Lighting Fixture Installation and Safety Guide

WARNING

(To reduce the risk of fire, electric shock, or injury to persons):

1. We suggest installation by a licensed electrician.
2. Please read the instruction carefully and save it as you may need it at later time.
3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place the wall switch in the “OFF” position.
4. Mounting surface should be clean, dry, flat, strong enough and 1/4" larger than the canopy on all side. Any gaps between the mounting surface and canopy exceeding 3/16" should be corrected as required.
5. Make sure that the ceiling or wall can bear the weight of the lamp before fixture.
6. Make sure the voltage you are using is 120V. The maximum wattage is 60W per bulb.
7. Keep the lamp away from acidic objects in case of damaging the surface of the lamp.
8. When replacing bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.
10. Do not touch the bulb or lamp shade during the lighting fixture working.

Image for finished product: A description of the finished product, which appears to be a chandelier with multiple tiers of geometric patterns.

Accessories List:

• ? Screw
• ? Wire connector
• ℹ️ Instruction

Installation Procedures

First:

A) Open the package and take out all the parts or accessories, then place them on a clean flat place. B) Please turn off the power.

Wiring Diagram Description:

Connect Black or Red Supply Wire to: Black (*Parallel cord (round & smooth) / Clear, Brown, Gold or Black without tracer)

Connect White Supply Wire to: White (*Parallel cord (square & ridged) / Clear, Brown, Gold or Black with tracer)

Ground Wire Connection: GREEN GROUND SCREW connects to OUTLET BOX GROUND and FIXTURE GROUND.

Wire Types:

• Insulated wire (other than green) with copper conductor
• Insulated wire (other than green) with silver conductor

Note on Parallel Wires (SPT I & SPT II): The neutral wire is square shaped or ridged, and the other wire will be round in shape or smooth.

Installation Steps:

1. Attach the lamp head base to the maximum lampshade.
2. Attach the mounting bracket to the junction box.
3. Connect the live wire (L), zero wire (N) and ground wire (E) to the junction box.
4. Lock the mounting bracket with the black nut.
5. Install the remaining 2 lampshade frames and hang them on the lamp body in turn.
6. Install the E12 bulb.

Diagram Description (Parts):

• 1: Lamp body/fixture base
• 2: Mounting bracket
• 3: Ceiling/junction box
• 4: Chain/suspension
• 5: Lampshade frame
• 6: E12 bulb

After-sales Service

Users who purchased this product could contact us at any time within one year if there is any quality problem.