BJÖRKSNÄS Chest of 5 Drawers

Safety Warnings

⚠️ WARNING

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Read and follow each step of the instructions carefully.

Tools Required

[Screwdriver (Phillips head)], [Screwdriver (flathead)], [Pencil], [Spirit level], [Drill], [Drill bit Ø 8 mm (5/16")], [Drill bit Ø 3 mm (1/8")]

Assembly Steps

Step 1: Attach Drawer Slides to Side Panels

Attach the drawer slides (e.g., 125328, 125327) to the inner sides of the main cabinet panels using screws (e.g., 118331, 100365).

Diagram shows drawer slides being attached to side panels.

Step 2: Prepare Drawer Slide Components

Further preparation of drawer slide components using screws (e.g., 100365).

Diagram shows detailed views of drawer slide assembly.

Step 3: Assemble Main Frame Base

Connect the base panel with the side panels using dowels (e.g., 101350) and screws (e.g., 101350).

Diagram shows connecting base panel to side panels.

Step 4: Attach Side Panels to Base

Secure the side panels to the base structure using screws (2x).

Diagram shows attaching side panels to the base.

Step 5: Attach Drawer Slide Runners

Attach drawer slide runners to the main cabinet structure using screws (e.g., 110630).

Diagram shows attaching drawer slide runners to the cabinet frame.

Step 6: Attach Back Panel Support

Attach a support piece to the back of the cabinet structure.

Diagram shows attaching a vertical panel to the back.

Step 7: Attach Back Panel

Attach the back panel to the main structure using screws (e.g., 3x 100092, 100214).

Diagram shows attaching the back panel.

Step 8: Prepare Top Panel

Attach components to the underside of the top panel for drawer slide support using screws.

Diagram shows attaching fittings to the underside of the top panel.

Step 9: Attach Top Panel

Attach the top panel to the assembled cabinet structure using screws (e.g., 4x 110630).

Diagram shows placing and securing the top panel.

Step 10: Attach Top Panel Fittings

Attach additional fittings to the top panel using screws (e.g., 3x 100092, 100214).

Diagram shows attaching fittings to the top panel.

Step 11: Secure Top Panel

Further secure the top panel using screws (e.g., 4x 157732).

Diagram shows securing the top panel.

Step 12: Prepare Top Panel for Drawer Slides

Attach components to the underside of the top panel using screws (e.g., 8x 118331, 112996).

Diagram shows attaching components to the underside of the top panel.

Step 13: Attach Drawer Slide Brackets to Top Panel

Attach brackets (e.g., 106989) to the top panel using screws (e.g., 2x 100823, 109049).

Diagram shows attaching brackets to the top panel.

Step 14: Attach Drawer Slides to Drawer Sides

Attach the drawer slide components to the sides of the drawer boxes using screws (e.g., 100365, 125328).

Diagram shows attaching drawer slides to drawer side panels.

Step 15: Attach Drawer Slide Components

Continue attaching drawer slide components to the drawer boxes using screws (e.g., 100365, 125327).

Diagram shows attaching drawer slide components to drawer boxes.

Step 16: Attach Drawer Fronts

Attach the drawer fronts to the assembled drawer boxes using screws (2x 101350).

Diagram shows attaching drawer fronts to drawer boxes.

Step 17: Insert Drawer Slides into Cabinet

Insert the assembled drawer slides into the corresponding runners attached to the main cabinet structure.

Diagram shows inserting drawer slides into the cabinet runners.

Step 18: Secure Drawer Slides

Secure the drawer slides in place using fittings (e.g., 2x 110630).

Diagram shows securing drawer slides with fittings.

Step 19: Attach Drawer Handles

Attach the drawer handles to the drawer fronts.

Diagram shows attaching handles to drawer fronts.

Step 20: Insert Drawers into Cabinet

Slide the assembled drawers into the cabinet, engaging with the runners.

Diagram shows two people inserting drawers into the cabinet.

Step 21: Finalize Drawer Installation

Secure the drawers in place using fittings (e.g., 6x 110630).

Diagram shows securing drawers with fittings.

Step 22: Level the Unit

Adjust the feet of the unit to ensure it is level on the floor.

Diagram shows adjusting the feet of the cabinet.

Step 23: Attach Anti-Tip Bracket to Unit

Attach the anti-tip bracket to the back of the unit using screws (2x).

Diagram shows attaching an L-shaped bracket to the top rear of the cabinet.

Step 24: Secure Unit to Wall

Use a drill and appropriate wall anchors and screws to secure the anti-tip bracket to the wall.

Diagram shows using a drill to secure the unit to the wall.

Step 25: Final Drawer Attachment

Final attachment of drawer components, possibly related to the drawer slide mechanism or locking.

Diagram shows final adjustments to drawer slide mechanisms.

Step 26: Insert Drawers

Insert the completed drawers into the cabinet.

Diagram shows the BJÖRKSNÄS chest of drawers with arrows indicating drawer insertion.

Step 27: Drawer Operation Check

Check the operation of the drawers. A warning icon indicates caution regarding drawer use.

Diagram shows a drawer being pulled out, with a warning icon.

Step 28: Attach Drawer Runners to Cabinet Sides

Attach drawer runners to the inside of the cabinet side panels using screws (2x).

Diagram shows attaching drawer runners to the cabinet sides.

Step 29: Attach Drawer Slides to Drawer Fronts

Attach drawer slides to the drawer fronts using screws (2x).

Diagram shows attaching drawer slides to drawer fronts.

Step 30: Insert Drawer Slides

Insert the drawer slides into the cabinet runners.

Diagram shows inserting drawer slides into the cabinet.

Step 31: Final Drawer Installation

Complete the drawer installation, possibly by securing the slides or engaging locking mechanisms using screws (2x).

Diagram shows final drawer installation steps.

Step 32: Drawer Slide Adjustment

Adjust the drawer slides for smooth operation, possibly using specific fittings (2x).

Diagram shows adjusting drawer slide mechanisms.

Step 33: Completed Unit

The BJÖRKSNÄS chest of drawers is now fully assembled.

Diagram shows the fully assembled BJÖRKSNÄS chest of drawers.

Wall Anchoring Instructions

For safety, it is crucial to anchor the furniture to the wall using the provided anti-tip device. The following methods are illustrated:

Method A: For Solid Walls

1. Drill a hole of Ø 8 mm (5/16").
2. Insert a wall anchor (e.g., 109049).
3. Secure the bracket using a screw (e.g., 100823).

Method B: For Stud Walls or Drywall

1. Drill a hole of Ø 8 mm (5/16").
2. Insert a suitable wall anchor (e.g., 109048).
3. Secure the bracket using a screw (e.g., 106989).

Method C: For Softer Walls or Specific Anchors

1. Drill a hole of Ø 3 mm (1/8").
2. Insert a wall anchor (e.g., 121714).
3. Secure the bracket using a screw (e.g., 100823).

Ensure the chosen anchor is appropriate for your wall type and can support the weight of the furniture and its contents.

Refer to www.IKEA.com/secure-it for more information on wall anchoring.