ITEM NO. :T3286BU
ASSEMBLY INSTRUCTIONS
- Install the mounting plate (A) on the outlet box with the screws (B).
- Connect the fixture wire to the circuit wire with the wire nuts (C): black wire with live wire, white wire with neutral wire, ground wire with ground wire. Turn the wire nuts to twist the wires together. Wrap the wire nuts with insulated rubber tape.
- Fix the canopy (D) to the mounting plate (A) with the screws (E).
Please consult a qualified Electrician if you are not familiar with electrical wiring.
Diagram Overview
The provided diagram illustrates the electrical wiring and mounting process for the T3286BU lighting fixture. It depicts an outlet box connected to house wiring, including a "Ground Wire", "Live Wire", and "Neutral Wire". The fixture itself has corresponding wires: a black wire, a white wire, and a ground wire. These fixture wires are connected to the house wires using wire nuts (labeled C). The assembly involves attaching a mounting plate (A) to the outlet box using screws (B), and then securing the fixture's canopy (D) to the mounting plate with screws (E). An "ON/OFF" switch mechanism is also shown. A separate small graphic displays a standard electrical wall plate.
