MALM Chest of Drawers
Assembly Instructions
Safety First
⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instructions carefully.
Tools Required
Tools typically needed for assembly include:
- Phillips head screwdriver
- Flathead screwdriver
- Hammer
- Drill
Drill bit sizes mentioned: Ø 8 mm (5/16") and Ø 3 mm (1/8").
Parts Identification
The following hardware and components are used during assembly. Quantities are specified per step where applicable.
- Main Components: Side panels, top panel, base panel, back panels, drawer slides, handles.
- Hardware:
- Screws: Various types and sizes (e.g., part 118331, 100365, 153548, 109049, 100823).
- Dowels: Wooden dowels (e.g., part 101359, 101345).
- Cam Locks & Bolts: For connecting panels (e.g., part 110126, 120076).
- Brackets: For support and anti-tip securing (e.g., part 10038685, 106989).
- Handles: For drawers (e.g., part 155669).
- Wall Plugs: For wall anchoring (e.g., part 121714).
Assembly Steps
Follow these steps to assemble your MALM chest of drawers:
Step 1: Attach Drawer Slides to Side Panels
Description: Attach drawer slide assemblies (parts 118788, 118789) to the inner sides of the main frame panels using screws (e.g., part 118331).
Step 2: Assemble Base and Side Panels
Description: Connect the base panel to the side panels using dowels and cam lock/bolt systems.
Step 3: Attach Back Support
Description: Secure the back support panel to the frame using screws.
Step 4: Attach Top Panel
Description: Position the top panel onto the assembled frame and secure it using cam locks and bolts.
Step 5: Connect Frame Components
Description: Continue assembling the main frame by connecting side, base, and top panels using the provided hardware.
Step 6: Insert Dowels
Description: Insert wooden dowels into pre-drilled holes on vertical support pieces.
Step 7: Secure Vertical Supports
Description: Attach vertical support pieces to the frame using cam lock and bolt systems.
Step 8: Attach Top Panel
Description: Secure the top panel to the frame using screws.
Step 9: Place Top Panel
Description: Carefully position the top panel onto the assembled structure.
Step 10: Secure Top Panel
Description: Use cam locks and bolts to firmly attach the top panel to the frame.
Step 11: Attach Side Panels
Description: Connect the side panels to the top panel using the appropriate hardware.
Step 12: Attach Drawer Slides to Frame
Description: Attach the remaining drawer slide components to the assembled unit.
Step 13: Attach Bottom Panel
Description: Secure the bottom panel to the frame using screws.
Step 14: Attach Bottom Panel
Description: Secure the bottom panel to the frame using screws.
Step 15: Attach Drawer Runners
Description: Attach drawer runners to the main unit frame using screws.
Step 16: Attach Drawer Runners
Description: Attach additional drawer runners to the unit using screws.
Step 17: Attach Vertical Support
Description: Attach a vertical support piece to the unit.
Step 18: Insert Dowels
Description: Insert wooden dowels into vertical support pieces.
Step 19: Secure Frame with Cam Locks
Description: Use cam locks and bolts to secure various frame components.
Step 20: Main Frame Assembly Complete
Description: The main structure of the chest of drawers is now assembled.
Step 21: Attach Drawer Slides
Description: Secure drawer slides to the frame using cam locks.
Step 22: Attach Drawer Runners
Description: Attach drawer runners to the unit using screws.
Step 23: Attach Support Shelf
Description: Attach a support shelf to the unit using screws.
Step 24: Attach Brackets
Description: Attach support brackets to the unit, potentially for wall mounting or stability.
Step 25: Insert Dowels
Description: Insert wooden dowels into vertical support pieces.
Step 26: Insert Dowels
Description: Insert wooden dowels into vertical support pieces.
Step 27: Secure Top Panel
Description: Secure the top panel using cam locks.
Step 28: Secure Top Panel
Description: Secure the top panel using cam locks.
Step 29: Attach Handles
Description: Attach drawer handles using cam locks.
Step 30: Attach Handles
Description: Attach drawer handles using screws.
Step 31: Attach Top Surface
Description: Place the top surface onto the assembled frame and secure it with screws.
Step 32: Secure Top Surface
Description: Secure the top surface with screws.
Step 33: Secure Top Surface
Description: Secure the top surface with screws.
Step 34: Secure Top Surface
Description: Secure the top surface with screws.
Step 35: Final Connections
Description: Make final connections to ensure the top surface is securely attached.
Step 36: Secure Top Surface
Description: Secure the top surface with a large number of screws.
Step 37: Attach Drawer Slides
Description: Attach drawer slides to the main unit frame.
Step 38: Insert Drawers
Description: Insert the assembled drawers into the unit.
Step 39: Attach Drawer Fronts/Runners
Description: Attach drawer front components or runners using screws.
Step 40: Insert Drawers
Description: Insert the assembled drawers into the unit.
Wall Anchoring Instructions
It is critical to secure the furniture to the wall to prevent tipover accidents. Follow these instructions carefully:
Important: Ensure you are drilling into a suitable wall material. If unsure, consult a professional.
- For solid walls (e.g., concrete, brick): Drill holes using an Ø 8 mm (5/16") drill bit. Insert wall plugs (part 121714). Attach brackets using screws.
- For hollow walls (e.g., plasterboard): Drill holes using an Ø 8 mm (5/16") drill bit. Insert appropriate wall anchors (not specified, but typically required for hollow walls). Attach brackets using screws.
- For wooden studs: Drill pilot holes using an Ø 3 mm (1/8") drill bit. Attach brackets directly with screws.
The diagrams show attaching the anti-tip bracket (part 106989) to the furniture and then securing it to the wall. The recommended URL for more information on secure furniture is www.IKEA.com/secure-it.
Measurements for wall anchoring: Some brackets require placement approximately 70 mm (3/4") from the top edge, while others are approximately 30 mm (≈1 1/4") from the top edge.
