JABLOTRON JA-110A II Internal Siren with Backup Battery
Visit JABLOTRON at www.jablotron.com
Product Overview
The JA-110A II siren is a component of the JABLOTRON system, designed for indicating alarms indoors. It allows for silencing ongoing alarms by pressing a button, which can also confirm the presence of individuals or activate an optional panic alarm. The siren occupies a specific position within the system and requires installation by a qualified technician holding a valid certificate issued by an authorized distributor.
Installation
Siren Disassembly
Photo 1: Siren Disassembly Before Installation illustrates the process of taking the siren apart. This involves:
- Removing the siren body (containing buttons) from the plastic frame by pressing on one side of the body (labeled 1 in Photo 1) with a screwdriver.
- Removing the central frame part (labeled 3 in Photo 1) by releasing the four tabs indicated by arrows (labeled 2 in Photo 1).
Internal Parts Description
Image 2: Description of Internal Parts details the components:
- 1 - LED Indicators
- 2 - Buttons
- 3 - Production Number
- 4 - Button Tabs
- 5 - Piezo Siren
- 6 - Bus Terminal
- 7 - Tamper Sensors
- 8 - Battery Connector for BAT-3V2-CR2
Installation Steps
- Remove the siren body (buttons) from the plastic frame by pressing on one side of the body (1.) using a screwdriver as shown in Photo 1.
- Remove the central frame part (3.) by pushing the 4 tabs indicated by the arrows (2.).
- Feed the BUS cable through a rectangular opening designated in the plastic base.
- Fix the plastic base to the selected location using screws. If the siren uses a battery, place it beneath the top part of the plastic base, as depicted in Photo 1.
- Assemble the plastic frame with the plastic base, which will secure the battery in its position.
System Assignment and Configurations
The recommended software or application for system assignment and configuration depends on the type of control panel used. Consult the control panel manual for specific instructions.
Technical Specifications
| Feature | Specification |
|---|---|
| Power | From control panel bus 12 V DC (8...15 V) |
| Optional Backup Battery | 3.2 V LiFePo4 CR2 0.4 Ah (Note: battery not included) |
| Standby Current Consumption (Backup) | 5 mA |
| Maximum Current Consumption (Cable Selection) | 120 mA |
| Low Battery Status | 2.9 V |
| Warning Device Type | Type Z / 24-hour backup |
| Siren | Piezoelectric, 100 dB/m (±5 dB/m) |
| Dimensions | 80 x 80 x 35 mm |
| Weight | 92 grams |
| Classification | Security Grade 2 / Environmental Class II (EN 50131-1) |
| Operating Environment | Indoor general |
| Operating Temperature Range | -10 °C to +40 °C |
| Operating Humidity | 75% RH, non-condensing |
| Certification Body | Trezor Test sro (No. 3025) |
| Complies With | EN 50131-1, EN 50131-4, EN 50130-4, EN 55032, EN 62368-1, EN 50581 |
| Recommended Screw | 2x Ø 3.5 x 40 mm (countersunk head) |
Compliance and Disposal
JABLOTRON a.s. declares that the JA-110A II complies with the relevant European Union harmonization legislation, including Directives No. 2014/35/UE, 2014/30/UE, and 2011/65/UE. The original conformity assessment is available for review on the JABLOTRON website in the downloads section (www.jablotron.com/downloads).
Disposal Note: Proper disposal of this product contributes to saving valuable resources and preventing potential negative impacts on human health and the environment that could arise from improper waste management. Please return the product to your distributor or contact your local authority for information on the nearest designated collection point.
For an electronic version of this document (available in other languages) or an installation version for JA-100 systems, scan the provided QR code.
