Jablotron JA-110A II Internal Siren with Backup Battery
This document provides installation and specification details for the Jablotron JA-110A II internal siren.
Product Overview
The JA-110A II siren is a component of the JABLOTRON system, used for indoor alarm signaling. It allows for silencing ongoing alarms, confirming presence, or activating a panic alarm (optional function). Installation requires a qualified technician with a valid certificate from an authorized distributor.
Note: This document was automatically translated from the original English. In case of ambiguities or doubts, refer to the original English document. If errors are found or further questions arise, contact technical support.
Installation
Follow these steps for installation:
- Remove the siren body (buttons) from the plastic frame by pressing one side of the body (1.) with a screwdriver, as shown in Figure 1.
- Remove the central part of the frame (3.) by pushing the 4 tabs indicated by the arrows (2.).
- Pass the BUS cable through the rectangular cavity in the plastic base.
- Fix the plastic base to the chosen location using screws. If the siren includes a battery, place it under the upper side of the plastic base, as shown in Figure 1.
- Assemble the plastic frame with the plastic base, which will secure the battery in place.
Figure 1: Siren disassembly before installation.
Figure 2: Internal parts description: 1 - LED indicators; 2 – Buttons; 3 – Production number; 4 – Button tabs; 5 – Piezoelectric siren; 6 – Bus terminal; 7 – Anti-tamper sensors; 8 - Battery connector for BAT-3V2-CR2.
System Assignment and Settings
Depending on the control panel type, use the recommended software or application. Refer to the control panel manual.
Specifications
| Parameter | Specification |
|---|---|
| Power | From the control panel bus 12 V DC (8...15 V) |
| Optional backup battery | 3.2 V LiFePo4 CR2 0.4 Ah (battery not included) |
| Standby current consumption for backup | 5 mA |
| Maximum current consumption for cable selection | 120 mA |
| LowBatt status | 2.9 V |
| Type of warning device | Z/backup type 24 hours |
| Siren | Piezoelectric, 100 dB/m (±5 dB/m) |
| Dimensions | 80 x 80 x 35 mm |
| Weight | 92 grams |
| Classification | Security Grade 2 / Environmental Class II (EN 50131-1) |
| Operating environment | Indoor general use |
| Operating temperature range | -10 °C to +40 °C |
| Average operating humidity | 75% RH, non-condensing |
| Certification body | Trezor Test s.r.o. (No. 3025) |
| Conforms to | EN 50131-1, EN 50131-4, EN 50130-4, EN 55032, EN 62368-1, EN 50581 |
| Recommended screw | 2x 3.5 x 40 mm (countersunk head) |
Compliance and Disposal
CE Marking: JABLOTRON a.s. hereby declares that the JA-110A II device is in compliance with the relevant EU harmonization legislation: Directives No. 2014/35/EU, 2014/30/EU, 2011/65/EU. The original conformity assessment document is available at www.jablotron.com - Download Section.
UKCA Marking: [UKCA symbol]
Disposal Note: Proper disposal of this product helps conserve valuable resources and prevent potential negative effects on human health and the environment. Return the product to the retailer or contact the local authority for information on the nearest designated collection point.
For an electronic version of this manual (available in other languages) or an installer version for JA-100+, scan the QR code provided.
