B3302-4BU Lighting Fixture Assembly Instructions

Diagram: Assembly Overview

The assembly diagram illustrates the connection process for the lighting fixture:

• An "Outlet Box" is shown, connected to "Ground Wire", "Live Wire", and "Neutral Wire".
• A mounting plate, labeled "A", is attached to the outlet box using screws, labeled "B".
• Fixture wires, labeled A, B, and C, are connected to the corresponding house wires using wire nuts, labeled "C". Specifically, the black fixture wire connects to the live wire, the white fixture wire connects to the neutral wire, and the ground fixture wire connects to the ground wire.
• The canopy, labeled "D", is secured to the mounting plate "A" with screws labeled "E".
• The lamp shade, labeled "F", is placed onto the socket and fastened with a socket ring, labeled "G".
• A bulb, labeled "H", is screwed into the lamp holder.
• A dashed line labeled "E" indicates a connection point or area in the diagram.

Recommended Bulb Shapes

The following bulb shapes are recommended for this fixture, with their dimensions:

• A60: Height: 4.3 inches, Width: 2.37 inches.
• A15: Height: 3.5 inches, Width: 1.97 inches.
• G50: Height: 3 inches, Width: 1.97 inches.

An illustration shows the assembled fixture with four bulbs installed, suggesting the fixture accommodates multiple bulbs of a similar type.