children. Never let the cord hang below the counter outlet, and never use an extension cord.
17. The appliance must be disconnected from the power supply for servicing.
18. The appliance is not intended for outdoor use. For household and indoor use only.
19. Test the liquid temperature before feeding the baby by dropping a few drops on your palm.
20. Unplug the cord before servicing the appliance. Keep the cord out of reach of children.
21. Do not use the product without water. If you accidentally start using the product without water, unplug the appliance immediately and let it cool for 15 minutes before pouring water into the sterilization chamber.
22. Do not place your face directly above or in front of any part of the machine when opening the lid during use, as very hot steam will rise from the lid.
23. Use gloves or tongs to handle hot components, and beware of hot steam from the lid. Open the lid carefully after sterilization and beware of hot steam.
24. The water at the bottom may still be hot even if other parts of the appliance have cooled down. Proceed with caution.
25. Do not touch hot parts, such as the bottom, heating element, and lid, to avoid burns.
26. Unplug the appliance when it is not in use and before cleaning. Allow the appliance to cool before cleaning.
27. Ensure the lid is closed during sterilization. Do not open the lid during use to avoid burns.
28. This appliance can be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or instructed on how to use the appliance safely and understand the associated hazards.
29. Children aged 3 and above can use this appliance if they are supervised or instructed on how to use the appliance safely and understand the associated hazards. Children should not clean or maintain the appliance unless they are at least 8 years old and supervised. Keep the appliance and its cord out of reach of children under 3 years old.
30. Children must not play with the appliance.
31. This appliance is intended for use in households and similar applications, such as: staff kitchens in shops, offices, and other workplaces; farms; for customer use in hotels, motels, and other residential places; bed and breakfasts.
32. Do not immerse the appliance in liquid. Do not heat food for too long.

Save these instructions.

Follow the instructions below after heating:

1. The appliance will beep 3 times after heating.
2. Immediately lift the lid by holding the handles on the sides.
3. Remove the bottle and bottle basket from the warmer and avoid touching hot surfaces. Then shake the bottle.

Technical Specifications

Product Description

Product Overview

Bottle Warmer Components:

• Lid
• Bottle Warmer
• Control Panel
• Base
• Measuring Cup
• Bottle Basket
• Steam Chamber

Control Panel

The control panel features an LCD display and several buttons:

• LCD Display: Shows settings like temperature, time, and material type (Glass, Plastic, Silica).
• Buttons:
• ON/OFF: Power button to turn the device on or off.
• Function Selection: To choose between functions like warming, defrosting, or steaming.
• Material Selection: To select the bottle material (Glass, Plastic, Silica).
• Bottle Type: Options for Room Temperature Bottle, Cold Bottle.
• Defrost / Keep Warm 24h: For defrosting and keeping food warm for up to 24 hours.
• Food Warming: For warming baby food.
• Steam: For sterilizing bottles, utensils, etc.
• Quantity Selection: To select the amount of milk or food.
• Cold Bottle: Setting for warming cold bottles.
• Power On/Off: Button to turn the device on or off.

Bottle Warmer Usage

Before First Use

Unpack and clean all parts before the first use of the bottle warmer and after each use. Do not wash the main unit.

Setting Descriptions

• ON/OFF: Press once to turn on the device (light turns on). Press and hold to turn off (light turns off).
• Function Selection: Press to select functions like food warming, defrosting, or steaming.
• Room Temperature Bottle: Select this setting when warming a room temperature milk bottle (approx. 20-25 °C / 68-77 °F).
• Cold Bottle: Select this setting when warming a cold milk bottle (approx. 4-6 °C / 39.2-42.8 °F).
• Food Warming: Select this setting to warm a baby food jar.
• Defrost / Keep Warm 24h: Defrost a milk bottle/baby food jar to a liquid state. You can also use the 24-hour keep warm function.
• Steam: Select this setting to sterilize bottles/utensils/nipples.

Standby Mode

When you turn on the bottle warmer, it will beep once and the power button will turn green. Enter standby mode by pressing the power button. In standby mode, select your desired setting and then press the power button to enter operating mode.

Warming a Room Temperature Bottle

1. Place one milk bottle at a time into the bottle warmer.
2. Add 40 ml of water and place the lid on.
3. When the device is in standby mode, switch to operating mode by pressing the power button. Select your desired setting based on bottle material and milk volume by pressing the function selection button and then the desired material/volume buttons. (Default volume is 150 ml.)
4. Start normal warming by pressing the power button. A counter will appear.
5. The bottle warmer will beep 3 times when normal warming is complete. Unplug the bottle warmer when not in use.

Notes:

• Do not use the bottle warmer without adding water.
• Add 40 ml of water to the bottle warmer. Never let the water level exceed the top of the bottle or spill over the edge of the warmer.
• Shake the warmed milk bottle.
• Test the baby food temperature by dropping a few drops on your wrist before feeding the baby.
• Do not warm milk for too long.

Warming a Cold Bottle

1. Place one milk bottle at a time into the bottle warmer.
2. Add 40 ml of water and place the lid on.
3. When the device is in standby mode, switch to operating mode by pressing the power button. Select your desired setting based on bottle material and milk volume by pressing the function selection button and then the desired material/volume buttons. (Default volume is 150 ml.)
4. Start warming the cold bottle by pressing the power button. A counter will appear.
5. The bottle warmer will beep 3 times when warming the cold bottle is complete. Unplug the bottle warmer when not in use.

