BRIMNES Chest of 4 Drawers Assembly Instructions

Tools Required

• Phillips Head Screwdriver ?️
• Flathead Screwdriver ?️
• Hammer ?

Important Notes & Safety

• Do not stand on the product. [??‍♂️]
• Assemble on a soft surface like a carpet to prevent scratches. [?️✅]
• If you encounter difficulties during assembly, please contact IKEA customer support. [?❓ IKEA]

Parts List

• Part 101345: 16x
• Part 110519: 16x
• Part 118331: 16x
• Part 112996: 16x
• Part 119030: 8x
• Part 118224: 8x
• Part 109567: 16x
• Part 105344: 4x
• Part 100365: 4x
• Part 107091: 4x
• Part 158933: 4x
• Part 123771: 4x
• Drawer Slide Components (Parts 124328, 128763, 156619): 4 sets

Assembly Steps

Step 1: Assemble Drawer Boxes

Prepare one drawer box (1x) and three drawer boxes (3x). Secure the components using parts 118331 and 112996. [?⚙️]

Step 2: Attach Side Panels to Base

Attach the main side panels to the base panel. Use part 101345 for securing. [?⚙️]

Step 3: Attach Remaining Side Panels

Attach the remaining side panels to the structure. Use parts 119030 and 118224 for securing. [?⚙️]

Step 4: Insert Panel

Insert the designated panel into the frame. [➡️]

Step 5: Attach Top Panel

Place and secure the top panel onto the assembled frame. [⬆️]

Step 6: Secure Frame

Reinforce the main frame structure by fastening screws. Use part 110519 screws, approximately 4x per connection point. [?⚙️ 4x]

Step 7: Attach Back Panel

Attach the back panel to the rear of the assembled frame. Secure using part 107091 pins/nails. [?⚙️ 4x]

Step 8: Install Drawer Runners (Main Unit)

Attach the drawer runners (part 158933) to the inside of the main unit's side panels. Secure with part 100365 screws. [?⚙️]

Step 9: Install Drawer Runners (Drawer Boxes)

Attach the corresponding drawer runners (part 100365) to the sides of the drawer boxes. Secure using part 107091. [?⚙️]

Step 10: Attach Drawer Fronts

Attach the drawer front panels to the drawer boxes. Use parts 105344 and 123771 for alignment and securing. [?⚙️]

Step 11: Attach Drawer Handles

Attach the drawer handles to the front of the assembled drawers. Use part 105344 for securing. [?⚙️]

Step 12: Final Drawer Assembly

Connect the drawer fronts with handles to the drawer boxes. Secure using part 109567 screws, typically 2x per drawer. [?⚙️ 2x]

Step 13: Insert Drawers and Final Check

Insert the completed drawers into the main unit. Ensure all parts are securely fastened and the unit is stable before use. [➡️ ✔️]