Jablotron JA-110A II Interior Bus Siren with Backup Battery
This document provides installation and operational details for the Jablotron JA-110A II interior bus siren.
Product Overview
The JA-110A II siren is part of the JABLOTRON system and is designed for indoor alarm signaling. It features a single button for silencing ongoing alarms, confirming presence, or triggering a panic alarm. Installation requires a qualified technician with a valid certificate from an authorized distributor.
Diagram showing the disassembly of the siren unit. Key components are labeled with numbers 1 through 8.
Component Descriptions:
- 1 - LED Indicators
- 2 - Buttons
- 3 - Production Number
- 4 - Button Lugs
- 5 - Piezoelectric Siren
- 6 - Bus Terminal
- 7 - Tamper Sensors
- 8 - Battery Connector for BAT-3V2-CR2
Installation
- Remove the siren body (buttons) from the plastic frame by pressing a side of the body (1) with a screwdriver as shown in Figure 1.
- Remove the central part of the frame (3) by pushing the 4 indicated lugs with arrows (2).
- Feed the BUS cable through a rectangular cutout in the plastic base.
- Fix the plastic base to the chosen location using screws. If the siren operates with a battery, place it under the plastic base cover as illustrated in Figure 1.
- Assemble the plastic frame with the plastic base, which will secure the battery in place.
System Assignment and Parameters
Refer to the control panel manual for system assignment and parameter configuration using the recommended software or application.
Specifications
| Feature | Specification |
|---|---|
| Power | From the control panel bus 12 V DC (8...15 V) |
| Backup Battery (Optional) | 3.2 V LiFePo4 CR2 0.4 Ah (Battery not included) |
| Current Consumption (Standby) | 5 mA |
| Current Consumption (Max for Cable Selection) | 120 mA |
| LowBatt Status | 2.9 V |
| Device Type | Siren (Z/backup 24h type) |
| Sound Output | Piezoelectric, 100 dB/m (±5 dB/m) |
| Dimensions | 80 x 80 x 35 mm |
| Weight | 92 g |
| Classification | Security Grade 2 / Environmental Class II (EN 50131-1) |
| Operating Environment | Indoor general use |
| Operating Temperature Range | -10 °C to +40 °C |
| Operating Humidity | 75% RH, non-condensing |
| Certification Body | Trezor Test sro (No. 3025) |
| Conformity | EN 50131-1, EN 50131-4, EN 50130-4, EN 55032, EN 62368-1, EN 50581 |
| Recommended Screws | 2x Ø 3.5 x 40 mm (countersunk head) |
Declarations and Disposal
JABLOTRON a.s. declares that the JA-110A II complies with EU harmonisation legislation: Directives No. 2014/35/UE, 2014/30/UE, and 2011/65/UE. The original conformity assessment is available at www.jablotron.com in the Downloads section.
Disposal Information: Proper disposal of this product helps preserve valuable resources and prevent negative environmental and health effects. Please return the product to your retailer or contact your municipality for the nearest collection point.
For an electronic version of this manual or a version for the JA-100+ system, scan the QR code provided or visit www.jablotron.com.