Notes:

• Do not use the bottle warmer without adding water.
• Add 40 ml of water to the bottle warmer. Never let the water level exceed the top of the bottle or spill over the edge of the warmer.
• Unplug the appliance when it is not in use.
• Shake the warmed milk bottle.
• Test the milk temperature by dropping a few drops on your wrist before feeding the baby.
• Do not warm milk for too long.
• Gently swirl the baby bottle before feeding the baby.

Defrost / Continuous Warming 24h

1. Place one bottle/jar/bag into the bottle warmer at a time.
2. Add water to the level of the bottle/jar. Ensure the water level does not exceed the top of the bottle warmer.
3. When the device is in standby mode, switch to operating mode by pressing the power button. Select your desired setting based on bottle material and milk volume by pressing the function selection button, then select THAW / 24H, and then press the power button. (The 24h function may skip this step).
4. Start defrosting or 24-hour continuous warming by pressing the power button. A counter will appear. (Tip: It is recommended to warm milk for a maximum of 3 hours.)
5. The bottle warmer will beep 3 times and automatically enter the 24-hour keep warm mode after defrosting is complete. The keep warm mode will maintain the milk temperature for 24 hours.
6. The bottle warmer will beep 3 times and automatically turn off after heating.

Notes:

• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with water just above the level of the milk in the bottle. Never let the water level rise above the top of the bottle or spill over the edge of the warmer.
• Unplug the appliance when it is not in use.
• Shake the warmed milk bottle.
• Test the milk temperature by dropping a few drops on your wrist before feeding the baby.
• Do not warm baby food for too long.

Steam

1. Clean the milk bottle before placing it in the bottle warmer.
2. Add 100 ml of drinking water and place the lid on.
3. When the device is in standby mode, switch to operating mode by pressing the power button. Press the function selection button and select STEAM, with a default time of 8 minutes.
4. Start steaming by pressing the power button.
5. The bottle warmer will beep 3 times and automatically turn off after steaming. The device will not enter the keep warm mode.

Food Warming

1. Place one baby food jar into the bottle warmer at a time.
2. Add drinking water to the level of the baby food jar. If there is a lot of baby food, ensure the water level does not exceed the top of the bottle warmer.
3. When the device is in standby mode, switch to operating mode by pressing the power button. Select your desired setting based on bottle material and milk volume by pressing the function selection button, then select FOOD, and then press the power button. (Default volume is 125 ml.)
4. Start food warming by pressing the power button. A counter will appear.
5. The bottle warmer will beep 3 times when food warming is complete. The bottle warmer will automatically enter the 24-hour keep warm mode.
6. The bottle warmer will beep 3 times and automatically turn off after heating.

Notes:

• Pour water into the inner container. Do not splash water onto the connector.
• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with water just above the level of the food in the jar. Never let the water level rise above the top of the bottle or spill over the edge of the warmer.
• Unplug the appliance when it is not in use.
• Test the milk temperature by dropping a few drops on your wrist before feeding the baby.
• Do not warm baby food for too long.

Cleaning and Care

1. Unplug the appliance and allow it to cool completely before cleaning.
2. Do not clean the appliance by immersing it in water.
3. Clean the interior surface with detergent and rinse with water. Wipe the exterior with a damp cloth. Do not clean the appliance with abrasive cleaners, chemical powders, or steel wool, as they will damage the exterior finish, affecting the product's lifespan and potentially causing safety issues.
4. Do not touch the heating plate with sharp objects or metal tools, as this may cause electric shock.
5. When the appliance is not in use, clean and dry the machine, turn the dust cover upside down, and place it in the inner container of the bottle warmer. Then place the appliance in its packaging and store it in a well-ventilated place.

Descaling

It is recommended to descale the bottle warmer every four weeks.

1. Unplug the appliance and allow it to cool before cleaning.
2. Mix 60 ml / 2 oz of white vinegar with 120 ml / 4 oz of cold water. (Mixing ratio: one part white vinegar to two parts water)
3. Turn on the appliance and select the steam setting for contents under 180 ml / 6 oz, and let the appliance run for 10 minutes.
4. Allow the solution to work in the bottle warmer until all limescale has dissolved.
5. Empty the bottle warmer and wash it with clean water.

Empty and rinse the bottle warmer thoroughly inside. If all limescale has not dissolved, repeat the descaling process.

Notes:

• Do not use mineral water that forms scale.
• You can extend the appliance's lifespan by letting it cool for 10 minutes before use.
• Check food temperature before feeding the baby.
• Fill the bottle warmer with clean water before use.
• You can also use citric acid-based descaling agents.
• Do not use other descaling agents.

This product has a symbol according to the WEEE directive for waste sorting. This means that this product must be handled according to EU Directive 2012/19/EU to be recycled or dismantled with minimal environmental impact. The user can hand over their product to an appropriate recycling organization or retailer when purchasing a new electrical or electronic device.

Declaration of Conformity

EU Declaration of Conformity: Hong Kong Lute Technology Co., Limited. declares that this appliance complies with the essential requirements and other relevant provisions of the LVD Directive 2014/35/EU and the EMC Directive 2014/30/EU.

Made in China

CE symbol

Manufacturer: Hong Kong Lute Technology Co., Limited

Address: Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon, Hongkong

Email: support@momcozy.com