JLab Fit Sport 3 Wireless Earbuds

Warranty & Contact

YOUR WARRANTY
All warranty claims are subject to approval by the manufacturer JLab Audio and at our discretion. Keep your proof of purchase to ensure your warranty rights.

CONTACT US
Reach us at support@jlabaudio.com or visit intl.jlabaudio.com/contact

REGISTER TODAY
Visit intl.jlabaudio.com/register for product updates, usage tips, and frequently asked questions.

First Setup: Pairing via Bluetooth

1. Turn on Bluetooth in your device's settings. (Diagram: Phone screen showing Bluetooth settings with Bluetooth toggled ON.)

2. Press and hold the button for 10 seconds. Release the button. The LED indicator will flash red and blue, indicating pairing mode. (Diagram: Earbud showing multi-function button and LED indicator.)

3. To connect, select "JLab BT" in your device's Bluetooth settings. The LED indicator will slowly flash blue during pairing via Bluetooth. (Diagram: Phone screen showing Bluetooth settings with "JLab BT" selected. Arrow points to "JLab BT". Earbud diagram shows LED flashing blue.)

RE-USE
When JLab BT is first paired with your device, the earbuds will automatically connect to your device via Bluetooth when turned on again. (Follow KEY FUNCTIONS instructions)

Key Functions

(Diagram: Earbud showing multi-function button, volume up/down buttons, and LED indicator with labels.)

• VOLUME UP: Single click
• NEXT TRACK: Press and hold for over 2 seconds
• POWER ON: Press and hold for over 3 seconds
• POWER OFF: Press and hold for over 5 seconds
• PLAY / PAUSE ANSWER / END CALL: Single click
• ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): Double click
• PAIRING VIA BLUETOOTH: Follow the first setup procedure.
• VOLUME DOWN: Single click
• PREVIOUS TRACK: Press and hold for over 2 seconds

Equalizer Modes

Quickly press both buttons for different EQ settings. The Fit Sport 3 will cycle through 3 EQ settings:

• JLab SIGNATURE (One sound notification): Characteristic JLab C3™ sound with enhanced vocals and bass.
• AUSGEWOGEN (Balanced) (Two sound notifications): Balanced sound without additional amplification.
• BASS BOOST (Three sound notifications): Enhanced bass and sub-bass.

Voice Prompts

• Power On: Chime
• BLUETOOTH CONNECTED: 2 chimes
• LOW BATTERY: "Low battery" voice prompt (less than 20%)
• Power Off: Chime

Charging

1. Open the USB cover and connect the cable to a computer or USB power source to charge the device. Ensure the power source is 5V or less. (Diagram: Earbud USB port cover opening. Diagram showing USB cable connected to earbuds and a computer USB port.)

2. The LED indicator will be solid red while charging and will turn blue when the device is fully charged. (Diagram: Charging status: red light for charging, blue light for fully charged.)

Fitting

1. Choose an ear tip size and optional Cush Fin. Try different ear tips to find the best fit for you. (Diagram: Different sizes of ear tips and the optional Cush Fin.)

2. Position the earbud in your ear using the adjustable ear tip placement. (Diagram: Earbud placement in the ear.)

3. Start from the back and rotate around the ear to secure the fit. (Diagram: Illustrating the rotation motion to secure the earbud.)

4. Secure the cable in front, back, and below using the included cable clip. (Diagram: Cable management with clips.)

Cable Clip Usage

1. Attach the clip near the middle of the cable. (Diagram: Cable clip being attached to the cable.)

2. Clip onto your shirt, front or back. (Diagram: Clip attached to a shirt, front and back views.)

Troubleshooting Connection Issues

Cannot See JLab BT on My Device

1. In your device's settings, turn Bluetooth off and then on again. (Diagram: Phone screen showing Bluetooth settings. Step 1: Bluetooth toggle OFF then ON.)

2. If you still do not see JLab BT, repeat the FIRST SETUP: PAIRING VIA BLUETOOTH instructions. (Diagram: Phone screen showing Bluetooth settings. Step 2: Repeat pairing.)

JLab BT Does Not Reconnect to My Device After Powering On

1. In your device's settings, select the option to forget the JLab BT device. (Diagram: Phone screen showing Bluetooth settings. Step 1: Forget device.)

2. In your device's settings, turn Bluetooth off and then on again. (Diagram: Phone screen showing Bluetooth settings. Step 2: Bluetooth OFF/ON.)

3. Repeat the FIRST SETUP: PAIRING VIA BLUETOOTH instructions. (Diagram: Phone screen showing Bluetooth settings. Step 3: Repeat pairing.)

Bluetooth Connects to an Unwanted Device

Note: JLab BT can remember up to 8 devices. It will attempt to automatically connect to the last used device.

1. If you have more than one device paired with the JLab BT earbuds, turn off Bluetooth on the devices you do not wish to use, and turn on Bluetooth on the desired device. (Diagram: Phone screen showing Bluetooth settings with multiple devices.)

2. Press and hold the button for 10 seconds. Release the button. The LED indicator will flash red and blue, indicating pairing mode. Select "JLab BT" in the desired device's Bluetooth settings. The LED indicator will slowly flash blue during pairing via Bluetooth. (Diagram: Phone screen showing Bluetooth settings and the earbud pairing process.)

Warnings

Ensure the USB cover is closed and secured. This provides protection from sweat and water damage. (Diagram: Earbud USB port cover closed.)

The Fit Sport 3 earbuds must be completely dry before charging. If exposed to moisture, internal components may be damaged. It is best to air dry them before charging. (Diagram: Earbuds being air-dried.)

Caution

• Avoid moisture or liquid entering the ear tip or charging port.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds, straining the cable with quick pulls or extreme force, or bending the cable at sharp angles.
• Earwax may accumulate on the ear tips, causing reduced sound quality. Carefully remove wax with a cotton swab or other small tool to restore sound quality.
• If you experience discomfort or pain, try lowering the volume or temporarily discontinue use of the earbuds.
• If you experience persistent discomfort while using this product, discontinue use and consult a doctor.

Resources

Buy Products | Product Notices | Break in Your Earbuds

JLab Audio + Burn-in Tool

Download on the App Store

Get it on Google Play

Visit us at intl.jlabaudio.com